Contract Source Code:
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.6.11;
import {Router} from "./Router.sol";
import {StandardHookMetadata} from "../hooks/libs/StandardHookMetadata.sol";
abstract contract GasRouter is Router {
// ============ Mutable Storage ============
mapping(uint32 => uint256) public destinationGas;
struct GasRouterConfig {
uint32 domain;
uint256 gas;
}
constructor(address _mailbox) Router(_mailbox) {}
/**
* @notice Sets the gas amount dispatched for each configured domain.
* @param gasConfigs The array of GasRouterConfig structs
*/
function setDestinationGas(
GasRouterConfig[] calldata gasConfigs
) external onlyOwner {
for (uint256 i = 0; i < gasConfigs.length; i += 1) {
_setDestinationGas(gasConfigs[i].domain, gasConfigs[i].gas);
}
}
/**
* @notice Sets the gas amount dispatched for each configured domain.
* @param domain The destination domain ID
* @param gas The gas limit
*/
function setDestinationGas(uint32 domain, uint256 gas) external onlyOwner {
_setDestinationGas(domain, gas);
}
/**
* @notice Returns the gas payment required to dispatch a message to the given domain's router.
* @param _destinationDomain The domain of the router.
* @return _gasPayment Payment computed by the registered InterchainGasPaymaster.
*/
function quoteGasPayment(
uint32 _destinationDomain
) external view returns (uint256) {
return _GasRouter_quoteDispatch(_destinationDomain, "", address(hook));
}
function _GasRouter_hookMetadata(
uint32 _destination
) internal view returns (bytes memory) {
return
StandardHookMetadata.overrideGasLimit(destinationGas[_destination]);
}
function _setDestinationGas(uint32 domain, uint256 gas) internal {
destinationGas[domain] = gas;
}
function _GasRouter_dispatch(
uint32 _destination,
uint256 _value,
bytes memory _messageBody,
address _hook
) internal returns (bytes32) {
return
_Router_dispatch(
_destination,
_value,
_messageBody,
_GasRouter_hookMetadata(_destination),
_hook
);
}
function _GasRouter_quoteDispatch(
uint32 _destination,
bytes memory _messageBody,
address _hook
) internal view returns (uint256) {
return
_Router_quoteDispatch(
_destination,
_messageBody,
_GasRouter_hookMetadata(_destination),
_hook
);
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.6.11;
// ============ Internal Imports ============
import {IMailbox} from "../interfaces/IMailbox.sol";
import {IPostDispatchHook} from "../interfaces/hooks/IPostDispatchHook.sol";
import {IInterchainSecurityModule} from "../interfaces/IInterchainSecurityModule.sol";
import {Message} from "../libs/Message.sol";
// ============ External Imports ============
import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
abstract contract MailboxClient is OwnableUpgradeable {
using Message for bytes;
IMailbox public immutable mailbox;
uint32 public immutable localDomain;
IPostDispatchHook public hook;
IInterchainSecurityModule public interchainSecurityModule;
uint256[48] private __GAP; // gap for upgrade safety
// ============ Modifiers ============
modifier onlyContract(address _contract) {
require(
Address.isContract(_contract),
"MailboxClient: invalid mailbox"
);
_;
}
modifier onlyContractOrNull(address _contract) {
require(
Address.isContract(_contract) || _contract == address(0),
"MailboxClient: invalid contract setting"
);
_;
}
/**
* @notice Only accept messages from an Hyperlane Mailbox contract
*/
modifier onlyMailbox() {
require(
msg.sender == address(mailbox),
"MailboxClient: sender not mailbox"
);
_;
}
constructor(address _mailbox) onlyContract(_mailbox) {
mailbox = IMailbox(_mailbox);
localDomain = mailbox.localDomain();
_transferOwnership(msg.sender);
}
/**
* @notice Sets the address of the application's custom hook.
* @param _hook The address of the hook contract.
*/
function setHook(address _hook) public onlyContractOrNull(_hook) onlyOwner {
hook = IPostDispatchHook(_hook);
}
/**
* @notice Sets the address of the application's custom interchain security module.
* @param _module The address of the interchain security module contract.
*/
function setInterchainSecurityModule(
address _module
) public onlyContractOrNull(_module) onlyOwner {
interchainSecurityModule = IInterchainSecurityModule(_module);
}
// ======== Initializer =========
function _MailboxClient_initialize(
address _hook,
address _interchainSecurityModule,
address _owner
) internal onlyInitializing {
__Ownable_init();
setHook(_hook);
setInterchainSecurityModule(_interchainSecurityModule);
_transferOwnership(_owner);
}
function _isLatestDispatched(bytes32 id) internal view returns (bool) {
return mailbox.latestDispatchedId() == id;
}
function _isDelivered(bytes32 id) internal view returns (bool) {
return mailbox.delivered(id);
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.6.11;
// ============ Internal Imports ============
import {IMessageRecipient} from "../interfaces/IMessageRecipient.sol";
import {IPostDispatchHook} from "../interfaces/hooks/IPostDispatchHook.sol";
import {IInterchainSecurityModule} from "../interfaces/IInterchainSecurityModule.sol";
import {MailboxClient} from "./MailboxClient.sol";
import {EnumerableMapExtended} from "../libs/EnumerableMapExtended.sol";
// ============ External Imports ============
import {Strings} from "@openzeppelin/contracts/utils/Strings.sol";
abstract contract Router is MailboxClient, IMessageRecipient {
using EnumerableMapExtended for EnumerableMapExtended.UintToBytes32Map;
using Strings for uint32;
// ============ Mutable Storage ============
EnumerableMapExtended.UintToBytes32Map internal _routers;
uint256[48] private __GAP; // gap for upgrade safety
constructor(address _mailbox) MailboxClient(_mailbox) {}
// ============ External functions ============
function domains() external view returns (uint32[] memory) {
return _routers.uint32Keys();
}
/**
* @notice Returns the address of the Router contract for the given domain
* @param _domain The remote domain ID.
