Contract Name:
OrbiterXRouterV3
Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Multicall.sol)
pragma solidity ^0.8.17;
import "@openzeppelin/contracts/utils/Address.sol";
/**
* @dev Provides a function to batch together multiple calls in a single external call.
*
* _Available since v4.1._
*/
abstract contract Multicall {
/**
* @dev Receives and executes a batch of function calls on this contract.
*/
function multicall(bytes[] calldata data) external payable virtual returns (bytes[] memory results) {
results = new bytes[](data.length);
for (uint256 i = 0; i < data.length; i++) {
results[i] = Address.functionDelegateCall(address(this), data[i]);
}
return results;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;
import "./Multicall.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
interface IERC20 {
function transfer(
address recipient,
uint256 amount
) external returns (bool);
function balanceOf(address account) external view returns (uint256);
function allowance(
address owner,
address spender
) external view returns (uint256);
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
contract OrbiterXRouterV1 is Ownable, Multicall {
mapping(address => bool) public getMaker;
event ChangeMaker(address indexed maker, bool indexed enable);
constructor(address maker) {
changeMaker(maker, true);
}
receive() external payable {}
function changeMaker(address maker, bool enable) public onlyOwner {
getMaker[maker] = enable;
emit ChangeMaker(maker, enable);
}
function withdraw(address token) external onlyOwner {
if (token != address(0)) {
bool success = IERC20(token).transfer(
msg.sender,
IERC20(token).balanceOf(address(this))
);
require(success, "Withdraw Fail");
} else {
payable(msg.sender).transfer(address(this).balance);
}
}
function forward(
address token,
address payable recipient,
uint256 value
) private {
if (token == address(0)) {
require(address(this).balance >= value, "Insufficient Balance");
recipient.transfer(value);
} else {
require(
IERC20(token).allowance(msg.sender, address(this)) >= value,
"Insufficient Balance"
);
bool success = IERC20(token).transferFrom(
msg.sender,
recipient,
value
);
require(success, "Tranfer Wrong");
}
}
/// @notice This method allows you to initiate a Swap transaction
/// @dev You can call our contract Swap anywhere
/// @param recipient maker wallet address
/// @param token source chain token, chain mainToken address is 0x000....000
/// @param value source chain send token value
/// @param data Other parameters are encoded by RLP compression
function swap(
address payable recipient,
address token,
uint256 value,
bytes calldata data
)
external
payable
{
require(getMaker[recipient], "Maker does not exist");
value = token == address(0) ? msg.value : value;
forward(token, recipient, value);
}
/// @notice Swap response
/// @param recipient User receiving address
/// @param token Token sent to user
/// @param value Amount sent to user
/// @param data parameters are encoded by RLP compression = RLP(fromHash + type)
function swapAnswer(
address payable recipient,
address token,
uint256 value,
bytes calldata data
) external payable {
require(getMaker[msg.sender], "caller is not the maker");
forward(token, recipient, value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;
import "./Multicall.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
contract OrbiterXRouter is Ownable, Multicall {
using SafeERC20 for IERC20;
mapping(address => bool) public getMaker;
event ChangeMaker(address indexed maker, bool indexed enable);
constructor(address maker) {
changeMaker(maker, true);
}
receive() external payable {}
function changeMaker(address maker, bool enable) public onlyOwner {
getMaker[maker] = enable;
emit ChangeMaker(maker, enable);
}
function withdraw(address token) external onlyOwner {
if (token != address(0)) {
IERC20 coin = IERC20(token);
coin.safeTransfer(msg.sender, coin.balanceOf(address(this)));
} else {
payable(msg.sender).transfer(address(this).balance);
}
}
function forward(
address token,
address payable recipient,
uint256 value
) private {
if (token == address(0)) {
require(address(this).balance >= value, "Insufficient Balance");
recipient.transfer(value);
} else {
IERC20 coin = IERC20(token);
require(
coin.allowance(msg.sender, address(this)) >= value,
"Approve Insufficient Balance"
);
coin.safeTransferFrom(msg.sender, recipient, value);
}
}
/// @notice This method allows you to initiate a Swap transaction
/// @dev You can call our contract Swap anywhere
/// @param recipient maker wallet address
/// @param token source chain token, chain mainToken address is 0x000....000
/// @param value source chain send token value
/// @param data Other parameters are encoded by RLP compression
function swap(
address payable recipient,
address token,
uint256 value,
bytes calldata data
) external payable {
require(getMaker[recipient], "Maker does not exist");
value = token == address(0) ? msg.value : value;
forward(token, recipient, value);
}
/// @notice Swap response
/// @param recipient User receiving address
/// @param token Token sent to user
/// @param value Amount sent to user
/// @param data parameters are encoded by RLP compression
function swapAnswer(
address payable recipient,
address token,
uint256 value,
bytes calldata data
) external payable {
require(getMaker[msg.sender], "caller is not the maker");
forward(token, recipient, value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
/**
* @title OrbiterXRouterV3
* @dev A contract for batch transfers of Ether and tokens to multiple addresses.
