ERC-721
Overview
Max Total Supply
4,444 pixelaped
Holders
816
Market
Onchain Market Cap
$0.00
Circulating Supply Market Cap
-
Other Info
Token Contract
Balance
5 pixelapedLoading...
Loading
Loading...
Loading
Loading...
Loading
Minimal Proxy Contract for 0xc0389d3242dedd6eb8dd3b8202823828e6031a6b
Contract Name:
BleverErc721C
Compiler Version
v0.8.28+commit.7893614a
Optimization Enabled:
Yes with 20000 runs
Other Settings:
paris EvmVersion
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: MIT pragma solidity 0.8.28; import "@limitbreak/creator-token-contracts/contracts/erc721c/ERC721C.sol"; import "@limitbreak/creator-token-contracts/contracts/programmable-royalties/BasicRoyalties.sol"; import "@limitbreak/creator-token-contracts/contracts/access/OwnableInitializable.sol"; import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol"; import "@openzeppelin/contracts/security/ReentrancyGuard.sol"; import "./utils/Withdrawable.sol"; import "./utils/Versioning.sol"; /// @title BleverErc721C Contract with Minting Phases and Signature Verification /// @notice This contract allows for minting ERC721 tokens in phases with signature-based access control. /// @dev Utilizes OpenZeppelin's upgradeable contract libraries, cryptography, and reentrancy protection. contract BleverErc721C is ERC721CInitializable, BasicRoyaltiesInitializable, OwnableInitializable, ReentrancyGuard, Withdrawable, Versioning { using ECDSA for bytes32; /// @notice Stores the statistics of each phase, including total minted and per-user mints. struct PhaseStats { uint256 mintedTotal; mapping(address => uint256) mintedByUser; } string public baseURI; // Base URI for the token metadata uint256 public supply; // Maximum token supply uint256 public firstTokenId; // First token ID uint256 public minted; // Current number of tokens minted address public signer; // Authorized signer for minting mapping(bytes32 => PhaseStats) public phasesStats; // Tracks stats for each phase mapping(bytes32 => bool) public nonces; // Tracks used nonces to prevent replay attacks constructor() ReentrancyGuard() ERC721("", "") {} /// @notice Initializes the BleverErc721 contract. /// @dev Calls the initializer functions of the parent contracts and sets the initial parameters. /// @param _name The name of the ERC721 token. /// @param _symbol The symbol of the ERC721 token. /// @param _baseUri The base URI for token metadata. /// @param _supply The maximum supply of tokens. /// @param _signer The address of the authorized signer for minting. /// @param _owner The address of the owner of the contract. function initialize( string memory _name, string memory _symbol, string memory _baseUri, uint256 _supply, uint256 _firstTokenId, address _signer, address _owner, address _royaltyReceiver, uint96 _royaltyFeeNumerator ) public { require(_supply > 0, "Supply must be greater than 0"); require(_signer != address(0), "Invalid signer"); require(_owner != address(0), "Invalid owner"); require(bytes(_baseUri).length > 0, "Invalid base URI"); initializeOwner(msg.sender); initializeERC721(_name, _symbol); _setDefaultRoyalty(_royaltyReceiver, _royaltyFeeNumerator); _setVersion("1.0.1"); transferOwnership(_owner); supply = _supply; minted = 0; signer = _signer; baseURI = _baseUri; firstTokenId = _firstTokenId; } /// @notice Mints tokens to a specified address. /// @dev Verifies signature, checks nonce, and validates phase constraints before minting. /// @param _to The address to mint the tokens to. /// @param _amount The number of tokens to mint. /// @param _phaseID The identifier for the current minting phase. /// @param _price The price per token for minting. /// @param _maxPerTx The maximum number of tokens allowed per transaction. /// @param _maxPerUser The maximum number of tokens allowed per user for the phase. /// @param _maxPerPhase The total maximum number of tokens allowed for the phase. /// @param _nonce A unique identifier to prevent replay attacks. /// @param _signature The cryptographic signature for verifying the minting request. function mint( address _to, uint256 _amount, bytes32 _phaseID, uint256 _price, uint256 _maxPerTx, uint256 _maxPerUser, uint256 _maxPerPhase, bytes32 _nonce, bytes memory _signature ) external payable nonReentrant { require(msg.sender == tx.origin, "No contract interaction"); require(_amount > 0, "Amount must be greater than 0"); require(totalSupply() + _amount <= supply, "Exceeds max supply"); require(msg.value >= _price * _amount, "Insufficient funds"); require(isValidNonce(_nonce), "Invalid nonce"); nonces[_nonce] = true; bytes32 message = getMessageHash( _to, _amount, _phaseID, _price, _maxPerTx, _maxPerUser, _maxPerPhase, _nonce ); require( _verifySignature(message, _signature, signer), "Invalid signature" ); _checkPhaseConstraints( _to, _amount, _phaseID, _maxPerTx, _maxPerUser, _maxPerPhase ); uint256 _tokenId = totalSupply() + firstTokenId; minted += _amount; for (uint256 i = 0; i < _amount; i++) { _safeMint(_to, _tokenId); _tokenId++; } } /// @notice Generates the hash of the minting parameters. /// @param _to The address to mint the tokens to. /// @param _amount The number of tokens to mint. /// @param _phaseID The identifier for the current minting phase. /// @param _price The price per token for minting. /// @param _maxPerTx The maximum number of tokens allowed per transaction. /// @param _maxPerUser The maximum number of tokens allowed per user for the phase. /// @param _maxPerPhase The total maximum number of tokens allowed for the phase. /// @param _nonce A unique identifier to prevent replay attacks. /// @return The generated message hash. function getMessageHash( address _to, uint256 _amount, bytes32 _phaseID, uint256 _price, uint256 _maxPerTx, uint256 _maxPerUser, uint256 _maxPerPhase, bytes32 _nonce ) public pure returns (bytes32) { return keccak256( abi.encodePacked( _to, _amount, _phaseID, _price, _maxPerTx, _maxPerUser, _maxPerPhase, _nonce ) ); } /// @notice Verifies the cryptographic signature. /// @param data The hash of the data to verify. /// @param signature The signature to verify. /// @param account The address expected to have signed the data. /// @return True if the signature is valid, false otherwise. function _verifySignature( bytes32 data, bytes memory signature, address account ) internal pure returns (bool) { return data.toEthSignedMessageHash().recover(signature) == account; } /// @notice Returns the total number of tokens minted by a user in a specific phase. /// @param _user The address of the user. /// @param _phaseID The identifier for the minting phase. /// @return The number of tokens minted by the user in the phase. function mintedByUser( address _user, bytes32 _phaseID ) public view returns (uint256) { return phasesStats[_phaseID].mintedByUser[_user]; } /// @notice Returns the total number of tokens minted in a specific phase. /// @param _phaseID The identifier for the minting phase. /// @return The total number of tokens minted in the phase. function mintedTotal(bytes32 _phaseID) public view returns (uint256) { return phasesStats[_phaseID].mintedTotal; } /// @notice Checks if the phase constraints for minting are respected. /// @dev Ensures that the amount minted doesn't exceed phase or user limits. /// @param _to The address to mint the tokens to. /// @param _amount The number of tokens to mint. /// @param _phaseID The identifier for the current minting phase. /// @param _maxPerTx The maximum number of tokens allowed per transaction. /// @param _maxPerUser The maximum number of tokens allowed per user for the phase. /// @param _maxPerPhase The total maximum number of tokens allowed for the phase. function _checkPhaseConstraints( address _to, uint256 _amount, bytes32 _phaseID, uint256 _maxPerTx, uint256 _maxPerUser, uint256 _maxPerPhase ) internal { PhaseStats storage currentPhaseStats = phasesStats[_phaseID]; if (_maxPerTx > 0) { require(_maxPerTx >= _amount, "Exceeds max per tx"); } if (_maxPerUser > 0) { require( currentPhaseStats.mintedByUser[_to] + _amount <= _maxPerUser, "Exceeds max per user" ); } if (_maxPerPhase > 0) { require( currentPhaseStats.mintedTotal + _amount <= _maxPerPhase, "Exceeds max per phase" ); } currentPhaseStats.mintedTotal += _amount; currentPhaseStats.mintedByUser[_to] += _amount; } /// @notice Checks if the nonce is valid and hasn't been used. /// @param _nonce The nonce to check. /// @return True if the nonce is valid, false otherwise. function isValidNonce(bytes32 _nonce) public view returns (bool) { return !nonces[_nonce]; } /// @notice Returns the total number of tokens minted. /// @return The current total minted tokens. function totalSupply() public view returns (uint256) { return minted; } /// @notice Returns the base URI for token metadata. /// @dev Overrides the internal _baseURI function from ERC721Upgradeable. /// @return The base URI string. function _baseURI() internal view override returns (string memory) { return baseURI; } /// @notice Sets a new base URI for token metadata. /// @param _baseUri The new base URI string. function setBaseURI(string memory _baseUri) public { _requireCallerIsContractOwner(); baseURI = _baseUri; } /// @notice Sets a new signer address for minting. /// @param _signer The new signer address. function setSigner(address _signer) public { _requireCallerIsContractOwner(); require(_signer != address(0), "Invalid signer"); signer = _signer; } /// @notice Allows the owner to set the royalties for the contract. /// @param receiver The address of the royalty receiver. /// @param feeNumerator The royalty fee numerator. function setDefaultRoyalty(address receiver, uint96 feeNumerator) external { _requireCallerIsContractOwner(); _setDefaultRoyalty(receiver, feeNumerator); } /// @notice Allows the owner to set the royalties for a specific token. /// @param tokenId The ID of the token. /// @param receiver The address of the royalty receiver. /// @param feeNumerator The royalty fee numerator. function setTokenRoyalty( uint256 tokenId, address receiver, uint96 feeNumerator ) external { _requireCallerIsContractOwner(); _setTokenRoyalty(tokenId, receiver, feeNumerator); } /// @notice Allows the owner to withdraw the contract's balance. function withdraw() external { _requireCallerIsContractOwner(); require(_withdraw(owner(), address(this).balance), "Withdraw failed"); } /// @notice Allows the owner to withdraw ERC20 tokens from the contract. function withdrawERC20( address tokenAddress, address to, uint256 amount ) external { _requireCallerIsContractOwner(); _withdrawERC20(tokenAddress, to, amount); } /// @notice Checks if the contract supports the given interface. /// @param interfaceId The interface ID to check. /// @return True if the interface is supported, false otherwise. function supportsInterface( bytes4 