* @dev Returns 0 address if no router is enrolled for the given domain
* @return router The address of the Router contract for the given domain
*/
function routers(uint32 _domain) public view virtual returns (bytes32) {
(, bytes32 _router) = _routers.tryGet(_domain);
return _router;
}
/**
* @notice Unregister the domain
* @param _domain The domain of the remote Application Router
*/
function unenrollRemoteRouter(uint32 _domain) external virtual onlyOwner {
_unenrollRemoteRouter(_domain);
}
/**
* @notice Register the address of a Router contract for the same Application on a remote chain
* @param _domain The domain of the remote Application Router
* @param _router The address of the remote Application Router
*/
function enrollRemoteRouter(
uint32 _domain,
bytes32 _router
) external virtual onlyOwner {
_enrollRemoteRouter(_domain, _router);
}
/**
* @notice Batch version of `enrollRemoteRouter`
* @param _domains The domains of the remote Application Routers
* @param _addresses The addresses of the remote Application Routers
*/
function enrollRemoteRouters(
uint32[] calldata _domains,
bytes32[] calldata _addresses
) external virtual onlyOwner {
require(_domains.length == _addresses.length, "!length");
uint256 length = _domains.length;
for (uint256 i = 0; i < length; i += 1) {
_enrollRemoteRouter(_domains[i], _addresses[i]);
}
}
/**
* @notice Batch version of `unenrollRemoteRouter`
* @param _domains The domains of the remote Application Routers
*/
function unenrollRemoteRouters(
uint32[] calldata _domains
) external virtual onlyOwner {
uint256 length = _domains.length;
for (uint256 i = 0; i < length; i += 1) {
_unenrollRemoteRouter(_domains[i]);
}
}
/**
* @notice Handles an incoming message
* @param _origin The origin domain
* @param _sender The sender address
* @param _message The message
*/
function handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) external payable virtual override onlyMailbox {
bytes32 _router = _mustHaveRemoteRouter(_origin);
require(_router == _sender, "Enrolled router does not match sender");
_handle(_origin, _sender, _message);
}
// ============ Virtual functions ============
function _handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) internal virtual;
// ============ Internal functions ============
/**
* @notice Set the router for a given domain
* @param _domain The domain
* @param _address The new router
*/
function _enrollRemoteRouter(
uint32 _domain,
bytes32 _address
) internal virtual {
_routers.set(_domain, _address);
}
/**
* @notice Remove the router for a given domain
* @param _domain The domain
*/
function _unenrollRemoteRouter(uint32 _domain) internal virtual {
require(_routers.remove(_domain), _domainNotFoundError(_domain));
}
/**
* @notice Return true if the given domain / router is the address of a remote Application Router
* @param _domain The domain of the potential remote Application Router
* @param _address The address of the potential remote Application Router
*/
function _isRemoteRouter(
uint32 _domain,
bytes32 _address
) internal view returns (bool) {
return routers(_domain) == _address;
}
/**
* @notice Assert that the given domain has a Application Router registered and return its address
* @param _domain The domain of the chain for which to get the Application Router
* @return _router The address of the remote Application Router on _domain
*/
function _mustHaveRemoteRouter(
uint32 _domain
) internal view returns (bytes32) {
(bool contained, bytes32 _router) = _routers.tryGet(_domain);
if (contained) {
return _router;
}
revert(_domainNotFoundError(_domain));
}
function _domainNotFoundError(
uint32 _domain
) internal pure returns (string memory) {
return
string.concat(
"No router enrolled for domain: ",
_domain.toString()
);
}
function _Router_dispatch(
uint32 _destinationDomain,
uint256 _value,
bytes memory _messageBody,
bytes memory _hookMetadata,
address _hook
) internal returns (bytes32) {
bytes32 _router = _mustHaveRemoteRouter(_destinationDomain);
return
mailbox.dispatch{value: _value}(
_destinationDomain,
_router,
_messageBody,
_hookMetadata,
IPostDispatchHook(_hook)
);
}
/**
* DEPRECATED: Use `_Router_dispatch` instead
* @dev For backward compatibility with v2 client contracts
*/
function _dispatch(
uint32 _destinationDomain,
bytes memory _messageBody
) internal returns (bytes32) {
return
_Router_dispatch(
_destinationDomain,
msg.value,
_messageBody,
"",
address(hook)
);
}
function _Router_quoteDispatch(
uint32 _destinationDomain,
bytes memory _messageBody,
bytes memory _hookMetadata,
address _hook
) internal view returns (uint256) {
bytes32 _router = _mustHaveRemoteRouter(_destinationDomain);
return
mailbox.quoteDispatch(
_destinationDomain,
_router,
_messageBody,
_hookMetadata,
IPostDispatchHook(_hook)
);
}
/**
* DEPRECATED: Use `_Router_quoteDispatch` instead
* @dev For backward compatibility with v2 client contracts
*/
function _quoteDispatch(
uint32 _destinationDomain,
bytes memory _messageBody
) internal view returns (uint256) {
return
_Router_quoteDispatch(
_destinationDomain,
_messageBody,
"",
address(hook)
);
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
/**
* Format of metadata:
*
* [0:2] variant
* [2:34] msg.value
* [34:66] Gas limit for message (IGP)
* [66:86] Refund address for message (IGP)
* [86:] Custom metadata
*/
library StandardHookMetadata {
struct Metadata {
uint16 variant;
uint256 msgValue;
uint256 gasLimit;
address refundAddress;
}
uint8 private constant VARIANT_OFFSET = 0;
uint8 private constant MSG_VALUE_OFFSET = 2;
uint8 private constant GAS_LIMIT_OFFSET = 34;
uint8 private constant REFUND_ADDRESS_OFFSET = 66;
uint256 private constant MIN_METADATA_LENGTH = 86;
uint16 public constant VARIANT = 1;
/**
* @notice Returns the variant of the metadata.
