// SPDX-License-Identifier: MIT
pragma solidity 0.8.28;

import "@limitbreak/creator-token-contracts/contracts/erc721c/ERC721C.sol";
import "@limitbreak/creator-token-contracts/contracts/programmable-royalties/BasicRoyalties.sol";
import "@limitbreak/creator-token-contracts/contracts/access/OwnableInitializable.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";

import "./utils/Withdrawable.sol";
import "./utils/Versioning.sol";

/// @title BleverErc721C Contract with Minting Phases and Signature Verification
/// @notice This contract allows for minting ERC721 tokens in phases with signature-based access control.
/// @dev Utilizes OpenZeppelin's upgradeable contract libraries, cryptography, and reentrancy protection.
contract BleverErc721C is
    ERC721CInitializable,
    BasicRoyaltiesInitializable,
    OwnableInitializable,
    ReentrancyGuard,
    Withdrawable,
    Versioning
{
    using ECDSA for bytes32;

    /// @notice Stores the statistics of each phase, including total minted and per-user mints.
    struct PhaseStats {
        uint256 mintedTotal;
        mapping(address => uint256) mintedByUser;
    }

    string public baseURI; // Base URI for the token metadata
    uint256 public supply; // Maximum token supply
    uint256 public minted; // Current number of tokens minted
    address public signer; // Authorized signer for minting
    mapping(bytes32 => PhaseStats) public phasesStats; // Tracks stats for each phase
    mapping(bytes32 => bool) public nonces; // Tracks used nonces to prevent replay attacks

    constructor() ReentrancyGuard() ERC721("", "") {}

    /// @notice Initializes the BleverErc721 contract.
    /// @dev Calls the initializer functions of the parent contracts and sets the initial parameters.
    /// @param _name The name of the ERC721 token.
    /// @param _symbol The symbol of the ERC721 token.
    /// @param _baseUri The base URI for token metadata.
    /// @param _supply The maximum supply of tokens.
    /// @param _signer The address of the authorized signer for minting.
    /// @param _owner The address of the owner of the contract.
    function initialize(
        string memory _name,
        string memory _symbol,
        string memory _baseUri,
        uint256 _supply,
        address _signer,
        address _owner,
        address _royaltyReceiver,
        uint96 _royaltyFeeNumerator
    ) public {
        require(_supply > 0, "Supply must be greater than 0");
        require(_signer != address(0), "Invalid signer");
        require(_owner != address(0), "Invalid owner");
        require(bytes(_baseUri).length > 0, "Invalid base URI");

        initializeOwner(msg.sender);
        initializeERC721(_name, _symbol);
        // setToDefaultSecurityPolicy();

        _setDefaultRoyalty(_royaltyReceiver, _royaltyFeeNumerator);
        _setVersion("1.0.0");

        transferOwnership(_owner);

        supply = _supply;
        minted = 0;
        signer = _signer;
        baseURI = _baseUri;
    }

    /// @notice Mints tokens to a specified address.
    /// @dev Verifies signature, checks nonce, and validates phase constraints before minting.
    /// @param _to The address to mint the tokens to.
    /// @param _amount The number of tokens to mint.
    /// @param _phaseID The identifier for the current minting phase.
    /// @param _price The price per token for minting.
    /// @param _maxPerTx The maximum number of tokens allowed per transaction.
    /// @param _maxPerUser The maximum number of tokens allowed per user for the phase.
    /// @param _maxPerPhase The total maximum number of tokens allowed for the phase.
    /// @param _nonce A unique identifier to prevent replay attacks.
    /// @param _signature The cryptographic signature for verifying the minting request.
    function mint(
        address _to,
        uint256 _amount,
        bytes32 _phaseID,
        uint256 _price,
        uint256 _maxPerTx,
        uint256 _maxPerUser,
        uint256 _maxPerPhase,
        bytes32 _nonce,
        bytes memory _signature
    ) external payable nonReentrant {
        require(msg.sender == tx.origin, "No contract interaction");
        require(_amount > 0, "Amount must be greater than 0");
        require(totalSupply() + _amount <= supply, "Exceeds max supply");
        require(msg.value >= _price * _amount, "Insufficient funds");
        require(isValidNonce(_nonce), "Invalid nonce");

        nonces[_nonce] = true;

        bytes32 message = getMessageHash(
            _to,
            _amount,
            _phaseID,
            _price,
            _maxPerTx,
            _maxPerUser,
            _maxPerPhase,
            _nonce
        );
        require(
            _verifySignature(message, _signature, signer),
            "Invalid signature"
        );

        _checkPhaseConstraints(
            _to,
            _amount,
            _phaseID,
            _maxPerTx,
            _maxPerUser,
            _maxPerPhase
        );

        uint256 _tokenId = totalSupply();
        minted += _amount;
        for (uint256 i = 0; i < _amount; i++) {
            _safeMint(_to, _tokenId);
            _tokenId++;
        }
    }