interfaceId ) public view virtual override(ERC721CInitializable, ERC2981) returns (bool) { return super.supportsInterface(interfaceId); } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "./OwnablePermissions.sol"; import "@openzeppelin/contracts/access/Ownable.sol"; abstract contract OwnableInitializable is OwnablePermissions, Ownable { error InitializableOwnable__OwnerAlreadyInitialized(); bool private _ownerInitialized; /** * @dev When EIP-1167 is used to clone a contract that inherits Ownable permissions, * this is required to assign the initial contract owner, as the constructor is * not called during the cloning process. */ function initializeOwner(address owner_) public { if (owner() != address(0) || _ownerInitialized) { revert InitializableOwnable__OwnerAlreadyInitialized(); } _transferOwnership(owner_); } function _requireCallerIsContractOwner() internal view virtual override { _checkOwner(); } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "@openzeppelin/contracts/utils/Context.sol"; abstract contract OwnablePermissions is Context { function _requireCallerIsContractOwner() internal view virtual; }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "../utils/CreatorTokenBase.sol"; import "../token/erc721/ERC721OpenZeppelin.sol"; /** * @title ERC721C * @author Limit Break, Inc. * @notice Extends OpenZeppelin's ERC721 implementation with Creator Token functionality, which * allows the contract owner to update the transfer validation logic by managing a security policy in * an external transfer validation security policy registry. See {CreatorTokenTransferValidator}. */ abstract contract ERC721C is ERC721OpenZeppelin, CreatorTokenBase { function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId); } /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic function _beforeTokenTransfer( address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual override { for (uint256 i = 0; i < batchSize;) { _validateBeforeTransfer(from, to, firstTokenId + i); unchecked { ++i; } } } /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic function _afterTokenTransfer( address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual override { for (uint256 i = 0; i < batchSize;) { _validateAfterTransfer(from, to, firstTokenId + i); unchecked { ++i; } } } } /** * @title ERC721CInitializable * @author Limit Break, Inc. * @notice Initializable implementation of ERC721C to allow for EIP-1167 proxy clones. */ abstract contract ERC721CInitializable is ERC721OpenZeppelinInitializable, CreatorTokenBase { function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId); } /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic function _beforeTokenTransfer( address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual override { for (uint256 i = 0; i < batchSize;) { _validateBeforeTransfer(from, to, firstTokenId + i); unchecked { ++i; } } } /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic function _afterTokenTransfer( address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual override { for (uint256 i = 0; i < batchSize;) { _validateAfterTransfer(from, to, firstTokenId + i); unchecked { ++i; } } } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "../interfaces/ICreatorTokenTransferValidator.sol"; interface ICreatorToken { event TransferValidatorUpdated(address oldValidator, address newValidator); function getTransferValidator() external view returns (ICreatorTokenTransferValidator); function getSecurityPolicy() external view returns (CollectionSecurityPolicy memory); function getWhitelistedOperators() external view returns (address[] memory); function getPermittedContractReceivers() external view returns (address[] memory); function isOperatorWhitelisted(address operator) external view returns (bool); function isContractReceiverPermitted(address receiver) external view returns (bool); function isTransferAllowed(address caller, address from, address to) external view returns (bool); }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "./IEOARegistry.sol"; import "./ITransferSecurityRegistry.sol"; import "./ITransferValidator.sol"; interface ICreatorTokenTransferValidator is ITransferSecurityRegistry, ITransferValidator, IEOARegistry {}
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "@openzeppelin/contracts/utils/introspection/IERC165.sol"; interface IEOARegistry is IERC165 { function isVerifiedEOA(address account) external view returns (bool); }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "../utils/TransferPolicy.sol"; interface ITransferSecurityRegistry { event AddedToAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account); event CreatedAllowlist(AllowlistTypes indexed kind, uint256 indexed id, string indexed name); event ReassignedAllowlistOwnership(AllowlistTypes indexed kind, uint256 indexed id, address indexed newOwner); event RemovedFromAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account); event SetAllowlist(AllowlistTypes indexed kind, address indexed collection, uint120 indexed id); event SetTransferSecurityLevel(address indexed collection, TransferSecurityLevels level); function createOperatorWhitelist(string calldata name) external returns (uint120); function createPermittedContractReceiverAllowlist(string calldata name) external returns (uint120); function reassignOwnershipOfOperatorWhitelist(uint120 id, address newOwner) external; function reassignOwnershipOfPermittedContractReceiverAllowlist(uint120 id, address newOwner) external; function renounceOwnershipOfOperatorWhitelist(uint120 id) external; function renounceOwnershipOfPermittedContractReceiverAllowlist(uint120 id) external; function setTransferSecurityLevelOfCollection(address collection, TransferSecurityLevels level) external; function setOperatorWhitelistOfCollection(address collection, uint120 id) external; function setPermittedContractReceiverAllowlistOfCollection(address collection, uint120 id) external; function addOperatorToWhitelist(uint120 id, address operator) external; function addPermittedContractReceiverToAllowlist(uint120 id, address receiver) external; function removeOperatorFromWhitelist(uint120 id, address operator) external; function removePermittedContractReceiverFromAllowlist(uint120 id, address receiver) external; function getCollectionSecurityPolicy(address collection) external view returns (CollectionSecurityPolicy memory); function getWhitelistedOperators(uint120 id) external view returns (address[] memory); function getPermittedContractReceivers(uint120 id) external view returns (address[] memory); function isOperatorWhitelisted(uint120 id, address operator) external view returns (bool); function isContractReceiverPermitted(uint120 id, address receiver) external view returns (bool); }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "../utils/TransferPolicy.sol"; interface ITransferValidator { function applyCollectionTransferPolicy(address caller, address from, address to) external view; }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "@openzeppelin/contracts/token/common/ERC2981.sol"; /** * @title BasicRoyaltiesBase * @author Limit Break, Inc. * @dev Base functionality of an NFT mix-in contract implementing the most basic form of programmable royalties. */ abstract contract BasicRoyaltiesBase is ERC2981 { event DefaultRoyaltySet(address indexed receiver, uint96 feeNumerator); event TokenRoyaltySet(uint256 indexed tokenId, address indexed receiver, uint96 feeNumerator); function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual override { super._setDefaultRoyalty(receiver, feeNumerator); emit DefaultRoyaltySet(receiver, feeNumerator); } function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual override { super._setTokenRoyalty(tokenId, receiver, feeNumerator); emit TokenRoyaltySet(tokenId, receiver, feeNumerator); } } /** * @title BasicRoyalties * @author Limit Break, Inc. * @notice Constructable BasicRoyalties Contract implementation. */ abstract contract BasicRoyalties is BasicRoyaltiesBase { constructor(address receiver, uint96 feeNumerator) { _setDefaultRoyalty(receiver, feeNumerator); } } /** * @title BasicRoyaltiesInitializable * @author Limit Break, Inc. * @notice Initializable BasicRoyalties Contract implementation to allow for EIP-1167 clones. */ abstract contract BasicRoyaltiesInitializable is BasicRoyaltiesBase {}
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "../../access/OwnablePermissions.sol"; import "@openzeppelin/contracts/token/ERC721/ERC721.sol"; abstract contract ERC721OpenZeppelinBase is ERC721 { // Token name string internal _contractName; // Token symbol string internal _contractSymbol; function name() public view virtual override returns (string memory) { return _contractName; } function symbol() public view virtual override returns (string memory) { return _contractSymbol; } function _setNameAndSymbol(string memory name_, string memory symbol_) internal { _contractName = name_; _contractSymbol = symbol_; } } abstract contract ERC721OpenZeppelin is ERC721OpenZeppelinBase { constructor(string memory name_, string memory symbol_) ERC721("", "") { _setNameAndSymbol(name_, symbol_); } } abstract contract ERC721OpenZeppelinInitializable is OwnablePermissions, ERC721OpenZeppelinBase { error ERC721OpenZeppelinInitializable__AlreadyInitializedERC721(); /// @notice Specifies whether or not the contract is initialized bool private _erc721Initialized; /// @dev Initializes parameters of ERC721 tokens. /// These cannot be set in the constructor because this contract is optionally compatible with EIP-1167. function initializeERC721(string memory name_, string memory symbol_) public { _requireCallerIsContractOwner(); if(_erc721Initialized) { revert ERC721OpenZeppelinInitializable__AlreadyInitializedERC721(); } _erc721Initialized = true; _setNameAndSymbol(name_, symbol_); } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "../access/OwnablePermissions.sol"; import "../interfaces/ICreatorToken.sol"; import "../interfaces/ICreatorTokenTransferValidator.sol"; import "../utils/TransferValidation.sol"; import "@openzeppelin/contracts/interfaces/IERC165.sol"; /** * @title CreatorTokenBase * @author Limit Break, Inc. * @notice CreatorTokenBase is an abstract contract that provides basic functionality for managing token * transfer policies through an implementation of ICreatorTokenTransferValidator. This contract is intended to be used * as a base for creator-specific token contracts, enabling customizable transfer restrictions and security policies. * * <h4>Features:</h4> * <ul>Ownable: This contract can have an owner who can set and update the transfer validator.</ul> * <ul>TransferValidation: Implements the basic token transfer validation interface.