* @param _metadata ABI encoded standard hook metadata.
* @return variant of the metadata as uint8.
*/
function variant(bytes calldata _metadata) internal pure returns (uint16) {
if (_metadata.length < VARIANT_OFFSET + 2) return 0;
return uint16(bytes2(_metadata[VARIANT_OFFSET:VARIANT_OFFSET + 2]));
}
/**
* @notice Returns the specified value for the message.
* @param _metadata ABI encoded standard hook metadata.
* @param _default Default fallback value.
* @return Value for the message as uint256.
*/
function msgValue(
bytes calldata _metadata,
uint256 _default
) internal pure returns (uint256) {
if (_metadata.length < MSG_VALUE_OFFSET + 32) return _default;
return
uint256(bytes32(_metadata[MSG_VALUE_OFFSET:MSG_VALUE_OFFSET + 32]));
}
/**
* @notice Returns the specified gas limit for the message.
* @param _metadata ABI encoded standard hook metadata.
* @param _default Default fallback gas limit.
* @return Gas limit for the message as uint256.
*/
function gasLimit(
bytes calldata _metadata,
uint256 _default
) internal pure returns (uint256) {
if (_metadata.length < GAS_LIMIT_OFFSET + 32) return _default;
return
uint256(bytes32(_metadata[GAS_LIMIT_OFFSET:GAS_LIMIT_OFFSET + 32]));
}
/**
* @notice Returns the specified refund address for the message.
* @param _metadata ABI encoded standard hook metadata.
* @param _default Default fallback refund address.
* @return Refund address for the message as address.
*/
function refundAddress(
bytes calldata _metadata,
address _default
) internal pure returns (address) {
if (_metadata.length < REFUND_ADDRESS_OFFSET + 20) return _default;
return
address(
bytes20(
_metadata[REFUND_ADDRESS_OFFSET:REFUND_ADDRESS_OFFSET + 20]
)
);
}
/**
* @notice Returns any custom metadata.
* @param _metadata ABI encoded standard hook metadata.
* @return Custom metadata.
*/
function getCustomMetadata(
bytes calldata _metadata
) internal pure returns (bytes calldata) {
if (_metadata.length < MIN_METADATA_LENGTH) return _metadata[0:0];
return _metadata[MIN_METADATA_LENGTH:];
}
/**
* @notice Formats the specified gas limit and refund address into standard hook metadata.
* @param _msgValue msg.value for the message.
* @param _gasLimit Gas limit for the message.
* @param _refundAddress Refund address for the message.
* @param _customMetadata Additional metadata to include in the standard hook metadata.
* @return ABI encoded standard hook metadata.
*/
function formatMetadata(
uint256 _msgValue,
uint256 _gasLimit,
address _refundAddress,
bytes memory _customMetadata
) internal pure returns (bytes memory) {
return
abi.encodePacked(
VARIANT,
_msgValue,
_gasLimit,
_refundAddress,
_customMetadata
);
}
/**
* @notice Formats the specified gas limit and refund address into standard hook metadata.
* @param _msgValue msg.value for the message.
* @return ABI encoded standard hook metadata.
*/
function overrideMsgValue(
uint256 _msgValue
) internal view returns (bytes memory) {
return formatMetadata(_msgValue, uint256(0), msg.sender, "");
}
/**
* @notice Formats the specified gas limit and refund address into standard hook metadata.
* @param _gasLimit Gas limit for the message.
* @return ABI encoded standard hook metadata.
*/
function overrideGasLimit(
uint256 _gasLimit
) internal view returns (bytes memory) {
return formatMetadata(uint256(0), _gasLimit, msg.sender, "");
}
/**
* @notice Formats the specified refund address into standard hook metadata.
* @param _refundAddress Refund address for the message.
* @return ABI encoded standard hook metadata.
*/
function overrideRefundAddress(
address _refundAddress
) internal pure returns (bytes memory) {
return formatMetadata(uint256(0), uint256(0), _refundAddress, "");
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.6.11;
interface IInterchainSecurityModule {
enum Types {
UNUSED,
ROUTING,
AGGREGATION,
LEGACY_MULTISIG,
MERKLE_ROOT_MULTISIG,
MESSAGE_ID_MULTISIG,
NULL, // used with relayer carrying no metadata
CCIP_READ,
ARB_L2_TO_L1,
WEIGHTED_MERKLE_ROOT_MULTISIG,
WEIGHTED_MESSAGE_ID_MULTISIG,
OP_L2_TO_L1
}
/**
* @notice Returns an enum that represents the type of security model
* encoded by this ISM.