    /// @notice Generates the hash of the minting parameters.
    /// @param _to The address to mint the tokens to.
    /// @param _amount The number of tokens to mint.
    /// @param _phaseID The identifier for the current minting phase.
    /// @param _price The price per token for minting.
    /// @param _maxPerTx The maximum number of tokens allowed per transaction.
    /// @param _maxPerUser The maximum number of tokens allowed per user for the phase.
    /// @param _maxPerPhase The total maximum number of tokens allowed for the phase.
    /// @param _nonce A unique identifier to prevent replay attacks.
    /// @return The generated message hash.
    function getMessageHash(
        address _to,
        uint256 _amount,
        bytes32 _phaseID,
        uint256 _price,
        uint256 _maxPerTx,
        uint256 _maxPerUser,
        uint256 _maxPerPhase,
        bytes32 _nonce
    ) public pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    _to,
                    _amount,
                    _phaseID,
                    _price,
                    _maxPerTx,
                    _maxPerUser,
                    _maxPerPhase,
                    _nonce
                )
            );
    }

    /// @notice Verifies the cryptographic signature.
    /// @param data The hash of the data to verify.
    /// @param signature The signature to verify.
    /// @param account The address expected to have signed the data.
    /// @return True if the signature is valid, false otherwise.
    function _verifySignature(
        bytes32 data,
        bytes memory signature,
        address account
    ) internal pure returns (bool) {
        return data.toEthSignedMessageHash().recover(signature) == account;
    }

    /// @notice Returns the total number of tokens minted by a user in a specific phase.
    /// @param _user The address of the user.
    /// @param _phaseID The identifier for the minting phase.
    /// @return The number of tokens minted by the user in the phase.
    function mintedByUser(
        address _user,
        bytes32 _phaseID
    ) public view returns (uint256) {
        return phasesStats[_phaseID].mintedByUser[_user];
    }

    /// @notice Returns the total number of tokens minted in a specific phase.
    /// @param _phaseID The identifier for the minting phase.
    /// @return The total number of tokens minted in the phase.
    function mintedTotal(bytes32 _phaseID) public view returns (uint256) {
        return phasesStats[_phaseID].mintedTotal;
    }

    /// @notice Checks if the phase constraints for minting are respected.
    /// @dev Ensures that the amount minted doesn't exceed phase or user limits.
    /// @param _to The address to mint the tokens to.
    /// @param _amount The number of tokens to mint.
    /// @param _phaseID The identifier for the current minting phase.
    /// @param _maxPerTx The maximum number of tokens allowed per transaction.
    /// @param _maxPerUser The maximum number of tokens allowed per user for the phase.
    /// @param _maxPerPhase The total maximum number of tokens allowed for the phase.
    function _checkPhaseConstraints(
        address _to,
        uint256 _amount,
        bytes32 _phaseID,
        uint256 _maxPerTx,
        uint256 _maxPerUser,
        uint256 _maxPerPhase
    ) internal {
        PhaseStats storage currentPhaseStats = phasesStats[_phaseID];

        if (_maxPerTx > 0) {
            require(_maxPerTx >= _amount, "Exceeds max per tx");
        }

        if (_maxPerUser > 0) {
            require(
                currentPhaseStats.mintedByUser[_to] + _amount <= _maxPerUser,
                "Exceeds max per user"
            );
        }

        if (_maxPerPhase > 0) {
            require(
                currentPhaseStats.mintedTotal + _amount <= _maxPerPhase,
                "Exceeds max per phase"
            );
        }

        currentPhaseStats.mintedTotal += _amount;
        currentPhaseStats.mintedByUser[_to] += _amount;
    }

    /// @notice Checks if the nonce is valid and hasn't been used.
    /// @param _nonce The nonce to check.
    /// @return True if the nonce is valid, false otherwise.
    function isValidNonce(bytes32 _nonce) public view returns (bool) {
        return !nonces[_nonce];
    }

    /// @notice Returns the total number of tokens minted.
    /// @return The current total minted tokens.
    function totalSupply() public view returns (uint256) {
        return minted;
    }

    /// @notice Returns the base URI for token metadata.
    /// @dev Overrides the internal _baseURI function from ERC721Upgradeable.
    /// @return The base URI string.
    function _baseURI() internal view override returns (string memory) {
        return baseURI;
    }

    /// @notice Sets a new base URI for token metadata.
    /// @param _baseUri The new base URI string.
    function setBaseURI(string memory _baseUri) public {
        _requireCallerIsContractOwner();
        baseURI = _baseUri;
    }

    /// @notice Sets a new signer address for minting.
    /// @param _signer The new signer address.
    function setSigner(address _signer) public {
        _requireCallerIsContractOwner();

        require(_signer != address(0), "Invalid signer");
        signer = _signer;
    }

    /// @notice Allows the owner to set the royalties for the contract.
    /// @param receiver The address of the royalty receiver.
    /// @param feeNumerator The royalty fee numerator.
    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external {
        _requireCallerIsContractOwner();
        _setDefaultRoyalty(receiver, feeNumerator);
    }