</ul> * <ul>ICreatorToken: Implements the interface for creator tokens, providing view functions for token security policies.</ul> * * <h4>Benefits:</h4> * <ul>Provides a flexible and modular way to implement custom token transfer restrictions and security policies.</ul> * <ul>Allows creators to enforce policies such as whitelisted operators and permitted contract receivers.</ul> * <ul>Can be easily integrated into other token contracts as a base contract.</ul> * * <h4>Intended Usage:</h4> * <ul>Use as a base contract for creator token implementations that require advanced transfer restrictions and * security policies.</ul> * <ul>Set and update the ICreatorTokenTransferValidator implementation contract to enforce desired policies for the * creator token.</ul> */ abstract contract CreatorTokenBase is OwnablePermissions, TransferValidation, ICreatorToken { error CreatorTokenBase__InvalidTransferValidatorContract(); error CreatorTokenBase__SetTransferValidatorFirst(); address public constant DEFAULT_TRANSFER_VALIDATOR = address(0x0000721C310194CcfC01E523fc93C9cCcFa2A0Ac); TransferSecurityLevels public constant DEFAULT_TRANSFER_SECURITY_LEVEL = TransferSecurityLevels.One; uint120 public constant DEFAULT_OPERATOR_WHITELIST_ID = uint120(1); ICreatorTokenTransferValidator private transferValidator; /** * @notice Allows the contract owner to set the transfer validator to the official validator contract * and set the security policy to the recommended default settings. * @dev May be overridden to change the default behavior of an individual collection. */ function setToDefaultSecurityPolicy() public virtual { _requireCallerIsContractOwner(); setTransferValidator(DEFAULT_TRANSFER_VALIDATOR); ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setTransferSecurityLevelOfCollection(address(this), DEFAULT_TRANSFER_SECURITY_LEVEL); ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setOperatorWhitelistOfCollection(address(this), DEFAULT_OPERATOR_WHITELIST_ID); } /** * @notice Allows the contract owner to set the transfer validator to a custom validator contract * and set the security policy to their own custom settings. */ function setToCustomValidatorAndSecurityPolicy( address validator, TransferSecurityLevels level, uint120 operatorWhitelistId, uint120 permittedContractReceiversAllowlistId) public { _requireCallerIsContractOwner(); setTransferValidator(validator); ICreatorTokenTransferValidator(validator). setTransferSecurityLevelOfCollection(address(this), level); ICreatorTokenTransferValidator(validator). setOperatorWhitelistOfCollection(address(this), operatorWhitelistId); ICreatorTokenTransferValidator(validator). setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId); } /** * @notice Allows the contract owner to set the security policy to their own custom settings. * @dev Reverts if the transfer validator has not been set. */ function setToCustomSecurityPolicy( TransferSecurityLevels level, uint120 operatorWhitelistId, uint120 permittedContractReceiversAllowlistId) public { _requireCallerIsContractOwner(); ICreatorTokenTransferValidator validator = getTransferValidator(); if (address(validator) == address(0)) { revert CreatorTokenBase__SetTransferValidatorFirst(); } validator.setTransferSecurityLevelOfCollection(address(this), level); validator.setOperatorWhitelistOfCollection(address(this), operatorWhitelistId); validator.setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId); } /** * @notice Sets the transfer validator for the token contract. * * @dev Throws when provided validator contract is not the zero address and doesn't support * the ICreatorTokenTransferValidator interface. * @dev Throws when the caller is not the contract owner. * * @dev <h4>Postconditions:</h4> * 1. The transferValidator address is updated. * 2. The `TransferValidatorUpdated` event is emitted. * * @param transferValidator_ The address of the transfer validator contract. */ function setTransferValidator(address transferValidator_) public { _requireCallerIsContractOwner(); bool isValidTransferValidator = false; if(transferValidator_.code.length > 0) { try IERC165(transferValidator_).supportsInterface(type(ICreatorTokenTransferValidator).interfaceId) returns (bool supportsInterface) { isValidTransferValidator = supportsInterface; } catch {} } if(transferValidator_ != address(0) && !isValidTransferValidator) { revert CreatorTokenBase__InvalidTransferValidatorContract(); } emit TransferValidatorUpdated(address(transferValidator), transferValidator_); transferValidator = ICreatorTokenTransferValidator(transferValidator_); } /** * @notice Returns the transfer validator contract address for this token contract. */ function getTransferValidator() public view override returns (ICreatorTokenTransferValidator) { return transferValidator; } /** * @notice Returns the security policy for this token contract, which includes: * Transfer security level, operator whitelist id, permitted contract receiver allowlist id. */ function getSecurityPolicy() public view override returns (CollectionSecurityPolicy memory) { if (address(transferValidator) != address(0)) { return transferValidator.getCollectionSecurityPolicy(address(this)); } return CollectionSecurityPolicy({ transferSecurityLevel: TransferSecurityLevels.Zero, operatorWhitelistId: 0, permittedContractReceiversId: 0 }); } /** * @notice Returns the list of all whitelisted operators for this token contract. * @dev This can be an expensive call and should only be used in view-only functions. */ function getWhitelistedOperators() public view override returns (address[] memory) { if (address(transferValidator) != address(0)) { return transferValidator.getWhitelistedOperators( transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId); } return new address[](0); } /** * @notice Returns the list of permitted contract receivers for this token contract. * @dev This can be an expensive call and should only be used in view-only functions. */ function getPermittedContractReceivers() public view override returns (address[] memory) { if (address(transferValidator) != address(0)) { return transferValidator.getPermittedContractReceivers( transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId); } return new address[](0); } /** * @notice Checks if an operator is whitelisted for this token contract. * @param operator The address of the operator to check. */ function isOperatorWhitelisted(address operator) public view override returns (bool) { if (address(transferValidator) != address(0)) { return transferValidator.isOperatorWhitelisted( transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId, operator); } return false; } /** * @notice Checks if a contract receiver is permitted for this token contract. * @param receiver The address of the receiver to check. */ function isContractReceiverPermitted(address receiver) public view override returns (bool) { if (address(transferValidator) != address(0)) { return transferValidator.isContractReceiverPermitted( transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId, receiver); } return false; } /** * @notice Determines if a transfer is allowed based on the token contract's security policy. Use this function * to simulate whether or not a transfer made by the specified `caller` from the `from` address to the `to` * address would be allowed by this token's security policy. * * @notice This function only checks the security policy restrictions and does not check whether token ownership * or approvals are in place. * * @param caller The address of the simulated caller. * @param from The address of the sender. * @param to The address of the receiver. * @return True if the transfer is allowed, false otherwise. */ function isTransferAllowed(address caller, address from, address to) public view override returns (bool) { if (address(transferValidator) != address(0)) { try transferValidator.applyCollectionTransferPolicy(caller, from, to) { return true; } catch { return false; } } return true; } /** * @dev Pre-validates a token transfer, reverting if the transfer is not allowed by this token's security policy. * Inheriting contracts are responsible for overriding the _beforeTokenTransfer function, or its equivalent * and calling _validateBeforeTransfer so that checks can be properly applied during token transfers. * * @dev Throws when the transfer doesn't comply with the collection's transfer policy, if the transferValidator is * set to a non-zero address. * * @param caller The address of the caller. * @param from The address of the sender. * @param to The address of the receiver. */ function _preValidateTransfer( address caller, address from, address to, uint256 /*tokenId*/, uint256 /*value*/) internal virtual override { if (address(transferValidator) != address(0)) { transferValidator.applyCollectionTransferPolicy(caller, from, to); } } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; enum AllowlistTypes { Operators, PermittedContractReceivers } enum ReceiverConstraints { None, NoCode, EOA } enum CallerConstraints { None, OperatorWhitelistEnableOTC, OperatorWhitelistDisableOTC } enum StakerConstraints { None, CallerIsTxOrigin, EOA } enum TransferSecurityLevels { Zero, One, Two, Three, Four, Five, Six } struct TransferSecurityPolicy { CallerConstraints callerConstraints; ReceiverConstraints receiverConstraints; } struct CollectionSecurityPolicy { TransferSecurityLevels transferSecurityLevel; uint120 operatorWhitelistId; uint120 permittedContractReceiversId; }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.4; import "@openzeppelin/contracts/utils/Context.sol"; /** * @title TransferValidation * @author Limit Break, Inc. * @notice A mix-in that can be combined with ERC-721 contracts to provide more granular hooks. * Openzeppelin's ERC721 contract only provides hooks for before and after transfer. This allows * developers to validate or customize transfers within the context of a mint, a burn, or a transfer. */ abstract contract TransferValidation is Context { error ShouldNotMintToBurnAddress(); /// @dev Inheriting contracts should call this function in the _beforeTokenTransfer function to get more granular hooks. function _validateBeforeTransfer(address from, address to, uint256 tokenId) internal virtual { bool fromZeroAddress = from == address(0); bool toZeroAddress = to == address(0); if(fromZeroAddress && toZeroAddress) { revert ShouldNotMintToBurnAddress(); } else if(fromZeroAddress) { _preValidateMint(_msgSender(), to, tokenId, msg.value); } else if(toZeroAddress) { _preValidateBurn(_msgSender(), from, tokenId, msg.value); } else { _preValidateTransfer(_msgSender(), from, to, tokenId, msg.value); } } /// @dev Inheriting contracts should call this function in the _afterTokenTransfer function to get more granular hooks. function _validateAfterTransfer(address from, address to, uint256 tokenId) internal virtual { bool fromZeroAddress = from == address(0); bool toZeroAddress = to == address(0); if(fromZeroAddress && toZeroAddress) { revert ShouldNotMintToBurnAddress(); } else if(fromZeroAddress) { _postValidateMint(_msgSender(), to, tokenId, msg.value); } else if(toZeroAddress) { _postValidateBurn(_msgSender(), from, tokenId, msg.value); } else { _postValidateTransfer(_msgSender(), from, to, tokenId, msg.value); } } /// @dev Optional validation hook that fires before a mint function _preValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {} /// @dev Optional validation hook that fires after a mint function _postValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {} /// @dev Optional validation hook that fires before a burn function _preValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {} /// @dev Optional validation hook that fires after a burn function _postValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {} /// @dev Optional validation hook that fires before a transfer function _preValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {} /// @dev Optional validation hook that fires after a transfer function _postValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {} }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol) pragma solidity ^0.8.0; import "../utils/Context.