Contract Name:
WETHGateway
Contract Source Code:
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import './Context.sol';
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), 'Ownable: caller is not the owner');
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
import {IRewarder} from './IRewarder.sol';
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
/**
* @dev Emitted after the mint action
* @param from The address performing the mint
* @param value The amount being
* @param index The new liquidity index of the reserve
**/
event Mint(address indexed from, uint256 value, uint256 index);
/**
* @dev Mints `amount` aTokens to `user`
* @param user The address receiving the minted tokens
* @param amount The amount of tokens getting minted
* @param index The new liquidity index of the reserve
* @return `true` if the the previous balance of the user was 0
*/
function mint(
address user,
uint256 amount,
uint256 index
) external returns (bool);
/**
* @dev Emitted after aTokens are burned
* @param from The owner of the aTokens, getting them burned
* @param target The address that will receive the underlying
* @param value The amount being burned
* @param index The new liquidity index of the reserve
**/
event Burn(address indexed from, address indexed target, uint256 value, uint256 index);
/**
* @dev Emitted during the transfer action
* @param from The user whose tokens are being transferred
* @param to The recipient
* @param value The amount being transferred
* @param index The new liquidity index of the reserve
**/
event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);
/**
* @dev Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
* @param user The owner of the aTokens, getting them burned
* @param receiverOfUnderlying The address that will receive the underlying
* @param amount The amount being burned
* @param index The new liquidity index of the reserve
**/
function burn(
address user,
address receiverOfUnderlying,
uint256 amount,
uint256 index
) external;
/**
* @dev Mints aTokens to the reserve treasury
* @param amount The amount of tokens getting minted
* @param index The new liquidity index of the reserve
*/
function mintToTreasury(uint256 amount, uint256 index) external;
/**
* @dev Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
* @param from The address getting liquidated, current owner of the aTokens
* @param to The recipient
* @param value The amount of tokens getting transferred
**/
function transferOnLiquidation(
address from,
address to,
uint256 value
) external;
/**
* @dev Transfers the underlying asset to `target`. Used by the LendingPool to transfer
* assets in borrow(), withdraw() and flashLoan()
* @param user The recipient of the underlying
* @param amount The amount getting transferred
* @return The amount transferred
**/
function transferUnderlyingTo(address user, uint256 amount) external returns (uint256);
/**
* @dev Invoked to execute actions on the aToken side after a repayment.
* @param user The user executing the repayment
* @param amount The amount getting repaid
**/
function handleRepayment(address user, uint256 amount) external;
/**
* @dev Returns the address of the incentives controller contract
**/
function getIncentivesController() external view returns (IRewarder);
/**
* @dev Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
**/
function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {ILendingPool} from './ILendingPool.sol';
import {IRewarder} from './IRewarder.sol';
/**
* @title IInitializableAToken
* @notice Interface for the initialize function on AToken
* @author Aave
**/
interface IInitializableAToken {
/**
* @dev Emitted when an aToken is initialized
* @param underlyingAsset The address of the underlying asset
* @param pool The address of the associated lending pool
* @param treasury The address of the treasury
* @param incentivesController The address of the incentives controller for this aToken
* @param aTokenDecimals the decimals of the underlying
* @param aTokenName the name of the aToken
* @param aTokenSymbol the symbol of the aToken
* @param params A set of encoded parameters for additional initialization
**/
event Initialized(
address indexed underlyingAsset,
address indexed pool,
address treasury,
address incentivesController,
uint8 aTokenDecimals,
string aTokenName,
string aTokenSymbol,
bytes params
);
/**
* @dev Initializes the aToken
* @param pool The address of the lending pool where this aToken will be used
* @param treasury The address of the Aave treasury, receiving the fees on this aToken
* @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
* @param incentivesController The smart contract managing potential incentives distribution
* @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
* @param aTokenName The name of the aToken
* @param aTokenSymbol The symbol of the aToken
*/
function initialize(
ILendingPool pool,
address treasury,
address underlyingAsset,
IRewarder incentivesController,
uint8 aTokenDecimals,
string calldata aTokenName,
string calldata aTokenSymbol,
bytes calldata params
) external;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import {ILendingPoolAddressesProvider} from './ILendingPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
interface ILendingPool {
/**
* @dev Emitted on deposit()
* @param reserve The address of the underlying asset of the reserve
* @param user The address initiating the deposit
* @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
* @param amount The amount deposited
* @param referral The referral code used
**/
event Deposit(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint16 indexed referral
);
/**
* @dev Emitted on withdraw()
* @param reserve The address of the underlyng asset being withdrawn
* @param user The address initiating the withdrawal, owner of aTokens
* @param to Address that will receive the underlying
* @param amount The amount to be withdrawn
**/
event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
/**
* @dev Emitted on borrow() and flashLoan() when debt needs to be opened
* @param reserve The address of the underlying asset being borrowed
* @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
* initiator of the transaction on flashLoan()
* @param onBehalfOf The address that will be getting the debt
* @param amount The amount borrowed out
* @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
* @param borrowRate The numeric rate at which the user has borrowed
* @param referral The referral code used