    /// @notice Allows the owner to set the royalties for a specific token.
    /// @param tokenId The ID of the token.
    /// @param receiver The address of the royalty receiver.
    /// @param feeNumerator The royalty fee numerator.
    function setTokenRoyalty(
        uint256 tokenId,
        address receiver,
        uint96 feeNumerator
    ) external {
        _requireCallerIsContractOwner();
        _setTokenRoyalty(tokenId, receiver, feeNumerator);
    }

    /// @notice Allows the owner to withdraw the contract's balance.
    function withdraw() external {
        _requireCallerIsContractOwner();
        require(_withdraw(owner(), address(this).balance), "Withdraw failed");
    }

    /// @notice Allows the owner to withdraw ERC20 tokens from the contract.
    function withdrawERC20(
        address tokenAddress,
        address to,
        uint256 amount
    ) external {
        _requireCallerIsContractOwner();
        _withdrawERC20(tokenAddress, to, amount);
    }

    /// @notice Checks if the contract supports the given interface.
    /// @param interfaceId The interface ID to check.
    /// @return True if the interface is supported, false otherwise.
    function supportsInterface(
        bytes4 interfaceId
    )
        public
        view
        virtual
        override(ERC721CInitializable, ERC2981)
        returns (bool)
    {
        return super.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

import "./OwnablePermissions.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

abstract contract OwnableInitializable is OwnablePermissions, Ownable {

    error InitializableOwnable__OwnerAlreadyInitialized();

    bool private _ownerInitialized;

    /**
     * @dev When EIP-1167 is used to clone a contract that inherits Ownable permissions,
     * this is required to assign the initial contract owner, as the constructor is
     * not called during the cloning process.
     */
    function initializeOwner(address owner_) public {
      if (owner() != address(0) || _ownerInitialized) {
          revert InitializableOwnable__OwnerAlreadyInitialized();
      }

      _transferOwnership(owner_);
    }

    function _requireCallerIsContractOwner() internal view virtual override {
        _checkOwner();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/utils/Context.sol";

abstract contract OwnablePermissions is Context {
    function _requireCallerIsContractOwner() internal view virtual;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../utils/CreatorTokenBase.sol";
import "../token/erc721/ERC721OpenZeppelin.sol";

/**
 * @title ERC721C
 * @author Limit Break, Inc.
 * @notice Extends OpenZeppelin's ERC721 implementation with Creator Token functionality, which
 *         allows the contract owner to update the transfer validation logic by managing a security policy in
 *         an external transfer validation security policy registry.  See {CreatorTokenTransferValidator}.
 */
abstract contract ERC721C is ERC721OpenZeppelin, CreatorTokenBase {

    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId);
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateBeforeTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateAfterTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }
}

/**
 * @title ERC721CInitializable
 * @author Limit Break, Inc.
 * @notice Initializable implementation of ERC721C to allow for EIP-1167 proxy clones.
 */
abstract contract ERC721CInitializable is ERC721OpenZeppelinInitializable, CreatorTokenBase {
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId);
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateBeforeTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize) internal virtual override {
        for (uint256 i = 0; i < batchSize;) {
            _validateAfterTransfer(from, to, firstTokenId + i);
            unchecked {
                ++i;
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../interfaces/ICreatorTokenTransferValidator.sol";

interface ICreatorToken {
    event TransferValidatorUpdated(address oldValidator, address newValidator);

    function getTransferValidator() external view returns (ICreatorTokenTransferValidator);
    function getSecurityPolicy() external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators() external view returns (address[] memory);
    function getPermittedContractReceivers() external view returns (address[] memory);
    function isOperatorWhitelisted(address operator) external view returns (bool);
    function isContractReceiverPermitted(address receiver) external view returns (bool);
    function isTransferAllowed(address caller, address from, address to) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "./IEOARegistry.sol";
import "./ITransferSecurityRegistry.sol";
import "./ITransferValidator.sol";

interface ICreatorTokenTransferValidator is ITransferSecurityRegistry, ITransferValidator, IEOARegistry {}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

interface IEOARegistry is IERC165 {
    function isVerifiedEOA(address account) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../utils/TransferPolicy.sol";

interface ITransferSecurityRegistry {
    event AddedToAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event CreatedAllowlist(AllowlistTypes indexed kind, uint256 indexed id, string indexed name);
    event ReassignedAllowlistOwnership(AllowlistTypes indexed kind, uint256 indexed id, address indexed newOwner);
    event RemovedFromAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event SetAllowlist(AllowlistTypes indexed kind, address indexed collection, uint120 indexed id);
    event SetTransferSecurityLevel(address indexed collection, TransferSecurityLevels level);