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract Ownable is Context { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby disabling any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol) pragma solidity ^0.8.0; import "../utils/introspection/IERC165.sol";
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC2981.sol) pragma solidity ^0.8.0; import "../utils/introspection/IERC165.sol"; /** * @dev Interface for the NFT Royalty Standard. * * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal * support for royalty payments across all NFT marketplaces and ecosystem participants. * * _Available since v4.5._ */ interface IERC2981 is IERC165 { /** * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of * exchange. The royalty amount is denominated and should be paid in that same unit of exchange. */ function royaltyInfo( uint256 tokenId, uint256 salePrice ) external view returns (address receiver, uint256 royaltyAmount); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol) pragma solidity ^0.8.0; /** * @dev Contract module that helps prevent reentrant calls to a function. * * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier * available, which can be applied to functions to make sure there are no nested * (reentrant) calls to them. * * Note that because there is a single `nonReentrant` guard, functions marked as * `nonReentrant` may not call one another. This can be worked around by making * those functions `private`, and then adding `external` `nonReentrant` entry * points to them. * * TIP: If you would like to learn more about reentrancy and alternative ways * to protect against it, check out our blog post * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul]. */ abstract contract ReentrancyGuard { // Booleans are more expensive than uint256 or any type that takes up a full // word because each write operation emits an extra SLOAD to first read the // slot's contents, replace the bits taken up by the boolean, and then write // back. This is the compiler's defense against contract upgrades and // pointer aliasing, and it cannot be disabled. // The values being non-zero value makes deployment a bit more expensive, // but in exchange the refund on every call to nonReentrant will be lower in // amount. Since refunds are capped to a percentage of the total // transaction's gas, it is best to keep them low in cases like this one, to // increase the likelihood of the full refund coming into effect. uint256 private constant _NOT_ENTERED = 1; uint256 private constant _ENTERED = 2; uint256 private _status; constructor() { _status = _NOT_ENTERED; } /** * @dev Prevents a contract from calling itself, directly or indirectly. * Calling a `nonReentrant` function from another `nonReentrant` * function is not supported. It is possible to prevent this from happening * by making the `nonReentrant` function external, and making it call a * `private` function that does the actual work. */ modifier nonReentrant() { _nonReentrantBefore(); _; _nonReentrantAfter(); } function _nonReentrantBefore() private { // On the first call to nonReentrant, _status will be _NOT_ENTERED require(_status != _ENTERED, "ReentrancyGuard: reentrant call"); // Any calls to nonReentrant after this point will fail _status = _ENTERED; } function _nonReentrantAfter() private { // By storing the original value once again, a refund is triggered (see // https://eips.ethereum.org/EIPS/eip-2200) _status = _NOT_ENTERED; } /** * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a * `nonReentrant` function in the call stack. */ function _reentrancyGuardEntered() internal view returns (bool) { return _status == _ENTERED; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (token/common/ERC2981.sol) pragma solidity ^0.8.0; import "../../interfaces/IERC2981.sol"; import "../../utils/introspection/ERC165.sol"; /** * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information. * * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first. * * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the * fee is specified in basis points by default. * * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported. * * _Available since v4.5._ */ abstract contract ERC2981 is IERC2981, ERC165 { struct RoyaltyInfo { address receiver; uint96 royaltyFraction; } RoyaltyInfo private _defaultRoyaltyInfo; mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo; /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface( bytes4 interfaceId ) public view virtual override(IERC165, ERC165) returns (bool) { return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId); } /** * @inheritdoc IERC2981 */ function royaltyInfo( uint256 tokenId, uint256 salePrice ) public view virtual override returns (address, uint256) { RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId]; if (royalty.receiver == address(0)) { royalty = _defaultRoyaltyInfo; } uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator(); return (royalty.receiver, royaltyAmount); } /** * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an * override. */ function _feeDenominator() internal pure virtual returns (uint96) { return 10000; } /** * @dev Sets the royalty information that all ids in this contract will default to. * * Requirements: * * - `receiver` cannot be the zero address. * - `feeNumerator` cannot be greater than the fee denominator. */ function _setDefaultRoyalty( address receiver, uint96 feeNumerator ) internal virtual { require( feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice" ); require(receiver != address(0), "ERC2981: invalid receiver"); _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator); } /** * @dev Removes default royalty information. */ function _deleteDefaultRoyalty() internal virtual { delete _defaultRoyaltyInfo; } /** * @dev Sets the royalty information for a specific token id, overriding the global default. * * Requirements: * * - `receiver` cannot be the zero address. * - `feeNumerator` cannot be greater than the fee denominator. */ function _setTokenRoyalty( uint256 tokenId, address receiver, uint96 feeNumerator ) internal virtual { require( feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice" ); require(receiver != address(0), "ERC2981: Invalid parameters"); _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator); } /** * @dev Resets royalty information for the token id back to the global default. */ function _resetTokenRoyalty(uint256 tokenId) internal virtual { delete _tokenRoyaltyInfo[tokenId]; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. * * ==== Security Considerations * * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be * considered as an intention to spend the allowance in any specific way. The second is that because permits have * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be * generally recommended is: * * ```solidity * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public { * try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {} * doThing(..., value); * } * * function doThing(..., uint256 value) public { * token.safeTransferFrom(msg.sender, address(this), value); * ... * } * ``` * * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also * {SafeERC20-safeTransferFrom}). * * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so * contracts should have entry points that don't rely on permit. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. * * CAUTION: See Security Considerations above. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 amount) external returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; /** * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeTransfer(IERC20 token, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } /** * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful. */ function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove(IERC20 token, address spender, uint256 value) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } /** * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 oldAllowance = token.allowance(address(this), spender); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value)); } /** * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value)); } } /** * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval * to be set to zero before setting it to a non-zero value, such as USDT. */ function forceApprove(IERC20 token, address spender, uint256 value) internal { bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value); if (!