*/
contract OrbiterXRouterV3 {
using SafeERC20 for IERC20;
bool private locked;
event Transfer(address indexed to, uint256 amount);
/**
* @dev Modifier to prevent reentrancy attacks.
*/
modifier nonReentrant() {
require(!locked, "Reentrant call");
locked = true;
_;
locked = false;
}
/**
* @dev Batch transfers Ether to multiple addresses.
* @param tos The array of destination addresses.
* @param values The array of corresponding amounts to be transferred.
*/
function transfers(
address[] calldata tos,
uint[] memory values
) external payable nonReentrant {
require(tos.length == values.length, "Destination and amount arrays length mismatch");
uint total = msg.value;
uint value;
for (uint i = 0; i < tos.length; i++) {
value = values[i];
require(total >= value, "Insufficient Balance");
total -= value;
payable(tos[i]).transfer(value);
emit Transfer(tos[i], value);
}
require(total == 0, "There are many extra costs");
}
/**
* @dev Batch transfers tokens to multiple addresses.
* @param token The token contract address.
* @param tos The array of destination addresses.
* @param values The array of corresponding amounts to be transferred.
*/
function transferTokens(
IERC20 token,
address[] calldata tos,
uint[] memory values
) external payable nonReentrant {
require(msg.value == 0, "Ether not accepted");
require(tos.length == values.length, "Destination and amount arrays length mismatch");
for (uint i = 0; i < tos.length; i++) {
token.safeTransferFrom(msg.sender, tos[i], values[i]);
}
}
/**
* @dev Transfer Ether to a specified address.
* @param to The destination address.
* @param data Optional data included in the transaction.
*/
function transfer(
address to,
bytes calldata data
) external payable nonReentrant {
payable(to).transfer(msg.value);
emit Transfer(to, msg.value);
}
/**
* @dev Transfer tokens to a specified address.
* @param token The token contract address.
* @param to The destination address.
* @param value The amount of tokens to be transferred.
* @param data Optional data included in the transaction.
*/
function transferToken(
IERC20 token,
address to,
uint value,
bytes calldata data
) external payable nonReentrant {
require(msg.value == 0, "Ether not accepted");
token.safeTransferFrom(msg.sender, to, value);
}
}
// SPDX-License-Identifier: Apache-2.0
/*
* @author Hamdi Allam [email protected]
* Please reach out with any questions or concerns
*/
pragma solidity >=0.5.10 <0.9.0;
library RLPReader {
uint8 constant STRING_SHORT_START = 0x80;
uint8 constant STRING_LONG_START = 0xb8;
uint8 constant LIST_SHORT_START = 0xc0;
uint8 constant LIST_LONG_START = 0xf8;
uint8 constant WORD_SIZE = 32;
struct RLPItem {
uint256 len;
uint256 memPtr;
}
struct Iterator {
RLPItem item; // Item that's being iterated over.
uint256 nextPtr; // Position of the next item in the list.
}
/*
* @dev Returns the next element in the iteration. Reverts if it has not next element.
* @param self The iterator.
* @return The next element in the iteration.
*/
function next(Iterator memory self) internal pure returns (RLPItem memory) {
require(hasNext(self));
uint256 ptr = self.nextPtr;
uint256 itemLength = _itemLength(ptr);
self.nextPtr = ptr + itemLength;
return RLPItem(itemLength, ptr);
}
/*
* @dev Returns true if the iteration has more elements.
* @param self The iterator.
* @return true if the iteration has more elements.