    function createOperatorWhitelist(string calldata name) external returns (uint120);
    function createPermittedContractReceiverAllowlist(string calldata name) external returns (uint120);
    function reassignOwnershipOfOperatorWhitelist(uint120 id, address newOwner) external;
    function reassignOwnershipOfPermittedContractReceiverAllowlist(uint120 id, address newOwner) external;
    function renounceOwnershipOfOperatorWhitelist(uint120 id) external;
    function renounceOwnershipOfPermittedContractReceiverAllowlist(uint120 id) external;
    function setTransferSecurityLevelOfCollection(address collection, TransferSecurityLevels level) external;
    function setOperatorWhitelistOfCollection(address collection, uint120 id) external;
    function setPermittedContractReceiverAllowlistOfCollection(address collection, uint120 id) external;
    function addOperatorToWhitelist(uint120 id, address operator) external;
    function addPermittedContractReceiverToAllowlist(uint120 id, address receiver) external;
    function removeOperatorFromWhitelist(uint120 id, address operator) external;
    function removePermittedContractReceiverFromAllowlist(uint120 id, address receiver) external;
    function getCollectionSecurityPolicy(address collection) external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators(uint120 id) external view returns (address[] memory);
    function getPermittedContractReceivers(uint120 id) external view returns (address[] memory);
    function isOperatorWhitelisted(uint120 id, address operator) external view returns (bool);
    function isContractReceiverPermitted(uint120 id, address receiver) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../utils/TransferPolicy.sol";

interface ITransferValidator {
    function applyCollectionTransferPolicy(address caller, address from, address to) external view;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/token/common/ERC2981.sol";

/**
 * @title BasicRoyaltiesBase
 * @author Limit Break, Inc.
 * @dev Base functionality of an NFT mix-in contract implementing the most basic form of programmable royalties.
 */
abstract contract BasicRoyaltiesBase is ERC2981 {

    event DefaultRoyaltySet(address indexed receiver, uint96 feeNumerator);
    event TokenRoyaltySet(uint256 indexed tokenId, address indexed receiver, uint96 feeNumerator);

    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual override {
        super._setDefaultRoyalty(receiver, feeNumerator);
        emit DefaultRoyaltySet(receiver, feeNumerator);
    }

    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual override {
        super._setTokenRoyalty(tokenId, receiver, feeNumerator);
        emit TokenRoyaltySet(tokenId, receiver, feeNumerator);
    }
}

/**
 * @title BasicRoyalties
 * @author Limit Break, Inc.
 * @notice Constructable BasicRoyalties Contract implementation.
 */
abstract contract BasicRoyalties is BasicRoyaltiesBase {
    constructor(address receiver, uint96 feeNumerator) {
        _setDefaultRoyalty(receiver, feeNumerator);
    }
}

/**
 * @title BasicRoyaltiesInitializable
 * @author Limit Break, Inc.
 * @notice Initializable BasicRoyalties Contract implementation to allow for EIP-1167 clones. 
 */
abstract contract BasicRoyaltiesInitializable is BasicRoyaltiesBase {}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

import "../../access/OwnablePermissions.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";

abstract contract ERC721OpenZeppelinBase is ERC721 {

    // Token name
    string internal _contractName;

    // Token symbol
    string internal _contractSymbol;

    function name() public view virtual override returns (string memory) {
        return _contractName;
    }

    function symbol() public view virtual override returns (string memory) {
        return _contractSymbol;
    }

    function _setNameAndSymbol(string memory name_, string memory symbol_) internal {
        _contractName = name_;
        _contractSymbol = symbol_;
    }
}

abstract contract ERC721OpenZeppelin is ERC721OpenZeppelinBase {
    constructor(string memory name_, string memory symbol_) ERC721("", "") {
        _setNameAndSymbol(name_, symbol_);
    }
}

abstract contract ERC721OpenZeppelinInitializable is OwnablePermissions, ERC721OpenZeppelinBase {

    error ERC721OpenZeppelinInitializable__AlreadyInitializedERC721();

    /// @notice Specifies whether or not the contract is initialized
    bool private _erc721Initialized;

    /// @dev Initializes parameters of ERC721 tokens.
    /// These cannot be set in the constructor because this contract is optionally compatible with EIP-1167.
    function initializeERC721(string memory name_, string memory symbol_) public {
        _requireCallerIsContractOwner();

        if(_erc721Initialized) {
            revert ERC721OpenZeppelinInitializable__AlreadyInitializedERC721();
        }

        _erc721Initialized = true;

        _setNameAndSymbol(name_, symbol_);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../access/OwnablePermissions.sol";
import "../interfaces/ICreatorToken.sol";
import "../interfaces/ICreatorTokenTransferValidator.sol";
import "../utils/TransferValidation.sol";
import "@openzeppelin/contracts/interfaces/IERC165.sol";