_callOptionalReturnBool(token, approvalCall)) { _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0)); _callOptionalReturn(token, approvalCall); } } /** * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`. * Revert on invalid signature. */ function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). * * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead. */ function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false // and not revert is the subcall reverts. (bool success, bytes memory returndata) = address(token).call(data); return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token)); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/ERC721.sol) pragma solidity ^0.8.0; import "./IERC721.sol"; import "./IERC721Receiver.sol"; import "./extensions/IERC721Metadata.sol"; import "../../utils/Address.sol"; import "../../utils/Context.sol"; import "../../utils/Strings.sol"; import "../../utils/introspection/ERC165.sol"; /** * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including * the Metadata extension, but not including the Enumerable extension, which is available separately as * {ERC721Enumerable}. */ contract ERC721 is Context, ERC165, IERC721, IERC721Metadata { using Address for address; using Strings for uint256; // Token name string private _name; // Token symbol string private _symbol; // Mapping from token ID to owner address mapping(uint256 => address) private _owners; // Mapping owner address to token count mapping(address => uint256) private _balances; // Mapping from token ID to approved address mapping(uint256 => address) private _tokenApprovals; // Mapping from owner to operator approvals mapping(address => mapping(address => bool)) private _operatorApprovals; /** * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) { return interfaceId == type(IERC721).interfaceId || interfaceId == type(IERC721Metadata).interfaceId || super.supportsInterface(interfaceId); } /** * @dev See {IERC721-balanceOf}. */ function balanceOf(address owner) public view virtual override returns (uint256) { require(owner != address(0), "ERC721: address zero is not a valid owner"); return _balances[owner]; } /** * @dev See {IERC721-ownerOf}. */ function ownerOf(uint256 tokenId) public view virtual override returns (address) { address owner = _ownerOf(tokenId); require(owner != address(0), "ERC721: invalid token ID"); return owner; } /** * @dev See {IERC721Metadata-name}. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev See {IERC721Metadata-symbol}. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev See {IERC721Metadata-tokenURI}. */ function tokenURI(uint256 tokenId) public view virtual override returns (string memory) { _requireMinted(tokenId); string memory baseURI = _baseURI(); return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : ""; } /** * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each * token will be the concatenation of the `baseURI` and the `tokenId`. Empty * by default, can be overridden in child contracts. */ function _baseURI() internal view virtual returns (string memory) { return ""; } /** * @dev See {IERC721-approve}. */ function approve(address to, uint256 tokenId) public virtual override { address owner = ERC721.ownerOf(tokenId); require(to != owner, "ERC721: approval to current owner"); require( _msgSender() == owner || isApprovedForAll(owner, _msgSender()), "ERC721: approve caller is not token owner or approved for all" ); _approve(to, tokenId); } /** * @dev See {IERC721-getApproved}. */ function getApproved(uint256 tokenId) public view virtual override returns (address) { _requireMinted(tokenId); return _tokenApprovals[tokenId]; } /** * @dev See {IERC721-setApprovalForAll}. */ function setApprovalForAll(address operator, bool approved) public virtual override { _setApprovalForAll(_msgSender(), operator, approved); } /** * @dev See {IERC721-isApprovedForAll}. */ function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) { return _operatorApprovals[owner][operator]; } /** * @dev See {IERC721-transferFrom}. */ function transferFrom(address from, address to, uint256 tokenId) public virtual override { //solhint-disable-next-line max-line-length require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved"); _transfer(from, to, tokenId); } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override { safeTransferFrom(from, to, tokenId, ""); } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual override { require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved"); _safeTransfer(from, to, tokenId, data); } /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients * are aware of the ERC721 protocol to prevent tokens from being forever locked. * * `data` is additional data, it has no specified format and it is sent in call to `to`. * * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g. * implement alternative mechanisms to perform token transfer, such as signature-based. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual { _transfer(from, to, tokenId); require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer"); } /** * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist */ function _ownerOf(uint256 tokenId) internal view virtual returns (address) { return _owners[tokenId]; } /** * @dev Returns whether `tokenId` exists. * * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}. * * Tokens start existing when they are minted (`_mint`), * and stop existing when they are burned (`_burn`). */ function _exists(uint256 tokenId) internal view virtual returns (bool) { return _ownerOf(tokenId) != address(0); } /** * @dev Returns whether `spender` is allowed to manage `tokenId`. * * Requirements: * * - `tokenId` must exist. */ function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) { address owner = ERC721.ownerOf(tokenId); return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender); } /** * @dev Safely mints `tokenId` and transfers it to `to`. * * Requirements: * * - `tokenId` must not exist. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function _safeMint(address to, uint256 tokenId) internal virtual { _safeMint(to, tokenId, ""); } /** * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is * forwarded in {IERC721Receiver-onERC721Received} to contract recipients. */ function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual { _mint(to, tokenId); require( _checkOnERC721Received(address(0), to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer" ); } /** * @dev Mints `tokenId` and transfers it to `to`. * * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible * * Requirements: * * - `tokenId` must not exist. * - `to` cannot be the zero address. * * Emits a {Transfer} event. */ function _mint(address to, uint256 tokenId) internal virtual { require(to != address(0), "ERC721: mint to the zero address"); require(!_exists(tokenId), "ERC721: token already minted"); _beforeTokenTransfer(address(0), to, tokenId, 1); // Check that tokenId was not minted by `_beforeTokenTransfer` hook require(!_exists(tokenId), "ERC721: token already minted"); unchecked { // Will not overflow unless all 2**256 token ids are minted to the same owner. // Given that tokens are minted one by one, it is impossible in practice that // this ever happens. Might change if we allow batch minting. // The ERC fails to describe this case. _balances[to] += 1; } _owners[tokenId] = to; emit Transfer(address(0), to, tokenId); _afterTokenTransfer(address(0), to, tokenId, 1); } /** * @dev Destroys `tokenId`. * The approval is cleared when the token is burned. * This is an internal function that does not check if the sender is authorized to operate on the token. * * Requirements: * * - `tokenId` must exist. * * Emits a {Transfer} event. */ function _burn(uint256 tokenId) internal virtual { address owner = ERC721.ownerOf(tokenId); _beforeTokenTransfer(owner, address(0), tokenId, 1); // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook owner = ERC721.ownerOf(tokenId); // Clear approvals delete _tokenApprovals[tokenId]; unchecked { // Cannot overflow, as that would require more tokens to be burned/transferred // out than the owner initially received through minting and transferring in. _balances[owner] -= 1; } delete _owners[tokenId]; emit Transfer(owner, address(0), tokenId); _afterTokenTransfer(owner, address(0), tokenId, 1); } /** * @dev Transfers `tokenId` from `from` to `to`. * As opposed to {transferFrom}, this imposes no restrictions on msg.sender. * * Requirements: * * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * * Emits a {Transfer} event. */ function _transfer(address from, address to, uint256 tokenId) internal virtual { require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner"); require(to != address(0), "ERC721: transfer to the zero address"); _beforeTokenTransfer(from, to, tokenId, 1); // Check that tokenId was not transferred by `_beforeTokenTransfer` hook require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner"); // Clear approvals from the previous owner delete _tokenApprovals[tokenId]; unchecked { // `_balances[from]` cannot overflow for the same reason as described in `_burn`: // `from`'s balance is the number of token held, which is at least one before the current // transfer. // `_balances[to]` could overflow in the conditions described in `_mint`. That would require // all 2**256 token ids to be minted, which in practice is impossible. _balances[from] -= 1; _balances[to] += 1; } _owners[tokenId] = to; emit Transfer(from, to, tokenId); _afterTokenTransfer(from, to, tokenId, 1); } /** * @dev Approve `to` to operate on `tokenId` * * Emits an {Approval} event. */ function _approve(address to, uint256 tokenId) internal virtual { _tokenApprovals[tokenId] = to; emit Approval(ERC721.ownerOf(tokenId), to, tokenId); } /** * @dev Approve `operator` to operate on all of `owner` tokens * * Emits an {ApprovalForAll} event. */ function _setApprovalForAll(address owner, address operator, bool approved) internal virtual { require(owner != operator, "ERC721: approve to caller"); _operatorApprovals[owner][operator] = approved; emit ApprovalForAll(owner, operator, approved); } /** * @dev Reverts if the `tokenId` has not been minted yet. */ function _requireMinted(uint256 tokenId) internal view virtual { require(_exists(tokenId), "ERC721: invalid token ID"); } /** * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address. * The call is not executed if the target address is not a contract. * * @param from address representing the previous owner of the given token ID * @param to target address that will receive the tokens * @param tokenId uint256 ID of the token to be transferred * @param data bytes optional data to send along with the call * @return bool whether the call correctly returned the expected magic value */ function _checkOnERC721Received( address from, address to, uint256 tokenId, bytes memory data ) private returns (bool) { if (to.isContract()) { try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) { return retval == IERC721Receiver.onERC721Received.selector; } catch (bytes memory reason) { if (reason.length == 0) { revert("ERC721: transfer to non ERC721Receiver implementer"); } else { /// @solidity memory-safe-assembly assembly { revert(add(32, reason), mload(reason)) } } } } else { return true; } } /** * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1. * * Calling conditions: * * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`. * - When `from` is zero, the tokens will be minted for `to`. * - When `to` is zero, ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * - `batchSize` is