**/
event Borrow(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint256 borrowRateMode,
uint256 borrowRate,
uint16 indexed referral
);
/**
* @dev Emitted on repay()
* @param reserve The address of the underlying asset of the reserve
* @param user The beneficiary of the repayment, getting his debt reduced
* @param repayer The address of the user initiating the repay(), providing the funds
* @param amount The amount repaid
**/
event Repay(
address indexed reserve,
address indexed user,
address indexed repayer,
uint256 amount
);
/**
* @dev Emitted on swapBorrowRateMode()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user swapping his rate mode
* @param rateMode The rate mode that the user wants to swap to
**/
event Swap(address indexed reserve, address indexed user, uint256 rateMode);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
**/
event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
**/
event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on rebalanceStableBorrowRate()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user for which the rebalance has been executed
**/
event RebalanceStableBorrowRate(address indexed reserve, address indexed user);
/**
* @dev Emitted on flashLoan()
* @param target The address of the flash loan receiver contract
* @param initiator The address initiating the flash loan
* @param asset The address of the asset being flash borrowed
* @param amount The amount flash borrowed
* @param premium The fee flash borrowed
* @param referralCode The referral code used
**/
event FlashLoan(
address indexed target,
address indexed initiator,
address indexed asset,
uint256 amount,
uint256 premium,
uint16 referralCode
);
/**
* @dev Emitted when the pause is triggered.
*/
event Paused();
/**
* @dev Emitted when the pause is lifted.
*/
event Unpaused();
/**
* @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
* LendingPoolCollateral manager using a DELEGATECALL
* This allows to have the events in the generated ABI for LendingPool.
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
* @param liquidator The address of the liquidator
* @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
**/
event LiquidationCall(
address indexed collateralAsset,
address indexed debtAsset,
address indexed user,
uint256 debtToCover,
uint256 liquidatedCollateralAmount,
address liquidator,
bool receiveAToken
);
/**
* @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
* in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
* the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
* gets added to the LendingPool ABI
* @param reserve The address of the underlying asset of the reserve
* @param liquidityRate The new liquidity rate
* @param stableBorrowRate The new stable borrow rate
* @param variableBorrowRate The new variable borrow rate
* @param liquidityIndex The new liquidity index
* @param variableBorrowIndex The new variable borrow index
**/
event ReserveDataUpdated(
address indexed reserve,
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate,
uint256 liquidityIndex,
uint256 variableBorrowIndex
);
/**
* @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
* - E.g. User deposits 100 USDC and gets in return 100 aUSDC
* @param asset The address of the underlying asset to deposit
* @param amount The amount to be deposited
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
**/
function deposit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
/**
* @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
* E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
* @param asset The address of the underlying asset to withdraw
* @param amount The underlying amount to be withdrawn
* - Send the value type(uint256).max in order to withdraw the whole aToken balance
* @param to Address that will receive the underlying, same as msg.sender if the user
* wants to receive it on his own wallet, or a different address if the beneficiary is a
* different wallet
* @return The final amount withdrawn
**/
function withdraw(
address asset,
uint256 amount,
address to
) external returns (uint256);
/**
* @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
* already deposited enough collateral, or he was given enough allowance by a credit delegator on the
* corresponding debt token (StableDebtToken or VariableDebtToken)
* - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
* and 100 stable/variable debt tokens, depending on the `interestRateMode`
* @param asset The address of the underlying asset to borrow
* @param amount The amount to be borrowed
* @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
* calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
* if he has been given credit delegation allowance
**/
function borrow(
address asset,
uint256 amount,
uint256 interestRateMode,
uint16 referralCode,
address onBehalfOf
) external;
/**
* @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
* - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @return The final amount repaid
**/
function repay(
address asset,
uint256 amount,
uint256 rateMode,
address onBehalfOf
) external returns (uint256);
/**
* @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
* @param asset The address of the underlying asset borrowed
* @param rateMode The rate mode that the user wants to swap to
**/
function swapBorrowRateMode(address asset, uint256 rateMode) external;
/**
* @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
* - Users can be rebalanced if the following conditions are satisfied:
* 1. Usage ratio is above 95%
* 2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
* borrowed at a stable rate and depositors are not earning enough
* @param asset The address of the underlying asset borrowed
* @param user The address of the user to be rebalanced
**/
function rebalanceStableBorrowRate(address asset, address user) external;
/**
* @dev Allows depositors to enable/disable a specific deposited asset as collateral
* @param asset The address of the underlying asset deposited
* @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
**/
function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
/**
* @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
* - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
* a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
**/
function liquidationCall(
address collateralAsset,
address debtAsset,
address user,
uint256 debtToCover,
bool receiveAToken
) external;
/**
* @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
* as long as the amount taken plus a fee is returned.
* IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
* For further details please visit https://developers.aave.com
* @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
* @param assets The addresses of the assets being flash-borrowed
* @param amounts The amounts amounts being flash-borrowed
* @param modes Types of the debt to open if the flash loan is not returned:
* 0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
* 1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* 2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* @param onBehalfOf The address that will receive the debt in the case of using on `modes` 1 or 2
* @param params Variadic packed params to pass to the receiver as extra information
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
**/
function flashLoan(
address receiverAddress,
address[] calldata assets,
uint256[] calldata amounts,
uint256[] calldata modes,
address onBehalfOf,
bytes calldata params,
uint16 referralCode
) external;
/**
* @dev Returns the user account data across all the reserves
* @param user The address of the user
* @return totalCollateralETH the total collateral in ETH of the user
* @return totalDebtETH the total debt in ETH of the user
* @return availableBorrowsETH the borrowing power left of the user
* @return currentLiquidationThreshold the liquidation threshold of the user
* @return ltv the loan to value of the user
* @return healthFactor the current health factor of the user
**/
function getUserAccountData(address user)
external
view
returns (
uint256 totalCollateralETH,
uint256 totalDebtETH,
uint256 availableBorrowsETH,
uint256 currentLiquidationThreshold,
uint256 ltv,
uint256 healthFactor
);
function initReserve(
address reserve,
address aTokenAddress,
address stableDebtAddress,
address variableDebtAddress,
address interestRateStrategyAddress
) external;
function setReserveInterestRateStrategyAddress(address reserve, address rateStrategyAddress)
external;
function setConfiguration(address reserve, uint256 configuration) external;
/**
* @dev Returns the configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The configuration of the reserve
**/
function getConfiguration(address asset)
external
view
returns (DataTypes.ReserveConfigurationMap memory);
/**
* @dev Returns the configuration of the user across all the reserves
* @param user The user address
* @return The configuration of the user
**/
function getUserConfiguration(address user)
external
view
returns (DataTypes.UserConfigurationMap memory);
/**
* @dev Returns the normalized income normalized income of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The reserve's normalized income
*/
function getReserveNormalizedIncome(address asset) external view returns (uint256);
/**
* @dev Returns the normalized variable debt per unit of asset
* @param asset The address of the underlying asset of the reserve
* @return The reserve normalized variable debt
*/
function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
/**
* @dev Returns the state and configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The state of the reserve
**/
function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);
function finalizeTransfer(
address asset,
address from,
address to,
uint256 amount,
uint256 balanceFromAfter,
uint256 balanceToBefore
) external;
function getReservesList() external view returns (address[] memory);
function getAddressesProvider() external view returns (ILendingPoolAddressesProvider);
function setPause(bool val) external;
function paused() external view returns (bool);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title LendingPoolAddressesProvider contract
* @dev Main registry of addresses part of or connected to the protocol, including permissioned roles
* - Acting also as factory of proxies and admin of those, so with right to change its implementations
* - Owned by the Aave Governance
* @author Aave
**/
interface ILendingPoolAddressesProvider {
event MarketIdSet(string newMarketId);
event LendingPoolUpdated(address indexed newAddress);
event ConfigurationAdminUpdated(address indexed newAddress);
event EmergencyAdminUpdated(address indexed newAddress);
event LendingPoolConfiguratorUpdated(address indexed newAddress);
event LendingPoolCollateralManagerUpdated(address indexed newAddress);
event PriceOracleUpdated(address indexed newAddress);
event LendingRateOracleUpdated(address indexed newAddress);
event ProxyCreated(bytes32 id, address indexed newAddress);
event AddressSet(bytes32 id, address indexed newAddress, bool hasProxy);
function getMarketId() external view returns (string memory);
function setMarketId(string calldata marketId) external;
function setAddress(bytes32 id, address newAddress) external;
function setAddressAsProxy(bytes32 id, address impl) external;
function getAddress(bytes32 id) external view returns (address);
function getLendingPool() external view returns (address);
function setLendingPoolImpl(address pool) external;
function getLendingPoolConfigurator() external view returns (address);
function setLendingPoolConfiguratorImpl(address configurator) external;
function getLendingPoolCollateralManager() external view returns (address);
function setLendingPoolCollateralManager(address manager) external;