/**
 * @title CreatorTokenBase
 * @author Limit Break, Inc.
 * @notice CreatorTokenBase is an abstract contract that provides basic functionality for managing token 
 * transfer policies through an implementation of ICreatorTokenTransferValidator. This contract is intended to be used
 * as a base for creator-specific token contracts, enabling customizable transfer restrictions and security policies.
 *
 * <h4>Features:</h4>
 * <ul>Ownable: This contract can have an owner who can set and update the transfer validator.</ul>
 * <ul>TransferValidation: Implements the basic token transfer validation interface.</ul>
 * <ul>ICreatorToken: Implements the interface for creator tokens, providing view functions for token security policies.</ul>
 *
 * <h4>Benefits:</h4>
 * <ul>Provides a flexible and modular way to implement custom token transfer restrictions and security policies.</ul>
 * <ul>Allows creators to enforce policies such as whitelisted operators and permitted contract receivers.</ul>
 * <ul>Can be easily integrated into other token contracts as a base contract.</ul>
 *
 * <h4>Intended Usage:</h4>
 * <ul>Use as a base contract for creator token implementations that require advanced transfer restrictions and 
 *   security policies.</ul>
 * <ul>Set and update the ICreatorTokenTransferValidator implementation contract to enforce desired policies for the 
 *   creator token.</ul>
 */
abstract contract CreatorTokenBase is OwnablePermissions, TransferValidation, ICreatorToken {
    
    error CreatorTokenBase__InvalidTransferValidatorContract();
    error CreatorTokenBase__SetTransferValidatorFirst();

    address public constant DEFAULT_TRANSFER_VALIDATOR = address(0x0000721C310194CcfC01E523fc93C9cCcFa2A0Ac);
    TransferSecurityLevels public constant DEFAULT_TRANSFER_SECURITY_LEVEL = TransferSecurityLevels.One;
    uint120 public constant DEFAULT_OPERATOR_WHITELIST_ID = uint120(1);

    ICreatorTokenTransferValidator private transferValidator;

    /**
     * @notice Allows the contract owner to set the transfer validator to the official validator contract
     *         and set the security policy to the recommended default settings.
     * @dev    May be overridden to change the default behavior of an individual collection.
     */
    function setToDefaultSecurityPolicy() public virtual {
        _requireCallerIsContractOwner();
        setTransferValidator(DEFAULT_TRANSFER_VALIDATOR);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setTransferSecurityLevelOfCollection(address(this), DEFAULT_TRANSFER_SECURITY_LEVEL);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setOperatorWhitelistOfCollection(address(this), DEFAULT_OPERATOR_WHITELIST_ID);
    }

    /**
     * @notice Allows the contract owner to set the transfer validator to a custom validator contract
     *         and set the security policy to their own custom settings.
     */
    function setToCustomValidatorAndSecurityPolicy(
        address validator, 
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        setTransferValidator(validator);

        ICreatorTokenTransferValidator(validator).
            setTransferSecurityLevelOfCollection(address(this), level);

        ICreatorTokenTransferValidator(validator).
            setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);

        ICreatorTokenTransferValidator(validator).
            setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Allows the contract owner to set the security policy to their own custom settings.
     * @dev    Reverts if the transfer validator has not been set.
     */
    function setToCustomSecurityPolicy(
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        ICreatorTokenTransferValidator validator = getTransferValidator();
        if (address(validator) == address(0)) {
            revert CreatorTokenBase__SetTransferValidatorFirst();
        }

        validator.setTransferSecurityLevelOfCollection(address(this), level);
        validator.setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);
        validator.setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Sets the transfer validator for the token contract.
     *
     * @dev    Throws when provided validator contract is not the zero address and doesn't support 
     *         the ICreatorTokenTransferValidator interface. 
     * @dev    Throws when the caller is not the contract owner.
     *
     * @dev    <h4>Postconditions:</h4>
     *         1. The transferValidator address is updated.
     *         2. The `TransferValidatorUpdated` event is emitted.
     *
     * @param transferValidator_ The address of the transfer validator contract.
     */
    function setTransferValidator(address transferValidator_) public {
        _requireCallerIsContractOwner();

        bool isValidTransferValidator = false;

        if(transferValidator_.code.length > 0) {
            try IERC165(transferValidator_).supportsInterface(type(ICreatorTokenTransferValidator).interfaceId) 
                returns (bool supportsInterface) {
                isValidTransferValidator = supportsInterface;
            } catch {}
        }

        if(transferValidator_ != address(0) && !isValidTransferValidator) {
            revert CreatorTokenBase__InvalidTransferValidatorContract();
        }

        emit TransferValidatorUpdated(address(transferValidator), transferValidator_);

        transferValidator = ICreatorTokenTransferValidator(transferValidator_);
    }

    /**
     * @notice Returns the transfer validator contract address for this token contract.
     */
    function getTransferValidator() public view override returns (ICreatorTokenTransferValidator) {
        return transferValidator;
    }

    /**
     * @notice Returns the security policy for this token contract, which includes:
     *         Transfer security level, operator whitelist id, permitted contract receiver allowlist id.
     */
    function getSecurityPolicy() public view override returns (CollectionSecurityPolicy memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getCollectionSecurityPolicy(address(this));
        }

        return CollectionSecurityPolicy({
            transferSecurityLevel: TransferSecurityLevels.Zero,
            operatorWhitelistId: 0,
            permittedContractReceiversId: 0
        });
    }