* @dev Relayers infer how to fetch and format metadata.
*/
function moduleType() external view returns (uint8);
/**
* @notice Defines a security model responsible for verifying interchain
* messages based on the provided metadata.
* @param _metadata Off-chain metadata provided by a relayer, specific to
* the security model encoded by the module (e.g. validator signatures)
* @param _message Hyperlane encoded interchain message
* @return True if the message was verified
*/
function verify(
bytes calldata _metadata,
bytes calldata _message
) external returns (bool);
}
interface ISpecifiesInterchainSecurityModule {
function interchainSecurityModule()
external
view
returns (IInterchainSecurityModule);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.8.0;
import {IInterchainSecurityModule} from "./IInterchainSecurityModule.sol";
import {IPostDispatchHook} from "./hooks/IPostDispatchHook.sol";
interface IMailbox {
// ============ Events ============
/**
* @notice Emitted when a new message is dispatched via Hyperlane
* @param sender The address that dispatched the message
* @param destination The destination domain of the message
* @param recipient The message recipient address on `destination`
* @param message Raw bytes of message
*/
event Dispatch(
address indexed sender,
uint32 indexed destination,
bytes32 indexed recipient,
bytes message
);
/**
* @notice Emitted when a new message is dispatched via Hyperlane
* @param messageId The unique message identifier
*/
event DispatchId(bytes32 indexed messageId);
/**
* @notice Emitted when a Hyperlane message is processed
* @param messageId The unique message identifier
*/
event ProcessId(bytes32 indexed messageId);
/**
* @notice Emitted when a Hyperlane message is delivered
* @param origin The origin domain of the message
* @param sender The message sender address on `origin`
* @param recipient The address that handled the message
*/
event Process(
uint32 indexed origin,
bytes32 indexed sender,
address indexed recipient
);
function localDomain() external view returns (uint32);
function delivered(bytes32 messageId) external view returns (bool);
function defaultIsm() external view returns (IInterchainSecurityModule);
function defaultHook() external view returns (IPostDispatchHook);
function requiredHook() external view returns (IPostDispatchHook);
function latestDispatchedId() external view returns (bytes32);
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody
) external payable returns (bytes32 messageId);
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody
) external view returns (uint256 fee);
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata body,
bytes calldata defaultHookMetadata
) external payable returns (bytes32 messageId);
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata defaultHookMetadata
) external view returns (uint256 fee);
function dispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata body,
bytes calldata customHookMetadata,
IPostDispatchHook customHook
) external payable returns (bytes32 messageId);
function quoteDispatch(
uint32 destinationDomain,
bytes32 recipientAddress,
bytes calldata messageBody,
bytes calldata customHookMetadata,
IPostDispatchHook customHook
) external view returns (uint256 fee);
function process(
bytes calldata metadata,
bytes calldata message
) external payable;
function recipientIsm(
address recipient
) external view returns (IInterchainSecurityModule module);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.6.11;
interface IMessageRecipient {
function handle(
uint32 _origin,
bytes32 _sender,
bytes calldata _message
) external payable;
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.8.0;
/*@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ HYPERLANE @@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@@
@@@@@@@@@ @@@@@@@@*/
interface IPostDispatchHook {
enum Types {
UNUSED,
ROUTING,
AGGREGATION,
MERKLE_TREE,
INTERCHAIN_GAS_PAYMASTER,
FALLBACK_ROUTING,
ID_AUTH_ISM,
PAUSABLE,
PROTOCOL_FEE,
LAYER_ZERO_V1,
RATE_LIMITED,
ARB_L2_TO_L1,
OP_L2_TO_L1
}
/**
* @notice Returns an enum that represents the type of hook
*/
function hookType() external view returns (uint8);
/**
* @notice Returns whether the hook supports metadata
* @param metadata metadata
* @return Whether the hook supports metadata
*/
function supportsMetadata(
bytes calldata metadata
) external view returns (bool);
/**
* @notice Post action after a message is dispatched via the Mailbox
* @param metadata The metadata required for the hook
* @param message The message passed from the Mailbox.dispatch() call
*/
function postDispatch(
bytes calldata metadata,
bytes calldata message
) external payable;
/**
* @notice Compute the payment required by the postDispatch call
* @param metadata The metadata required for the hook
* @param message The message passed from the Mailbox.dispatch() call
* @return Quoted payment for the postDispatch call
*/
function quoteDispatch(
bytes calldata metadata,
bytes calldata message
) external view returns (uint256);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.6.11;
// ============ External Imports ============
import "@openzeppelin/contracts/utils/structs/EnumerableMap.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
// extends EnumerableMap with uint256 => bytes32 type