function getPoolAdmin() external view returns (address);
function setPoolAdmin(address admin) external;
function getEmergencyAdmin() external view returns (address);
function setEmergencyAdmin(address admin) external;
function getUiSigner() external view returns (address);
function setUiSigner(address signer) external;
function getPriceOracle() external view returns (address);
function setPriceOracle(address priceOracle) external;
function getLendingRateOracle() external view returns (address);
function setLendingRateOracle(address lendingRateOracle) external;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
interface IRewarder {
event RewardsAccrued(address indexed user, uint256 amount);
event RewardsClaimed(address indexed user, address indexed to, uint256 amount);
event RewardsClaimed(
address indexed user,
address indexed to,
address indexed claimer,
uint256 amount
);
event ClaimerSet(address indexed user, address indexed claimer);
/*
* @dev Returns the configuration of the distribution for a certain asset
* @param asset The address of the reference asset of the distribution
* @return The asset index, the emission per second and the last updated timestamp
**/
function getAssetData(address asset)
external
view
returns (
uint256,
uint256,
uint256
);
/*
* LEGACY **************************
* @dev Returns the configuration of the distribution for a certain asset
* @param asset The address of the reference asset of the distribution
* @return The asset index, the emission per second and the last updated timestamp
**/
function assets(address asset)
external
view
returns (
uint128,
uint128,
uint256
);
/**
* @dev Whitelists an address to claim the rewards on behalf of another address
* @param user The address of the user
* @param claimer The address of the claimer
*/
function setClaimer(address user, address claimer) external;
/**
* @dev Returns the whitelisted claimer for a certain address (0x0 if not set)
* @param user The address of the user
* @return The claimer address
*/
function getClaimer(address user) external view returns (address);
/**
* @dev Configure assets for a certain rewards emission
* @param assets The assets to incentivize
* @param emissionsPerSecond The emission for each asset
*/
function configureAssets(address[] calldata assets, uint256[] calldata emissionsPerSecond)
external;
/**
* @dev Called by the corresponding asset on any update that affects the rewards distribution
* @param asset The address of the user
* @param userBalance The balance of the user of the asset in the lending pool
* @param totalSupply The total supply of the asset in the lending pool
**/
function handleAction(
address asset,
uint256 userBalance,
uint256 totalSupply
) external;
/**
* @dev Returns the total of rewards of an user, already accrued + not yet accrued
* @param user The address of the user
* @return The rewards
**/
function getRewardsBalance(address[] calldata assets, address user)
external
view
returns (uint256);
/**
* @dev Claims reward for an user, on all the assets of the lending pool, accumulating the pending rewards
* @param amount Amount of rewards to claim
* @param to Address that will be receiving the rewards
* @return Rewards claimed
**/
function claimRewards(
address[] calldata assets,
uint256 amount,
address to
) external returns (uint256);
/**
* @dev Claims reward for an user on behalf, on all the assets of the lending pool, accumulating the pending rewards. The caller must
* be whitelisted via "allowClaimOnBehalf" function by the RewardsAdmin role manager
* @param amount Amount of rewards to claim
* @param user Address to check and claim rewards
* @param to Address that will be receiving the rewards
* @return Rewards claimed
**/
function claimRewardsOnBehalf(
address[] calldata assets,
uint256 amount,
address user,
address to
) external returns (uint256);
/**
* @dev returns the unclaimed rewards of the user
* @param user the address of the user
* @return the unclaimed user rewards
*/
function getUserUnclaimedRewards(address user) external view returns (uint256);
/**
* @dev returns the unclaimed rewards of the user
* @param user the address of the user
* @param asset The asset to incentivize
* @return the user index for the asset
*/
function getUserAssetData(address user, address asset) external view returns (uint256);
/**
* @dev for backward compatibility with previous implementation of the Incentives controller
*/
function REWARD_TOKEN() external view returns (address);
/**
* @dev for backward compatibility with previous implementation of the Incentives controller
*/
function PRECISION() external view returns (uint8);
/**
* @dev Gets the distribution end timestamp of the emissions
*/
function DISTRIBUTION_END() external view returns (uint256);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
interface IScaledBalanceToken {
/**
* @dev Returns the scaled balance of the user. The scaled balance is the sum of all the
* updated stored balance divided by the reserve's liquidity index at the moment of the update
* @param user The user whose balance is calculated
* @return The scaled balance of the user
**/
function scaledBalanceOf(address user) external view returns (uint256);
/**
* @dev Returns the scaled balance of the user and the scaled total supply.