non-zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {} /** * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1. * * Calling conditions: * * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`. * - When `from` is zero, the tokens were minted for `to`. * - When `to` is zero, ``from``'s tokens were burned. * - `from` and `to` are never both zero. * - `batchSize` is non-zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {} /** * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override. * * WARNING: Anyone calling this MUST ensure that the balances remain consistent with the ownership. The invariant * being that for any address `a` the value returned by `balanceOf(a)` must be equal to the number of tokens such * that `ownerOf(tokenId)` is `a`. */ // solhint-disable-next-line func-name-mixedcase function __unsafe_increaseBalance(address account, uint256 amount) internal { _balances[account] += amount; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol) pragma solidity ^0.8.0; import "../IERC721.sol"; /** * @title ERC-721 Non-Fungible Token Standard, optional metadata extension * @dev See https://eips.ethereum.org/EIPS/eip-721 */ interface IERC721Metadata is IERC721 { /** * @dev Returns the token collection name. */ function name() external view returns (string memory); /** * @dev Returns the token collection symbol. */ function symbol() external view returns (string memory); /** * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token. */ function tokenURI(uint256 tokenId) external view returns (string memory); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol) pragma solidity ^0.8.0; import "../../utils/introspection/IERC165.sol"; /** * @dev Required interface of an ERC721 compliant contract. */ interface IERC721 is IERC165 { /** * @dev Emitted when `tokenId` token is transferred from `from` to `to`. */ event Transfer(address indexed from, address indexed to, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token. */ event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets. */ event ApprovalForAll(address indexed owner, address indexed operator, bool approved); /** * @dev Returns the number of tokens in ``owner``'s account. */ function balanceOf(address owner) external view returns (uint256 balance); /** * @dev Returns the owner of the `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function ownerOf(uint256 tokenId) external view returns (address owner); /** * @dev Safely transfers `tokenId` token from `from` to `to`. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external; /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients * are aware of the ERC721 protocol to prevent tokens from being forever locked. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom(address from, address to, uint256 tokenId) external; /** * @dev Transfers `tokenId` token from `from` to `to`. * * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721 * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must * understand this adds an external call which potentially creates a reentrancy vulnerability. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 tokenId) external; /** * @dev Gives permission to `to` to transfer `tokenId` token to another account. * The approval is cleared when the token is transferred. * * Only a single account can be approved at a time, so approving the zero address clears previous approvals. * * Requirements: * * - The caller must own the token or be an approved operator. * - `tokenId` must exist. * * Emits an {Approval} event. */ function approve(address to, uint256 tokenId) external; /** * @dev Approve or remove `operator` as an operator for the caller. * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller. * * Requirements: * * - The `operator` cannot be the caller. * * Emits an {ApprovalForAll} event. */ function setApprovalForAll(address operator, bool approved) external; /** * @dev Returns the account approved for `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function getApproved(uint256 tokenId) external view returns (address operator); /** * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`. * * See {setApprovalForAll} */ function isApprovedForAll(address owner, address operator) external view returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol) pragma solidity ^0.8.0; /** * @title ERC721 token receiver interface * @dev Interface for any contract that wants to support safeTransfers * from ERC721 asset contracts. */ interface IERC721Receiver { /** * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom} * by `operator` from `from`, this function is called. * * It must return its Solidity selector to confirm the token transfer. * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted. * * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`. */ function onERC721Received( address operator, address from, uint256 tokenId, bytes calldata data ) external returns (bytes4); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * * Furthermore, `isContract` will also return true if the target contract within * the same transaction is already scheduled for destruction by `SELFDESTRUCT`, * which only has an effect at the end of a transaction. * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } function _contextSuffixLength() internal view virtual returns (uint256) { return 0; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol) pragma solidity ^0.8.0; import "../Strings.sol"; /** * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations. * * These functions can be used to verify that a message was signed by the holder * of the private keys of a given address. */ library ECDSA { enum RecoverError { NoError, InvalidSignature, InvalidSignatureLength, InvalidSignatureS, InvalidSignatureV // Deprecated in v4.8 } function _throwError(RecoverError error) private pure { if (error == RecoverError.NoError) { return; // no error: do nothing } else if (error == RecoverError.InvalidSignature) { revert("ECDSA: invalid signature"); } else if (error == RecoverError.InvalidSignatureLength) { revert("ECDSA: invalid signature length"); } else if (error == RecoverError.InvalidSignatureS) { revert("ECDSA: invalid signature 's' value"); } } /** * @dev Returns the address that signed a hashed message (`hash`) with * `signature` or error string. This address can then be used for verification purposes. * * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures: * this function rejects them by requiring the `s` value to be in the lower * half order, and the `v` value to be either 27 or 28. * * IMPORTANT: `hash` _must_ be the result of a hash operation for the * verification to be secure: it is possible to craft signatures that * recover to arbitrary addresses for non-hashed data. A safe way to ensure * this is by receiving a hash of the original message (which may otherwise * be too long), and then calling {toEthSignedMessageHash} on it. * * Documentation for signature generation: * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js] * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers] * * _Available since v4.3._ */ function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) { if (signature.length == 65) { bytes32 r; bytes32 s; uint8 v; // ecrecover takes the signature parameters, and the only way to get them // currently is to use assembly. /// @solidity memory-safe-assembly assembly { r := mload(add(signature, 0x20)) s := mload(add(signature, 0x40)) v := byte(0, mload(add(signature, 0x60))) } return tryRecover(hash, v, r, s); } else { return (address(0), RecoverError.InvalidSignatureLength); } } /** * @dev Returns the address that signed a hashed message (`hash`) with * `signature`. This address can then be used for verification purposes. * * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures: * this function rejects them by requiring the `s` value to be in the lower * half order, and the `v` value to be either 27 or 28. * * IMPORTANT: `hash` _must_ be the result of a hash operation for the * verification to be secure: it is possible to craft signatures that * recover to arbitrary addresses for non-hashed data. A safe way to ensure * this is by receiving a hash of the original message (which may otherwise * be too long), and then calling {toEthSignedMessageHash} on it. */ function recover(bytes32 hash, bytes memory signature) internal pure returns (address) { (address recovered, RecoverError error) = tryRecover(hash, signature); _throwError(error); return recovered; } /** * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately. * * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures] * * _Available since v4.3._ */ function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) { bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff); uint8 v = uint8((uint256(vs) >> 255) + 27); return tryRecover(hash, v, r, s); } /** * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately. * * _Available since v4.2._ */ function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) { (address recovered, RecoverError error) = tryRecover(hash, r, vs); _throwError(error); return recovered; } /** * @dev Overload of {ECDSA-tryRecover} that receives the `v`, * `r` and `s` signature fields separately. * * _Available since v4.3._ */ function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) { // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most // signatures from current libraries generate a unique signature with an s-value in the lower half order. // // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept // these malleable signatures as well. if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) { return (address(0), RecoverError.InvalidSignatureS); } // If the signature is valid (and not malleable), return the signer address address signer = ecrecover(hash, v, r, s); if (signer == address(0)) { return (address(0), RecoverError.InvalidSignature); } return (signer, RecoverError.NoError); } /** * @dev Overload of {ECDSA-recover} that receives the `v`, * `r` and `s` signature fields separately. */ function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) { (address recovered, RecoverError error) = tryRecover(hash, v, r, s); _throwError(error); return recovered; } /** * @dev Returns an Ethereum Signed Message, created from a `hash`. This * produces hash corresponding to the one signed with the * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] * JSON-RPC method as part of EIP-191. * * See {recover}. */ function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) { // 32 is the length in bytes of hash, // enforced by the type signature above /// @solidity memory-safe-assembly assembly { mstore(0x00, "\x19Ethereum Signed Message:\n32") mstore(0x1c, hash) message := keccak256(0x00, 0x3c) } } /** * @dev Returns