*/
function hasNext(Iterator memory self) internal pure returns (bool) {
RLPItem memory item = self.item;
return self.nextPtr < item.memPtr + item.len;
}
/*
* @param item RLP encoded bytes
*/
function toRlpItem(
bytes memory item
) internal pure returns (RLPItem memory) {
uint256 memPtr;
assembly {
memPtr := add(item, 0x20)
}
return RLPItem(item.length, memPtr);
}
/*
* @dev Create an iterator. Reverts if item is not a list.
* @param self The RLP item.
* @return An 'Iterator' over the item.
*/
function iterator(
RLPItem memory self
) internal pure returns (Iterator memory) {
require(isList(self));
uint256 ptr = self.memPtr + _payloadOffset(self.memPtr);
return Iterator(self, ptr);
}
/*
* @param the RLP item.
*/
function rlpLen(RLPItem memory item) internal pure returns (uint256) {
return item.len;
}
/*
* @param the RLP item.
* @return (memPtr, len) pair: location of the item's payload in memory.
*/
function payloadLocation(
RLPItem memory item
) internal pure returns (uint256, uint256) {
uint256 offset = _payloadOffset(item.memPtr);
uint256 memPtr = item.memPtr + offset;
uint256 len = item.len - offset; // data length
return (memPtr, len);
}
/*
* @param the RLP item.
*/
function payloadLen(RLPItem memory item) internal pure returns (uint256) {
(, uint256 len) = payloadLocation(item);
return len;
}
/*
* @param the RLP item containing the encoded list.
*/
function toList(
RLPItem memory item
) internal pure returns (RLPItem[] memory) {
require(isList(item));
uint256 items = numItems(item);
RLPItem[] memory result = new RLPItem[](items);
uint256 memPtr = item.memPtr + _payloadOffset(item.memPtr);
uint256 dataLen;
for (uint256 i = 0; i < items; ) {
dataLen = _itemLength(memPtr);
result[i] = RLPItem(dataLen, memPtr);
memPtr = memPtr + dataLen;
unchecked {
i++;
}
}
return result;
}
// @return indicator whether encoded payload is a list. negate this function call for isData.
function isList(RLPItem memory item) internal pure returns (bool) {
if (item.len == 0) return false;
uint8 byte0;
uint256 memPtr = item.memPtr;
assembly {
byte0 := byte(0, mload(memPtr))
}
if (byte0 < LIST_SHORT_START) return false;
return true;
}
/*
* @dev A cheaper version of keccak256(toRlpBytes(item)) that avoids copying memory.
* @return keccak256 hash of RLP encoded bytes.
*/
function rlpBytesKeccak256(
RLPItem memory item
) internal pure returns (bytes32) {
uint256 ptr = item.memPtr;
uint256 len = item.len;
bytes32 result;
assembly {
result := keccak256(ptr, len)
}
return result;
}
/*
* @dev A cheaper version of keccak256(toBytes(item)) that avoids copying memory.
* @return keccak256 hash of the item payload.
*/
function payloadKeccak256(
RLPItem memory item
) internal pure returns (bytes32) {
(uint256 memPtr, uint256 len) = payloadLocation(item);
bytes32 result;
assembly {
result := keccak256(memPtr, len)
}
return result;
}
/** RLPItem conversions into data types **/
// @returns raw rlp encoding in bytes
function toRlpBytes(
RLPItem memory item
) internal pure returns (bytes memory) {
bytes memory result = new bytes(item.len);
if (result.length == 0) return result;
uint256 ptr;
assembly {
ptr := add(0x20, result)
}
copy(item.memPtr, ptr, item.len);
return result;
}
// any non-zero byte except "0x80" is considered true
function toBoolean(RLPItem memory item) internal pure returns (bool) {
require(item.len == 1);
uint256 result;
uint256 memPtr = item.memPtr;
assembly {
result := byte(0, mload(memPtr))
}
// SEE Github Issue #5.