// modelled after https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v4.8.0/contracts/utils/structs/EnumerableMap.sol
library EnumerableMapExtended {
using EnumerableMap for EnumerableMap.Bytes32ToBytes32Map;
using EnumerableSet for EnumerableSet.Bytes32Set;
struct UintToBytes32Map {
EnumerableMap.Bytes32ToBytes32Map _inner;
}
// ============ Library Functions ============
function keys(
UintToBytes32Map storage map
) internal view returns (uint256[] memory _keys) {
uint256 _length = map._inner.length();
_keys = new uint256[](_length);
for (uint256 i = 0; i < _length; i++) {
_keys[i] = uint256(map._inner._keys.at(i));
}
}
function uint32Keys(
UintToBytes32Map storage map
) internal view returns (uint32[] memory _keys) {
uint256[] memory uint256keys = keys(map);
_keys = new uint32[](uint256keys.length);
for (uint256 i = 0; i < uint256keys.length; i++) {
_keys[i] = uint32(uint256keys[i]);
}
}
function set(
UintToBytes32Map storage map,
uint256 key,
bytes32 value
) internal {
map._inner.set(bytes32(key), value);
}
function get(
UintToBytes32Map storage map,
uint256 key
) internal view returns (bytes32) {
return map._inner.get(bytes32(key));
}
function tryGet(
UintToBytes32Map storage map,
uint256 key
) internal view returns (bool, bytes32) {
return map._inner.tryGet(bytes32(key));
}
function remove(
UintToBytes32Map storage map,
uint256 key
) internal returns (bool) {
return map._inner.remove(bytes32(key));
}
function contains(
UintToBytes32Map storage map,
uint256 key
) internal view returns (bool) {
return map._inner.contains(bytes32(key));
}
function length(
UintToBytes32Map storage map
) internal view returns (uint256) {
return map._inner.length();
}
function at(
UintToBytes32Map storage map,
uint256 index
) internal view returns (uint256, bytes32) {
(bytes32 key, bytes32 value) = map._inner.at(index);
return (uint256(key), value);
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.8.0;
import {TypeCasts} from "./TypeCasts.sol";
/**
* @title Hyperlane Message Library
* @notice Library for formatted messages used by Mailbox
**/
library Message {
using TypeCasts for bytes32;
uint256 private constant VERSION_OFFSET = 0;
uint256 private constant NONCE_OFFSET = 1;
uint256 private constant ORIGIN_OFFSET = 5;
uint256 private constant SENDER_OFFSET = 9;
uint256 private constant DESTINATION_OFFSET = 41;
uint256 private constant RECIPIENT_OFFSET = 45;
uint256 private constant BODY_OFFSET = 77;
/**
* @notice Returns formatted (packed) Hyperlane message with provided fields
* @dev This function should only be used in memory message construction.
* @param _version The version of the origin and destination Mailboxes
* @param _nonce A nonce to uniquely identify the message on its origin chain
* @param _originDomain Domain of origin chain
* @param _sender Address of sender as bytes32
* @param _destinationDomain Domain of destination chain
* @param _recipient Address of recipient on destination chain as bytes32
* @param _messageBody Raw bytes of message body
* @return Formatted message
*/
function formatMessage(
uint8 _version,
uint32 _nonce,
uint32 _originDomain,
bytes32 _sender,
uint32 _destinationDomain,
bytes32 _recipient,
bytes calldata _messageBody
) internal pure returns (bytes memory) {
return
abi.encodePacked(
_version,
_nonce,
_originDomain,
_sender,
_destinationDomain,
_recipient,
_messageBody
);
}
/**
* @notice Returns the message ID.
* @param _message ABI encoded Hyperlane message.
* @return ID of `_message`
*/
function id(bytes memory _message) internal pure returns (bytes32) {
return keccak256(_message);
}
/**
* @notice Returns the message version.
* @param _message ABI encoded Hyperlane message.
* @return Version of `_message`
*/
function version(bytes calldata _message) internal pure returns (uint8) {
return uint8(bytes1(_message[VERSION_OFFSET:NONCE_OFFSET]));
}
/**
* @notice Returns the message nonce.
* @param _message ABI encoded Hyperlane message.
* @return Nonce of `_message`
*/
function nonce(bytes calldata _message) internal pure returns (uint32) {
return uint32(bytes4(_message[NONCE_OFFSET:ORIGIN_OFFSET]));
}
/**
* @notice Returns the message origin domain.
* @param _message ABI encoded Hyperlane message.
* @return Origin domain of `_message`
*/
function origin(bytes calldata _message) internal pure returns (uint32) {
return uint32(bytes4(_message[ORIGIN_OFFSET:SENDER_OFFSET]));
}
/**
* @notice Returns the message sender as bytes32.
* @param _message ABI encoded Hyperlane message.
* @return Sender of `_message` as bytes32
*/
function sender(bytes calldata _message) internal pure returns (bytes32) {
return bytes32(_message[SENDER_OFFSET:DESTINATION_OFFSET]);
}
/**
* @notice Returns the message sender as address.
* @param _message ABI encoded Hyperlane message.
* @return Sender of `_message` as address
*/
function senderAddress(
bytes calldata _message
) internal pure returns (address) {
return sender(_message).bytes32ToAddress();
}
/**
* @notice Returns the message destination domain.
* @param _message ABI encoded Hyperlane message.
* @return Destination domain of `_message`
*/
function destination(
bytes calldata _message
) internal pure returns (uint32) {
return uint32(bytes4(_message[DESTINATION_OFFSET:RECIPIENT_OFFSET]));
}
/**
* @notice Returns the message recipient as bytes32.
* @param _message ABI encoded Hyperlane message.