an Ethereum Signed Message, created from `s`. This * produces hash corresponding to the one signed with the * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] * JSON-RPC method as part of EIP-191. * * See {recover}. */ function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) { return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s)); } /** * @dev Returns an Ethereum Signed Typed Data, created from a * `domainSeparator` and a `structHash`. This produces hash corresponding * to the one signed with the * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] * JSON-RPC method as part of EIP-712. * * See {recover}. */ function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) { /// @solidity memory-safe-assembly assembly { let ptr := mload(0x40) mstore(ptr, "\x19\x01") mstore(add(ptr, 0x02), domainSeparator) mstore(add(ptr, 0x22), structHash) data := keccak256(ptr, 0x42) } } /** * @dev Returns an Ethereum Signed Data with intended validator, created from a * `validator` and `data` according to the version 0 of EIP-191. * * See {recover}. */ function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) { return keccak256(abi.encodePacked("\x19\x00", validator, data)); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol) pragma solidity ^0.8.0; import "./IERC165.sol"; /** * @dev Implementation of the {IERC165} interface. * * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check * for the additional interface id that will be supported. For example: * * ```solidity * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId); * } * ``` * * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation. */ abstract contract ERC165 is IERC165 { /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { return interfaceId == type(IERC165).interfaceId; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC165 standard, as defined in the * https://eips.ethereum.org/EIPS/eip-165[EIP]. * * Implementers can declare support of contract interfaces, which can then be * queried by others ({ERC165Checker}). * * For an implementation, see {ERC165}. */ interface IERC165 { /** * @dev Returns true if this contract implements the interface defined by * `interfaceId`. See the corresponding * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section] * to learn more about how these ids are created. * * This function call must use less than 30 000 gas. */ function supportsInterface(bytes4 interfaceId) external view returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol) pragma solidity ^0.8.0; /** * @dev Standard math utilities missing in the Solidity language. */ library Math { enum Rounding { Down, // Toward negative infinity Up, // Toward infinity Zero // Toward zero } /** * @dev Returns the largest of two numbers. */ function max(uint256 a, uint256 b) internal pure returns (uint256) { return a > b ? a : b; } /** * @dev Returns the smallest of two numbers. */ function min(uint256 a, uint256 b) internal pure returns (uint256) { return a < b ? a : b; } /** * @dev Returns the average of two numbers. The result is rounded towards * zero. */ function average(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b) / 2 can overflow. return (a & b) + (a ^ b) / 2; } /** * @dev Returns the ceiling of the division of two numbers. * * This differs from standard division with `/` in that it rounds up instead * of rounding down. */ function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b - 1) / b can overflow on addition, so we distribute. return a == 0 ? 0 : (a - 1) / b + 1; } /** * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0 * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) * with further edits by Uniswap Labs also under MIT license. */ function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) { unchecked { // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256 // variables such that product = prod1 * 2^256 + prod0. uint256 prod0; // Least significant 256 bits of the product uint256 prod1; // Most significant 256 bits of the product assembly { let mm := mulmod(x, y, not(0)) prod0 := mul(x, y) prod1 := sub(sub(mm, prod0), lt(mm, prod0)) } // Handle non-overflow cases, 256 by 256 division. if (prod1 == 0) { // Solidity will revert if denominator == 0, unlike the div opcode on its own. // The surrounding unchecked block does not change this fact. // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic. return prod0 / denominator; } // Make sure the result is less than 2^256. Also prevents denominator == 0. require(denominator > prod1, "Math: mulDiv overflow"); /////////////////////////////////////////////// // 512 by 256 division. /////////////////////////////////////////////// // Make division exact by subtracting the remainder from [prod1 prod0]. uint256 remainder; assembly { // Compute remainder using mulmod. remainder := mulmod(x, y, denominator) // Subtract 256 bit number from 512 bit number. prod1 := sub(prod1, gt(remainder, prod0)) prod0 := sub(prod0, remainder) } // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1. // See https://cs.stackexchange.com/q/138556/92363. // Does not overflow because the denominator cannot be zero at this stage in the function. uint256 twos = denominator & (~denominator + 1); assembly { // Divide denominator by twos. denominator := div(denominator, twos) // Divide [prod1 prod0] by twos. prod0 := div(prod0, twos) // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one. twos := add(div(sub(0, twos), twos), 1) } // Shift in bits from prod1 into prod0. prod0 |= prod1 * twos; // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for // four bits. That is, denominator * inv = 1 mod 2^4. uint256 inverse = (3 * denominator) ^ 2; // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works // in modular arithmetic, doubling the correct bits in each step. inverse *= 2 - denominator * inverse; // inverse mod 2^8 inverse *= 2 - denominator * inverse; // inverse mod 2^16 inverse *= 2 - denominator * inverse; // inverse mod 2^32 inverse *= 2 - denominator * inverse; // inverse mod 2^64 inverse *= 2 - denominator * inverse; // inverse mod 2^128 inverse *= 2 - denominator * inverse; // inverse mod 2^256 // Because the division is now exact we can divide by multiplying with the modular inverse of denominator. // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1 // is no longer required. result = prod0 * inverse; return result; } } /** * @notice Calculates x * y / denominator with full precision, following the selected rounding direction. */ function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) { uint256 result = mulDiv(x, y, denominator); if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) { result += 1; } return result; } /** * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down. * * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11). */ function sqrt(uint256 a) internal pure returns (uint256) { if (a == 0) { return 0; } // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target. // // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`. // // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)` // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))` // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)` // // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit. uint256 result = 1 << (log2(a) >> 1); // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128, // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision // into the expected uint128 result. unchecked { result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; return min(result, a / result); } } /** * @notice Calculates sqrt(a), following the selected rounding direction. */ function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = sqrt(a); return result + (rounding == Rounding.Up && result * result < a ? 1 : 0); } } /** * @dev Return the log in base 2, rounded down, of a positive value. * Returns 0 if given 0. */ function log2(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 128; } if (value >> 64 > 0) { value >>= 64; result += 64; } if (value >> 32 > 0) { value >>= 32; result += 32; } if (value >> 16 > 0) { value >>= 16; result += 16; } if (value >> 8 > 0) { value >>= 8; result += 8; } if (value >> 4 > 0) { value >>= 4; result += 4; } if (value >> 2 > 0) { value >>= 2; result += 2; } if (value >> 1 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 2, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log2(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log2(value); return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0); } } /** * @dev Return the log in base 10, rounded down, of a positive value. * Returns 0 if given 0. */ function log10(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >= 10 ** 64) { value /= 10 ** 64; result += 64; } if (value >= 10 ** 32) { value /= 10 ** 32; result += 32; } if (value >= 10 ** 16) { value /= 10 ** 16; result += 16; } if (value >= 10 ** 8) { value /= 10 ** 8; result += 8; } if (value >= 10 ** 4) { value /= 10 ** 4; result += 4; } if (value >= 10 ** 2) { value /= 10 ** 2; result += 2; } if (value >= 10 ** 1) { result += 1; } } return result; } /** * @dev Return the log in base 10, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log10(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log10(value); return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0); } } /** * @dev Return the log in base 256, rounded down, of a positive value. * Returns 0 if given 0. * * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string. */ function log256(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 16; } if (value >> 64 > 0) { value >>= 64; result += 8; } if (value >> 32 > 0) { value >>= 32; result += 4; } if (value >> 16 > 0) { value >>= 16; result += 2; } if (value >> 8 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 256, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log256(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log256(value); return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol) pragma solidity ^0.8.0; /** * @dev Standard signed math utilities missing in the Solidity language. */ library SignedMath { /** * @dev Returns the largest of two signed numbers. */ function max(int256 a, int256 b) internal pure returns (int256) { return a > b ? a : b; } /** * @dev Returns the smallest of two signed numbers. */ function min(int256 a, int256 b) internal pure returns (int256) { return a < b ? a : b; } /** * @dev Returns the average of two signed numbers without overflow. * The result is rounded towards zero. */ function average(int256 a, int256 b) internal pure returns (int256) { // Formula from the book "Hacker's Delight" int256 x = (a & b) + ((a ^ b) >> 1); return x + (int256(uint256(x) >> 255) & (a ^ b)); } /** * @dev