// Summary: Most commonly used RLP libraries (i.e Geth) will encode
// "0" as "0x80" instead of as "0". We handle this edge case explicitly
// here.
if (result == 0 || result == STRING_SHORT_START) {
return false;
} else {
return true;
}
}
function toAddress(RLPItem memory item) internal pure returns (address) {
// 1 byte for the length prefix
require(item.len == 21);
return address(uint160(toUint(item)));
}
function toUint(RLPItem memory item) internal pure returns (uint256) {
require(item.len > 0 && item.len <= 33);
(uint256 memPtr, uint256 len) = payloadLocation(item);
uint256 result;
assembly {
result := mload(memPtr)
// shift to the correct location if neccesary
if lt(len, 32) {
result := div(result, exp(256, sub(32, len)))
}
}
return result;
}
// enforces 32 byte length
function toUintStrict(RLPItem memory item) internal pure returns (uint256) {
// one byte prefix
require(item.len == 33);
uint256 result;
uint256 memPtr = item.memPtr + 1;
assembly {
result := mload(memPtr)
}
return result;
}
function toBytes(RLPItem memory item) internal pure returns (bytes memory) {
require(item.len > 0);
(uint256 memPtr, uint256 len) = payloadLocation(item);
bytes memory result = new bytes(len);
uint256 destPtr;
assembly {
destPtr := add(0x20, result)
}
copy(memPtr, destPtr, len);
return result;
}
/*
* Private Helpers
*/
// @return number of payload items inside an encoded list.
function numItems(RLPItem memory item) private pure returns (uint256) {
if (item.len == 0) return 0;
uint256 count = 0;
uint256 currPtr = item.memPtr + _payloadOffset(item.memPtr);
uint256 endPtr = item.memPtr + item.len;
while (currPtr < endPtr) {
currPtr = currPtr + _itemLength(currPtr); // skip over an item
count++;
}
return count;
}
// @return entire rlp item byte length
function _itemLength(uint256 memPtr) private pure returns (uint256) {
uint256 itemLen;
uint256 byte0;
assembly {
byte0 := byte(0, mload(memPtr))
}
if (byte0 < STRING_SHORT_START) {
itemLen = 1;
} else if (byte0 < STRING_LONG_START) {
itemLen = byte0 - STRING_SHORT_START + 1;
} else if (byte0 < LIST_SHORT_START) {
assembly {
let byteLen := sub(byte0, 0xb7) // # of bytes the actual length is
memPtr := add(memPtr, 1) // skip over the first byte
/* 32 byte word size */
let dataLen := div(mload(memPtr), exp(256, sub(32, byteLen))) // right shifting to get the len
itemLen := add(dataLen, add(byteLen, 1))
}
} else if (byte0 < LIST_LONG_START) {
itemLen = byte0 - LIST_SHORT_START + 1;
} else {
assembly {
let byteLen := sub(byte0, 0xf7)
memPtr := add(memPtr, 1)
let dataLen := div(mload(memPtr), exp(256, sub(32, byteLen))) // right shifting to the correct length
itemLen := add(dataLen, add(byteLen, 1))
}
}
return itemLen;
}
// @return number of bytes until the data
function _payloadOffset(uint256 memPtr) private pure returns (uint256) {
uint256 byte0;
assembly {
byte0 := byte(0, mload(memPtr))
}
if (byte0 < STRING_SHORT_START) {
return 0;
} else if (
byte0 < STRING_LONG_START ||
(byte0 >= LIST_SHORT_START && byte0 < LIST_LONG_START)
) {
return 1;
} else if (byte0 < LIST_SHORT_START) {
// being explicit
return byte0 - (STRING_LONG_START - 1) + 1;
} else {
return byte0 - (LIST_LONG_START - 1) + 1;
}
}
/*
* @param src Pointer to source
* @param dest Pointer to destination
* @param len Amount of memory to copy from the source
*/
function copy(uint256 src, uint256 dest, uint256 len) private pure {
if (len == 0) return;
// copy as many word sizes as possible
for (; len >= WORD_SIZE; len -= WORD_SIZE) {
assembly {
mstore(dest, mload(src))
}
src += WORD_SIZE;
dest += WORD_SIZE;
}
if (len > 0) {
// left over bytes. Mask is used to remove unwanted bytes from the word
uint256 mask = 256 ** (WORD_SIZE - len) - 1;
assembly {
let srcpart := and(mload(src), not(mask)) // zero out src
let destpart := and(mload(dest), mask) // retrieve the bytes
mstore(dest, or(destpart, srcpart))
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
contract TestToken is ERC20 {
uint8 private precision;
constructor(
uint256 initialSupply,
uint8 _precision,
string memory _symbol
) ERC20("TestToken", _symbol) {
precision = _precision;
_mint(msg.sender, initialSupply);
}
function decimals() public view virtual override returns (uint8) {
return precision;
}
}