* @return Recipient of `_message` as bytes32
*/
function recipient(
bytes calldata _message
) internal pure returns (bytes32) {
return bytes32(_message[RECIPIENT_OFFSET:BODY_OFFSET]);
}
/**
* @notice Returns the message recipient as address.
* @param _message ABI encoded Hyperlane message.
* @return Recipient of `_message` as address
*/
function recipientAddress(
bytes calldata _message
) internal pure returns (address) {
return recipient(_message).bytes32ToAddress();
}
/**
* @notice Returns the message body.
* @param _message ABI encoded Hyperlane message.
* @return Body of `_message`
*/
function body(
bytes calldata _message
) internal pure returns (bytes calldata) {
return bytes(_message[BODY_OFFSET:]);
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.6.11;
library TypeCasts {
// alignment preserving cast
function addressToBytes32(address _addr) internal pure returns (bytes32) {
return bytes32(uint256(uint160(_addr)));
}
// alignment preserving cast
function bytes32ToAddress(bytes32 _buf) internal pure returns (address) {
return address(uint160(uint256(_buf)));
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity >=0.8.0;
import {TokenRouter} from "./libs/TokenRouter.sol";
import {ERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
/**
* @title Hyperlane ERC20 Token Router that extends ERC20 with remote transfer functionality.
* @author Abacus Works
* @dev Supply on each chain is not constant but the aggregate supply across all chains is.
*/
contract HypERC20 is ERC20Upgradeable, TokenRouter {
uint8 private immutable _decimals;
constructor(uint8 __decimals, address _mailbox) TokenRouter(_mailbox) {
_decimals = __decimals;
}
/**
* @notice Initializes the Hyperlane router, ERC20 metadata, and mints initial supply to deployer.
* @param _totalSupply The initial supply of the token.
* @param _name The name of the token.
* @param _symbol The symbol of the token.
*/
function initialize(
uint256 _totalSupply,
string memory _name,
string memory _symbol,
address _hook,
address _interchainSecurityModule,
address _owner
) external initializer {
// Initialize ERC20 metadata
__ERC20_init(_name, _symbol);
_mint(msg.sender, _totalSupply);
_MailboxClient_initialize(_hook, _interchainSecurityModule, _owner);
}
function decimals() public view override returns (uint8) {
return _decimals;
}
function balanceOf(
address _account
)
public
view
virtual
override(TokenRouter, ERC20Upgradeable)
returns (uint256)
{
return ERC20Upgradeable.balanceOf(_account);
}
/**
* @dev Burns `_amount` of token from `msg.sender` balance.
* @inheritdoc TokenRouter
*/
function _transferFromSender(
uint256 _amount
) internal override returns (bytes memory) {
_burn(msg.sender, _amount);
return bytes(""); // no metadata
}
/**
* @dev Mints `_amount` of token to `_recipient` balance.
* @inheritdoc TokenRouter
*/
function _transferTo(
address _recipient,
uint256 _amount,
bytes calldata // no metadata
) internal virtual override {
_mint(_recipient, _amount);
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.8.0;
library TokenMessage {
function format(
bytes32 _recipient,
uint256 _amount,
bytes memory _metadata
) internal pure returns (bytes memory) {
return abi.encodePacked(_recipient, _amount, _metadata);
}
function recipient(bytes calldata message) internal pure returns (bytes32) {
return bytes32(message[0:32]);
}
function amount(bytes calldata message) internal pure returns (uint256) {
return uint256(bytes32(message[32:64]));
}
// alias for ERC721
function tokenId(bytes calldata message) internal pure returns (uint256) {
return amount(message);
}
function metadata(
bytes calldata message
) internal pure returns (bytes calldata) {
return message[64:];
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity >=0.8.0;
import {IPostDispatchHook} from "../../interfaces/hooks/IPostDispatchHook.sol";
import {GasRouter} from "../../client/GasRouter.sol";
import {MailboxClient} from "../../client/MailboxClient.sol";
import {TypeCasts} from "../../libs/TypeCasts.sol";
import {TokenMessage} from "./TokenMessage.sol";
/**
* @title Hyperlane Token Router that extends Router with abstract token (ERC20/ERC721) remote transfer functionality.
* @author Abacus Works
*/
abstract contract TokenRouter is GasRouter {
using TypeCasts for bytes32;
using TypeCasts for address;
using TokenMessage for bytes;
/**
* @dev Emitted on `transferRemote` when a transfer message is dispatched.
* @param destination The identifier of the destination chain.
* @param recipient The address of the recipient on the destination chain.
* @param amount The amount of tokens burnt on the origin chain.
*/
event SentTransferRemote(
uint32 indexed destination,
bytes32 indexed recipient,
uint256 amount
);
/**
* @dev Emitted on `_handle` when a transfer message is processed.
* @param origin The identifier of the origin chain.
* @param recipient The address of the recipient on the destination chain.
* @param amount The amount of tokens minted on the destination chain.
*/
event ReceivedTransferRemote(
uint32 indexed origin,
bytes32 indexed recipient,
uint256 amount
);
constructor(address _mailbox) GasRouter(_mailbox) {}
/**
* @notice Transfers `_amountOrId` token to `_recipient` on `_destination` domain.
* @dev Delegates transfer logic to `_transferFromSender` implementation.
* @dev Emits `SentTransferRemote` event on the origin chain.
* @param _destination The identifier of the destination chain.
* @param _recipient The address of the recipient on the destination chain.