* @param user The address of the user
* @return The scaled balance of the user
* @return The scaled balance and the scaled total supply
**/
function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
/**
* @dev Returns the scaled total supply of the variable debt token. Represents sum(debt/index)
* @return The scaled total supply
**/
function scaledTotalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
interface IWETH {
function deposit() external payable;
function withdraw(uint256) external;
function approve(address guy, uint256 wad) external returns (bool);
function transferFrom(
address src,
address dst,
uint256 wad
) external returns (bool);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
interface IWETHGateway {
function depositETH(
address lendingPool,
address onBehalfOf,
uint16 referralCode
) external payable;
function withdrawETH(
address lendingPool,
uint256 amount,
address onBehalfOf
) external;
function repayETH(
address lendingPool,
uint256 amount,
uint256 rateMode,
address onBehalfOf
) external payable;
function borrowETH(
address lendingPool,
uint256 amount,
uint256 interesRateMode,
uint16 referralCode
) external;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import {Ownable} from '../dependencies/openzeppelin/contracts/Ownable.sol';
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IWETH} from './interfaces/IWETH.sol';
import {IWETHGateway} from './interfaces/IWETHGateway.sol';
import {ILendingPool} from '../interfaces/ILendingPool.sol';
import {IAToken} from '../interfaces/IAToken.sol';
import {ReserveConfiguration} from '../protocol/libraries/configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../protocol/libraries/configuration/UserConfiguration.sol';
import {Helpers} from '../protocol/libraries/helpers/Helpers.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
import {ILendingPoolAddressesProvider} from '../interfaces/ILendingPoolAddressesProvider.sol';
contract WETHGateway is IWETHGateway, Ownable {
using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
using UserConfiguration for DataTypes.UserConfigurationMap;
IWETH internal immutable WETH;
ILendingPoolAddressesProvider internal immutable _addressesProvider;
string private _signature;
modifier onlyUiSigner {
require(_addressesProvider.getUiSigner() == msg.sender, "Not UI Signer.");
_;
}
/**
* @dev Sets the WETH address and the LendingPoolAddressesProvider address. Infinite approves lending pool.
* @param weth Address of the Wrapped Ether contract
**/
constructor(address weth, address provider) public {
WETH = IWETH(weth);
_addressesProvider = ILendingPoolAddressesProvider(provider);
}
function authorizeLendingPool(address lendingPool) external onlyOwner {
WETH.approve(lendingPool, uint256(-1));
}
function setSignature(string calldata signature) external onlyUiSigner {
_signature = signature;
}
function getSignature() external view returns (string memory) {
return _signature;
}
/**
* @dev deposits WETH into the reserve, using native ETH. A corresponding amount of the overlying asset (aTokens)
* is minted.
* @param lendingPool address of the targeted underlying lending pool
* @param onBehalfOf address of the user who will receive the aTokens representing the deposit
* @param referralCode integrators are assigned a referral code and can potentially receive rewards.
**/
function depositETH(
address lendingPool,
address onBehalfOf,
uint16 referralCode
) external payable override {
WETH.deposit{value: msg.value}();
ILendingPool(lendingPool).deposit(address(WETH), msg.value, onBehalfOf, referralCode);
}
/**
* @dev withdraws the WETH _reserves of msg.sender.