    /**
     * @notice Returns the list of all whitelisted operators for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getWhitelistedOperators() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getWhitelistedOperators(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId);
        }

        return new address[](0);
    }

    /**
     * @notice Returns the list of permitted contract receivers for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getPermittedContractReceivers() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getPermittedContractReceivers(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId);
        }

        return new address[](0);
    }

    /**
     * @notice Checks if an operator is whitelisted for this token contract.
     * @param operator The address of the operator to check.
     */
    function isOperatorWhitelisted(address operator) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isOperatorWhitelisted(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId, operator);
        }

        return false;
    }

    /**
     * @notice Checks if a contract receiver is permitted for this token contract.
     * @param receiver The address of the receiver to check.
     */
    function isContractReceiverPermitted(address receiver) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isContractReceiverPermitted(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId, receiver);
        }

        return false;
    }

    /**
     * @notice Determines if a transfer is allowed based on the token contract's security policy.  Use this function
     *         to simulate whether or not a transfer made by the specified `caller` from the `from` address to the `to`
     *         address would be allowed by this token's security policy.
     *
     * @notice This function only checks the security policy restrictions and does not check whether token ownership
     *         or approvals are in place. 
     *
     * @param caller The address of the simulated caller.
     * @param from   The address of the sender.
     * @param to     The address of the receiver.
     * @return       True if the transfer is allowed, false otherwise.
     */
    function isTransferAllowed(address caller, address from, address to) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            try transferValidator.applyCollectionTransferPolicy(caller, from, to) {
                return true;
            } catch {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Pre-validates a token transfer, reverting if the transfer is not allowed by this token's security policy.
     *      Inheriting contracts are responsible for overriding the _beforeTokenTransfer function, or its equivalent
     *      and calling _validateBeforeTransfer so that checks can be properly applied during token transfers.
     *
     * @dev Throws when the transfer doesn't comply with the collection's transfer policy, if the transferValidator is
     *      set to a non-zero address.
     *
     * @param caller  The address of the caller.
     * @param from    The address of the sender.
     * @param to      The address of the receiver.
     */
    function _preValidateTransfer(
        address caller, 
        address from, 
        address to, 
        uint256 /*tokenId*/, 
        uint256 /*value*/) internal virtual override {
        if (address(transferValidator) != address(0)) {
            transferValidator.applyCollectionTransferPolicy(caller, from, to);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

enum AllowlistTypes {
    Operators,
    PermittedContractReceivers
}

enum ReceiverConstraints {
    None,
    NoCode,
    EOA
}

enum CallerConstraints {
    None,
    OperatorWhitelistEnableOTC,
    OperatorWhitelistDisableOTC
}

enum StakerConstraints {
    None,
    CallerIsTxOrigin,
    EOA
}

enum TransferSecurityLevels {
    Zero,
    One,
    Two,
    Three,
    Four,
    Five,
    Six
}

struct TransferSecurityPolicy {
    CallerConstraints callerConstraints;
    ReceiverConstraints receiverConstraints;
}

struct CollectionSecurityPolicy {
    TransferSecurityLevels transferSecurityLevel;
    uint120 operatorWhitelistId;
    uint120 permittedContractReceiversId;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/utils/Context.sol";

/**
 * @title TransferValidation
 * @author Limit Break, Inc.
 * @notice A mix-in that can be combined with ERC-721 contracts to provide more granular hooks.
 * Openzeppelin's ERC721 contract only provides hooks for before and after transfer.  This allows
 * developers to validate or customize transfers within the context of a mint, a burn, or a transfer.
 */
abstract contract TransferValidation is Context {
    
    error ShouldNotMintToBurnAddress();

    /// @dev Inheriting contracts should call this function in the _beforeTokenTransfer function to get more granular hooks.
    function _validateBeforeTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _preValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _preValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _preValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Inheriting contracts should call this function in the _afterTokenTransfer function to get more granular hooks.
    function _validateAfterTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _postValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _postValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _postValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Optional validation hook that fires before a mint
    function _preValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a mint
    function _postValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a burn
    function _preValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a burn
    function _postValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a transfer
    function _preValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a transfer
    function _postValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 *
 * _Available since v4.5._
 */
interface IERC2981 is IERC165 {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(
        uint256 tokenId,
        uint256 salePrice
    ) external view returns (address receiver, uint256 royaltyAmount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/common/ERC2981.sol)

pragma solidity ^0.8.0;

import "../../interfaces/IERC2981.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
 *
 * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
 * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
 *
 * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
 * fee is specified in basis points by default.
 *
 * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
 * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
 * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
 *
 * _Available since v4.5._
 */
abstract contract ERC2981 is IERC2981, ERC165 {
    struct RoyaltyInfo {
        address receiver;
        uint96 royaltyFraction;
    }

    RoyaltyInfo private _defaultRoyaltyInfo;
    mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(
        bytes4 interfaceId
    ) public view virtual override(IERC165, ERC165) returns (bool) {
        return
            interfaceId == type(IERC2981).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @inheritdoc IERC2981
     */
    function royaltyInfo(
        uint256 tokenId,
        uint256 salePrice
    ) public view virtual override returns (address, uint256) {
        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];

        if (royalty.receiver == address(0)) {
            royalty = _defaultRoyaltyInfo;
        }