* @param _amountOrId The amount or identifier of tokens to be sent to the remote recipient.
* @return messageId The identifier of the dispatched message.
*/
function transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amountOrId
) external payable virtual returns (bytes32 messageId) {
return
_transferRemote(_destination, _recipient, _amountOrId, msg.value);
}
/**
* @notice Transfers `_amountOrId` token to `_recipient` on `_destination` domain with a specified hook
* @dev Delegates transfer logic to `_transferFromSender` implementation.
* @dev The metadata is the token metadata, and is DIFFERENT than the hook metadata.
* @dev Emits `SentTransferRemote` event on the origin chain.
* @param _destination The identifier of the destination chain.
* @param _recipient The address of the recipient on the destination chain.
* @param _amountOrId The amount or identifier of tokens to be sent to the remote recipient.
* @param _hookMetadata The metadata passed into the hook
* @param _hook The post dispatch hook to be called by the Mailbox
* @return messageId The identifier of the dispatched message.
*/
function transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amountOrId,
bytes calldata _hookMetadata,
address _hook
) external payable virtual returns (bytes32 messageId) {
return
_transferRemote(
_destination,
_recipient,
_amountOrId,
msg.value,
_hookMetadata,
_hook
);
}
function _transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amountOrId,
uint256 _value
) internal returns (bytes32 messageId) {
return
_transferRemote(
_destination,
_recipient,
_amountOrId,
_value,
_GasRouter_hookMetadata(_destination),
address(hook)
);
}
function _transferRemote(
uint32 _destination,
bytes32 _recipient,
uint256 _amountOrId,
uint256 _value,
bytes memory _hookMetadata,
address _hook
) internal virtual returns (bytes32 messageId) {
bytes memory _tokenMetadata = _transferFromSender(_amountOrId);
bytes memory _tokenMessage = TokenMessage.format(
_recipient,
_amountOrId,
_tokenMetadata
);
messageId = _Router_dispatch(
_destination,
_value,
_tokenMessage,
_hookMetadata,
_hook
);
emit SentTransferRemote(_destination, _recipient, _amountOrId);
}
/**
* @dev Should transfer `_amountOrId` of tokens from `msg.sender` to this token router.
* @dev Called by `transferRemote` before message dispatch.
* @dev Optionally returns `metadata` associated with the transfer to be passed in message.
*/
function _transferFromSender(
uint256 _amountOrId
) internal virtual returns (bytes memory metadata);
/**
* @notice Returns the balance of `account` on this token router.
* @param account The address to query the balance of.
* @return The balance of `account`.
*/
function balanceOf(address account) external virtual returns (uint256);
/**
* @dev Mints tokens to recipient when router receives transfer message.
* @dev Emits `ReceivedTransferRemote` event on the destination chain.
* @param _origin The identifier of the origin chain.
* @param _message The encoded remote transfer message containing the recipient address and amount.
*/
function _handle(
uint32 _origin,
bytes32,
bytes calldata _message
) internal virtual override {
bytes32 recipient = _message.recipient();
uint256 amount = _message.amount();
bytes calldata metadata = _message.metadata();
_transferTo(recipient.bytes32ToAddress(), amount, metadata);
emit ReceivedTransferRemote(_origin, recipient, amount);
}
/**
* @dev Should transfer `_amountOrId` of tokens from this token router to `_recipient`.
* @dev Called by `handle` after message decoding.
* @dev Optionally handles `metadata` associated with transfer passed in message.
*/
function _transferTo(
address _recipient,
uint256 _amountOrId,
bytes calldata metadata
) internal virtual;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```solidity
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
*
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized != type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Returns the highest version that has been initialized. See {reinitializer}.
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20Upgradeable.sol";
import "./extensions/IERC20MetadataUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(address from, address to, uint256 amount) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[45] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20Upgradeable.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)
pragma solidity ^0.8.0;
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
import "./math/SignedMath.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `int256` to its ASCII `string` decimal representation.
*/
function toString(int256 value) internal pure returns (string memory) {
return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
/**
* @dev Returns true if the two strings are equal.
*/
function equal(string memory a, string memory b) internal pure returns (bool) {
return keccak256(bytes(a)) == keccak256(bytes(b));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
// Solidity will revert if denominator == 0, unlike the div opcode on its own.
// The surrounding unchecked block does not change this fact.
// See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1, "Math: mulDiv overflow");
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10 ** 64) {
value /= 10 ** 64;
result += 64;
}
if (value >= 10 ** 32) {
value /= 10 ** 32;
result += 32;
}
if (value >= 10 ** 16) {
value /= 10 ** 16;
result += 16;
}
if (value >= 10 ** 8) {
value /= 10 ** 8;
result += 8;
}
if (value >= 10 ** 4) {
value /= 10 ** 4;
result += 4;
}
if (value >= 10 ** 2) {
value /= 10 ** 2;
result += 2;
}
if (value >= 10 ** 1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 256, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard signed math utilities missing in the Solidity language.
*/
library SignedMath {
/**
* @dev Returns the largest of two signed numbers.
*/
function max(int256 a, int256 b) internal pure returns (int256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two signed numbers.
*/
function min(int256 a, int256 b) internal pure returns (int256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two signed numbers without overflow.
* The result is rounded towards zero.