Returns the absolute unsigned value of a signed value. */ function abs(int256 n) internal pure returns (uint256) { unchecked { // must be unchecked in order to support `n = type(int256).min` return uint256(n >= 0 ? n : -n); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol) pragma solidity ^0.8.0; import "./math/Math.sol"; import "./math/SignedMath.sol"; /** * @dev String operations. */ library Strings { bytes16 private constant _SYMBOLS = "0123456789abcdef"; uint8 private constant _ADDRESS_LENGTH = 20; /** * @dev Converts a `uint256` to its ASCII `string` decimal representation. */ function toString(uint256 value) internal pure returns (string memory) { unchecked { uint256 length = Math.log10(value) + 1; string memory buffer = new string(length); uint256 ptr; /// @solidity memory-safe-assembly assembly { ptr := add(buffer, add(32, length)) } while (true) { ptr--; /// @solidity memory-safe-assembly assembly { mstore8(ptr, byte(mod(value, 10), _SYMBOLS)) } value /= 10; if (value == 0) break; } return buffer; } } /** * @dev Converts a `int256` to its ASCII `string` decimal representation. */ function toString(int256 value) internal pure returns (string memory) { return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value)))); } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation. */ function toHexString(uint256 value) internal pure returns (string memory) { unchecked { return toHexString(value, Math.log256(value) + 1); } } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length. */ function toHexString(uint256 value, uint256 length) internal pure returns (string memory) { bytes memory buffer = new bytes(2 * length + 2); buffer[0] = "0"; buffer[1] = "x"; for (uint256 i = 2 * length + 1; i > 1; --i) { buffer[i] = _SYMBOLS[value & 0xf]; value >>= 4; } require(value == 0, "Strings: hex length insufficient"); return string(buffer); } /** * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation. */ function toHexString(address addr) internal pure returns (string memory) { return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH); } /** * @dev Returns true if the two strings are equal. */ function equal(string memory a, string memory b) internal pure returns (bool) { return keccak256(bytes(a)) == keccak256(bytes(b)); } }
// SPDX-License-Identifier: MIT pragma solidity 0.8.28; abstract contract Versioning { // The version of the contract string public version; constructor() {} // Set the version of the contract function _setVersion(string memory _version) internal { version = _version; } }
// SPDX-License-Identifier: MIT pragma solidity 0.8.28; import "@openzeppelin/contracts/security/ReentrancyGuard.sol"; import "@openzeppelin/contracts/token/ERC20/IERC20.sol"; import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol"; abstract contract Withdrawable is ReentrancyGuard { using SafeERC20 for IERC20; event EtherWithdrawn(address indexed to, uint256 amount); event ERC20Withdrawn( address indexed token, address indexed to, uint256 amount ); /// @notice Allows the withdrawal of Ether from the contract. /// @dev This function should be called by an access-controlled function in the inheriting contract. /// @param to The address to send the Ether to. /// @param amount The amount of Ether to withdraw. /// @return success Whether the withdrawal was successful. function _withdraw( address to, uint256 amount ) internal nonReentrant returns (bool success) { require( to != address(0), "Withdrawable: cannot withdraw to zero address" ); require(amount > 0, "Withdrawable: cannot withdraw zero amount"); require( amount <= address(this).balance, "Withdrawable: insufficient balance" ); (success, ) = payable(to).call{value: amount}(""); require(success, "Withdrawable: transfer failed"); emit EtherWithdrawn(to, amount); } /// @notice Allows the withdrawal of ERC20 tokens from the contract. /// @dev This function should be called by an access-controlled function in the inheriting contract. /// @param tokenAddress The address of the ERC20 token to withdraw. /// @param to The address to send the tokens to. /// @param amount The amount of tokens to withdraw. function _withdrawERC20( address tokenAddress, address to, uint256 amount ) internal nonReentrant { require( tokenAddress != address(0), "Withdrawable: token address cannot be zero" ); require( to != address(0), "Withdrawable: cannot withdraw to zero address" ); require(amount > 0, "Withdrawable: cannot withdraw zero amount"); IERC20 token = IERC20(tokenAddress); uint256 balance = token.balanceOf(address(this)); require(amount <= balance, "Withdrawable: insufficient token balance"); token.safeTransfer(to, amount); emit ERC20Withdrawn(tokenAddress, to, amount); } }
{ "optimizer": { "enabled": true, "runs": 20000 }, "evmVersion": "paris", "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {} }
[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"CreatorTokenBase__InvalidTransferValidatorContract","type":"error"},{"inputs":[],"name":"CreatorTokenBase__SetTransferValidatorFirst","type":"error"},{"inputs":[],"name":"ERC721OpenZeppelinInitializable__AlreadyInitializedERC721","type":"error"},{"inputs":[],"name":"InitializableOwnable__OwnerAlreadyInitialized","type":"error"},{"inputs":[],"name":"ShouldNotMintToBurnAddress","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"DefaultRoyaltySet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ERC20Withdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EtherWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"TokenRoyaltySet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldValidator","type":"address"},{"indexed":false,"internalType":"address","name":"newValidator","type":"address"}],"name":"TransferValidatorUpdated","type":"event"},{"inputs":[],"name":"DEFAULT_OPERATOR_WHITELIST_ID","outputs":[{"internalType":"uint120","name":"","type":"uint120"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_TRANSFER_SECURITY_LEVEL","outputs":[{"internalType":"enum TransferSecurityLevels","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_TRANSFER_VALIDATOR","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"firstTokenId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes32","name":"_phaseID","type":"bytes32"},{"internalType":"uint256","name":"_price","type":"uint256"},{"internalType":"uint256","name":"_maxPerTx","type":"uint256"},{"internalType":"uint256","name":"_maxPerUser","type":"uint256"},{"internalType":"uint256","name":"_maxPerPhase","type":"uint256"},{"internalType":"bytes32","name":"_nonce","type":"bytes32"}],"name":"getMessageHash","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"getPermittedContractReceivers","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getSecurityPolicy","outputs":[{"components":[{"internalType":"enum TransferSecurityLevels","name":"transferSecurityLevel","type":"uint8"},{"internalType":"uint120","name":"operatorWhitelistId","type":"uint120"},{"internalType":"uint120","name":"permittedContractReceiversId","type":"uint120"}],"internalType":"struct CollectionSecurityPolicy","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTransferValidator","outputs":[{"internalType":"contract ICreatorTokenTransferValidator","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getWhitelistedOperators","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"string","name":"_baseUri","type":"string"},{"internalType":"uint256","name":"_supply","type":"uint256"},{"internalType":"uint256","name":"_firstTokenId","type":"uint256"},{"internalType":"address","name":"_signer","type":"address"},{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_royaltyReceiver","type":"address"},{"internalType":"uint96","name":"_royaltyFeeNumerator","type":"uint96"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"}],"name":"initializeERC721","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner_","type":"address"}],"name":"initializeOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"isContractReceiverPermitted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"isOperatorWhitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"isTransferAllowed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_nonce","type":"bytes32"}],"name":"isValidNonce","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes32","name":"_phaseID","type":"bytes32"},{"internalType":"uint256","name":"_price","type":"uint256"},{"internalType":"uint256","name":"_maxPerTx","type":"uint256"},{"internalType":"uint256","name":"_maxPerUser","type":"uint256"},{"internalType":"uint256","name":"_maxPerPhase","type":"uint256"},{"internalType":"bytes32","name":"_nonce","type":"bytes32"},{"internalType":"bytes","name":"_signature","type":"bytes"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"minted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_user","type":"address"},{"internalType":"bytes32","name":"_phaseID","type":"bytes32"}],"name":"mintedByUser","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_phaseID","type":"bytes32"}],"name":"mintedTotal","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"name":"nonces","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"name":"phasesStats","outputs":[{"internalType":"uint256","name":"mintedTotal","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_baseUri","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"setDefaultRoyalty","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_signer","type":"address"}],"name":"setSigner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"enum TransferSecurityLevels","name":"level","type":"uint8"},{"internalType":"uint120","name":"operatorWhitelistId","type":"uint120"},{"internalType":"uint120","name":"permittedContractReceiversAllowlistId","type":"uint120"}],"name":"setToCustomSecurityPolicy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"validator","type":"address"},{"internalType":"enum TransferSecurityLevels","name":"level","type":"uint8"},{"internalType":"uint120","name":"operatorWhitelistId","type":"uint120"},{"internalType":"uint120","name":"permittedContractReceiversAllowlistId","type":"uint120"}],"name":"setToCustomValidatorAndSecurityPolicy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"setToDefaultSecurityPolicy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"setTokenRoyalty","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"transferValidator_","type":"address"}],"name":"setTransferValidator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"signer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"supply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawERC20","outputs":[],"stateMutability":"nonpayable","type":"function"}]
[ Download: CSV Export ]
[ Download: CSV Export ]
A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.