        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) /
            _feeDenominator();

        return (royalty.receiver, royaltyAmount);
    }

    /**
     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
     * override.
     */
    function _feeDenominator() internal pure virtual returns (uint96) {
        return 10000;
    }

    /**
     * @dev Sets the royalty information that all ids in this contract will default to.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setDefaultRoyalty(
        address receiver,
        uint96 feeNumerator
    ) internal virtual {
        require(
            feeNumerator <= _feeDenominator(),
            "ERC2981: royalty fee will exceed salePrice"
        );
        require(receiver != address(0), "ERC2981: invalid receiver");

        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Removes default royalty information.
     */
    function _deleteDefaultRoyalty() internal virtual {
        delete _defaultRoyaltyInfo;
    }

    /**
     * @dev Sets the royalty information for a specific token id, overriding the global default.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setTokenRoyalty(
        uint256 tokenId,
        address receiver,
        uint96 feeNumerator
    ) internal virtual {
        require(
            feeNumerator <= _feeDenominator(),
            "ERC2981: royalty fee will exceed salePrice"
        );
        require(receiver != address(0), "ERC2981: Invalid parameters");

        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Resets royalty information for the token id back to the global default.
     */
    function _resetTokenRoyalty(uint256 tokenId) internal virtual {
        delete _tokenRoyaltyInfo[tokenId];
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _ownerOf(tokenId);
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner or approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _safeTransfer(from, to, tokenId, data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _ownerOf(tokenId) != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId, 1);

        // Check that tokenId was not minted by `_beforeTokenTransfer` hook
        require(!_exists(tokenId), "ERC721: token already minted");

        unchecked {
            // Will not overflow unless all 2**256 token ids are minted to the same owner.
            // Given that tokens are minted one by one, it is impossible in practice that
            // this ever happens. Might change if we allow batch minting.
            // The ERC fails to describe this case.
            _balances[to] += 1;
        }

        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId, 1);

        // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
        owner = ERC721.ownerOf(tokenId);

        // Clear approvals
        delete _tokenApprovals[tokenId];

        unchecked {
            // Cannot overflow, as that would require more tokens to be burned/transferred
            // out than the owner initially received through minting and transferring in.
            _balances[owner] -= 1;
        }
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId, 1);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId, 1);

        // Check that tokenId was not transferred by `_beforeTokenTransfer` hook
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");

        // Clear approvals from the previous owner
        delete _tokenApprovals[tokenId];

        unchecked {
            // `_balances[from]` cannot overflow for the same reason as described in `_burn`:
            // `from`'s balance is the number of token held, which is at least one before the current
            // transfer.
            // `_balances[to]` could overflow in the conditions described in `_mint`. That would require
            // all 2**256 token ids to be minted, which in practice is impossible.
            _balances[from] -= 1;
            _balances[to] += 1;
        }
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
     * - When `from` is zero, the tokens will be minted for `to`.
     * - When `to` is zero, ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
     * - When `from` is zero, the tokens were minted for `to`.
     * - When `to` is zero, ``from``'s tokens were burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {}

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * WARNING: Anyone calling this MUST ensure that the balances remain consistent with the ownership. The invariant
     * being that for any address `a` the value returned by `balanceOf(a)` must be equal to the number of tokens such
     * that `ownerOf(tokenId)` is `a`.
     */
    // solhint-disable-next-line func-name-mixedcase
    function __unsafe_increaseBalance(address account, uint256 amount) internal {
        _balances[account] += amount;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.28;

abstract contract Versioning {
    // The version of the contract
    string public version;

    constructor() {}

    // Set the version of the contract
    function _setVersion(string memory _version) internal {
        version = _version;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.28;

import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

abstract contract Withdrawable is ReentrancyGuard {
    using SafeERC20 for IERC20;

    event EtherWithdrawn(address indexed to, uint256 amount);
    event ERC20Withdrawn(
        address indexed token,
        address indexed to,
        uint256 amount
    );

    /// @notice Allows the withdrawal of Ether from the contract.
    /// @dev This function should be called by an access-controlled function in the inheriting contract.
    /// @param to The address to send the Ether to.
    /// @param amount The amount of Ether to withdraw.
    /// @return success Whether the withdrawal was successful.
    function _withdraw(
        address to,
        uint256 amount
    ) internal nonReentrant returns (bool success) {
        require(
            to != address(0),
            "Withdrawable: cannot withdraw to zero address"
        );
        require(amount > 0, "Withdrawable: cannot withdraw zero amount");
        require(
            amount <= address(this).balance,
            "Withdrawable: insufficient balance"
        );

        (success, ) = payable(to).call{value: amount}("");
        require(success, "Withdrawable: transfer failed");

        emit EtherWithdrawn(to, amount);
    }

    /// @notice Allows the withdrawal of ERC20 tokens from the contract.
    /// @dev This function should be called by an access-controlled function in the inheriting contract.
    /// @param tokenAddress The address of the ERC20 token to withdraw.
    /// @param to The address to send the tokens to.
    /// @param amount The amount of tokens to withdraw.
    function _withdrawERC20(
        address tokenAddress,
        address to,
        uint256 amount
    ) internal nonReentrant {
        require(
            tokenAddress != address(0),
            "Withdrawable: token address cannot be zero"
        );
        require(
            to != address(0),
            "Withdrawable: cannot withdraw to zero address"
        );
        require(amount > 0, "Withdrawable: cannot withdraw zero amount");