*/
function average(int256 a, int256 b) internal pure returns (int256) {
// Formula from the book "Hacker's Delight"
int256 x = (a & b) + ((a ^ b) >> 1);
return x + (int256(uint256(x) >> 255) & (a ^ b));
}
/**
* @dev Returns the absolute unsigned value of a signed value.
*/
function abs(int256 n) internal pure returns (uint256) {
unchecked {
// must be unchecked in order to support `n = type(int256).min`
return uint256(n >= 0 ? n : -n);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableMap.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableMap.js.
pragma solidity ^0.8.0;
import "./EnumerableSet.sol";
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```solidity
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* The following map types are supported:
*
* - `uint256 -> address` (`UintToAddressMap`) since v3.0.0
* - `address -> uint256` (`AddressToUintMap`) since v4.6.0
* - `bytes32 -> bytes32` (`Bytes32ToBytes32Map`) since v4.6.0
* - `uint256 -> uint256` (`UintToUintMap`) since v4.7.0
* - `bytes32 -> uint256` (`Bytes32ToUintMap`) since v4.7.0
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableMap, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableMap.
* ====
*/
library EnumerableMap {
using EnumerableSet for EnumerableSet.Bytes32Set;
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct Bytes32ToBytes32Map {
// Storage of keys
EnumerableSet.Bytes32Set _keys;
mapping(bytes32 => bytes32) _values;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(Bytes32ToBytes32Map storage map, bytes32 key, bytes32 value) internal returns (bool) {
map._values[key] = value;
return map._keys.add(key);
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(Bytes32ToBytes32Map storage map, bytes32 key) internal returns (bool) {
delete map._values[key];
return map._keys.remove(key);
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool) {
return map._keys.contains(key);
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function length(Bytes32ToBytes32Map storage map) internal view returns (uint256) {
return map._keys.length();
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32ToBytes32Map storage map, uint256 index) internal view returns (bytes32, bytes32) {
bytes32 key = map._keys.at(index);
return (key, map._values[key]);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool, bytes32) {
bytes32 value = map._values[key];
if (value == bytes32(0)) {
return (contains(map, key), bytes32(0));
} else {
return (true, value);
}
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || contains(map, key), "EnumerableMap: nonexistent key");
return value;
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
Bytes32ToBytes32Map storage map,
bytes32 key,
string memory errorMessage
) internal view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || contains(map, key), errorMessage);
return value;
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(Bytes32ToBytes32Map storage map) internal view returns (bytes32[] memory) {
return map._keys.values();
}
// UintToUintMap
struct UintToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToUintMap storage map, uint256 key, uint256 value) internal returns (bool) {
return set(map._inner, bytes32(key), bytes32(value));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToUintMap storage map, uint256 key) internal returns (bool) {
return remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToUintMap storage map, uint256 key) internal view returns (bool) {
return contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToUintMap storage map, uint256 index) internal view returns (uint256, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (uint256(key), uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(UintToUintMap storage map, uint256 key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToUintMap storage map, uint256 key) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(key)));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(UintToUintMap storage map, uint256 key, string memory errorMessage) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(key), errorMessage));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(UintToUintMap storage map) internal view returns (uint256[] memory) {
bytes32[] memory store = keys(map._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintToAddressMap
struct UintToAddressMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
UintToAddressMap storage map,
uint256 key,
string memory errorMessage
) internal view returns (address) {
return address(uint160(uint256(get(map._inner, bytes32(key), errorMessage))));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(UintToAddressMap storage map) internal view returns (uint256[] memory) {
bytes32[] memory store = keys(map._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressToUintMap
struct AddressToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(AddressToUintMap storage map, address key, uint256 value) internal returns (bool) {
return set(map._inner, bytes32(uint256(uint160(key))), bytes32(value));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(AddressToUintMap storage map, address key) internal returns (bool) {
return remove(map._inner, bytes32(uint256(uint160(key))));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(AddressToUintMap storage map, address key) internal view returns (bool) {
return contains(map._inner, bytes32(uint256(uint160(key))));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(AddressToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressToUintMap storage map, uint256 index) internal view returns (address, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (address(uint160(uint256(key))), uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(AddressToUintMap storage map, address key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(uint256(uint160(key))));
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(AddressToUintMap storage map, address key) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(uint256(uint160(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
AddressToUintMap storage map,
address key,
string memory errorMessage
) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(uint256(uint160(key))), errorMessage));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(AddressToUintMap storage map) internal view returns (address[] memory) {
bytes32[] memory store = keys(map._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// Bytes32ToUintMap
struct Bytes32ToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(Bytes32ToUintMap storage map, bytes32 key, uint256 value) internal returns (bool) {
return set(map._inner, key, bytes32(value));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(Bytes32ToUintMap storage map, bytes32 key) internal returns (bool) {
return remove(map._inner, key);
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool) {
return contains(map._inner, key);
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(Bytes32ToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32ToUintMap storage map, uint256 index) internal view returns (bytes32, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (key, uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, key);
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(Bytes32ToUintMap storage map, bytes32 key) internal view returns (uint256) {
return uint256(get(map._inner, key));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
Bytes32ToUintMap storage map,
bytes32 key,
string memory errorMessage
) internal view returns (uint256) {
return uint256(get(map._inner, key, errorMessage));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(Bytes32ToUintMap storage map) internal view returns (bytes32[] memory) {
bytes32[] memory store = keys(map._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```solidity
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}