        IERC20 token = IERC20(tokenAddress);
        uint256 balance = token.balanceOf(address(this));
        require(amount <= balance, "Withdrawable: insufficient token balance");

        token.safeTransfer(to, amount);

        emit ERC20Withdrawn(tokenAddress, to, amount);
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 20000
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"CreatorTokenBase__InvalidTransferValidatorContract","type":"error"},{"inputs":[],"name":"CreatorTokenBase__SetTransferValidatorFirst","type":"error"},{"inputs":[],"name":"ERC721OpenZeppelinInitializable__AlreadyInitializedERC721","type":"error"},{"inputs":[],"name":"InitializableOwnable__OwnerAlreadyInitialized","type":"error"},{"inputs":[],"name":"ShouldNotMintToBurnAddress","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"DefaultRoyaltySet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ERC20Withdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EtherWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"TokenRoyaltySet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldValidator","type":"address"},{"indexed":false,"internalType":"address","name":"newValidator","type":"address"}],"name":"TransferValidatorUpdated","type":"event"},{"inputs":[],"name":"DEFAULT_OPERATOR_WHITELIST_ID","outputs":[{"internalType":"uint120","name":"","type":"uint120"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_TRANSFER_SECURITY_LEVEL","outputs":[{"internalType":"enum TransferSecurityLevels","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_TRANSFER_VALIDATOR","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes32","name":"_phaseID","type":"bytes32"},{"internalType":"uint256","name":"_price","type":"uint256"},{"internalType":"uint256","name":"_maxPerTx","type":"uint256"},{"internalType":"uint256","name":"_maxPerUser","type":"uint256"},{"internalType":"uint256","name":"_maxPerPhase","type":"uint256"},{"internalType":"bytes32","name":"_nonce","type":"bytes32"}],"name":"getMessageHash","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"getPermittedContractReceivers","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getSecurityPolicy","outputs":[{"components":[{"internalType":"enum TransferSecurityLevels","name":"transferSecurityLevel","type":"uint8"},{"internalType":"uint120","name":"operatorWhitelistId","type":"uint120"},{"internalType":"uint120","name":"permittedContractReceiversId","type":"uint120"}],"internalType":"struct CollectionSecurityPolicy","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTransferValidator","outputs":[{"internalType":"contract ICreatorTokenTransferValidator","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getWhitelistedOperators","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"string","name":"_baseUri","type":"string"},{"internalType":"uint256","name":"_supply","type":"uint256"},{"internalType":"address","name":"_signer","type":"address"},{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_royaltyReceiver","type":"address"},{"internalType":"uint96","name":"_royaltyFeeNumerator","type":"uint96"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"}],"name":"initializeERC721","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner_","type":"address"}],"name":"initializeOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"isContractReceiverPermitted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"isOperatorWhitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"isTransferAllowed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_nonce","type":"bytes32"}],"name":"isValidNonce","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes32","name":"_phaseID","type":"bytes32"},{"internalType":"uint256","name":"_price","type":"uint256"},{"internalType":"uint256","name":"_maxPerTx","type":"uint256"},{"internalType":"uint256","name":"_maxPerUser","type":"uint256"},{"internalType":"uint256","name":"_maxPerPhase","type":"uint256"},{"internalType":"bytes32","name":"_nonce","type":"bytes32"},{"internalType":"bytes","name":"_signature","type":"bytes"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"minted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_user","type":"address"},{"internalType":"bytes32","name":"_phaseID","type":"bytes32"}],"name":"mintedByUser","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_phaseID","type":"bytes32"}],"name":"mintedTotal","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"name":"nonces","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"name":"phasesStats","outputs":[{"internalType":"uint256","name":"mintedTotal","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_baseUri","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"setDefaultRoyalty","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_signer","type":"address"}],"name":"setSigner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"enum TransferSecurityLevels","name":"level","type":"uint8"},{"internalType":"uint120","name":"operatorWhitelistId","type":"uint120"},{"internalType":"uint120","name":"permittedContractReceiversAllowlistId","type":"uint120"}],"name":"setToCustomSecurityPolicy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"validator","type":"address"},{"internalType":"enum TransferSecurityLevels","name":"level","type":"uint8"},{"internalType":"uint120","name":"operatorWhitelistId","type":"uint120"},{"internalType":"uint120","name":"permittedContractReceiversAllowlistId","type":"uint120"}],"name":"setToCustomValidatorAndSecurityPolicy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"setToDefaultSecurityPolicy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"setTokenRoyalty","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"transferValidator_","type":"address"}],"name":"setTransferValidator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"signer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"supply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawERC20","outputs":[],"stateMutability":"nonpayable","type":"function"}]