* @param lendingPool address of the targeted underlying lending pool
* @param amount amount of aWETH to withdraw and receive native ETH
* @param to address of the user who will receive native ETH
*/
function withdrawETH(
address lendingPool,
uint256 amount,
address to
) external override {
IAToken aWETH = IAToken(ILendingPool(lendingPool).getReserveData(address(WETH)).aTokenAddress);
uint256 userBalance = aWETH.balanceOf(msg.sender);
uint256 amountToWithdraw = amount;
// if amount is equal to uint(-1), the user wants to redeem everything
if (amount == type(uint256).max) {
amountToWithdraw = userBalance;
}
aWETH.transferFrom(msg.sender, address(this), amountToWithdraw);
ILendingPool(lendingPool).withdraw(address(WETH), amountToWithdraw, address(this));
WETH.withdraw(amountToWithdraw);
_safeTransferETH(to, amountToWithdraw);
}
/**
* @dev repays a borrow on the WETH reserve, for the specified amount (or for the whole amount, if uint256(-1) is specified).
* @param lendingPool address of the targeted underlying lending pool
* @param amount the amount to repay, or uint256(-1) if the user wants to repay everything
* @param rateMode the rate mode to repay
* @param onBehalfOf the address for which msg.sender is repaying
*/
function repayETH(
address lendingPool,
uint256 amount,
uint256 rateMode,
address onBehalfOf
) external payable override {
(uint256 stableDebt, uint256 variableDebt) =
Helpers.getUserCurrentDebtMemory(
onBehalfOf,
ILendingPool(lendingPool).getReserveData(address(WETH))
);
uint256 paybackAmount =
DataTypes.InterestRateMode(rateMode) == DataTypes.InterestRateMode.STABLE
? stableDebt
: variableDebt;
if (amount < paybackAmount) {
paybackAmount = amount;
}
require(msg.value >= paybackAmount, 'msg.value is less than repayment amount');
WETH.deposit{value: paybackAmount}();
ILendingPool(lendingPool).repay(address(WETH), msg.value, rateMode, onBehalfOf);
// refund remaining dust eth
if (msg.value > paybackAmount) _safeTransferETH(msg.sender, msg.value - paybackAmount);
}
/**
* @dev borrow WETH, unwraps to ETH and send both the ETH and DebtTokens to msg.sender, via `approveDelegation` and onBehalf argument in `LendingPool.borrow`.
* @param lendingPool address of the targeted underlying lending pool
* @param amount the amount of ETH to borrow
* @param interesRateMode the interest rate mode
* @param referralCode integrators are assigned a referral code and can potentially receive rewards
*/
function borrowETH(
address lendingPool,
uint256 amount,
uint256 interesRateMode,
uint16 referralCode
) external override {
ILendingPool(lendingPool).borrow(
address(WETH),
amount,
interesRateMode,
referralCode,
msg.sender
);
WETH.withdraw(amount);
_safeTransferETH(msg.sender, amount);
}
/**
* @dev transfer ETH to an address, revert if it fails.
* @param to recipient of the transfer
* @param value the amount to send
*/
function _safeTransferETH(address to, uint256 value) internal {
(bool success, ) = to.call{value: value}(new bytes(0));
require(success, 'ETH_TRANSFER_FAILED');
}
/**
* @dev transfer ERC20 from the utility contract, for ERC20 recovery in case of stuck tokens due
* direct transfers to the contract address.
* @param token token to transfer
* @param to recipient of the transfer
* @param amount amount to send
*/
function emergencyTokenTransfer(
address token,
address to,
uint256 amount
) external onlyOwner {
IERC20(token).transfer(to, amount);
}
/**
* @dev transfer native Ether from the utility contract, for native Ether recovery in case of stuck Ether
* due selfdestructs or transfer ether to pre-computated contract address before deployment.
* @param to recipient of the transfer
* @param amount amount to send
*/
function emergencyEtherTransfer(address to, uint256 amount) external onlyOwner {
_safeTransferETH(to, amount);
}
/**
* @dev Get WETH address used by WETHGateway
*/
function getWETHAddress() external view returns (address) {
return address(WETH);
}
/**
* @dev Only WETH contract is allowed to transfer ETH here. Prevent other addresses to send Ether to this contract.
*/
receive() external payable {
require(msg.sender == address(WETH), 'Receive not allowed');
}
/**
* @dev Revert fallback calls
*/
fallback() external payable {
revert('Fallback not allowed');
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title ReserveConfiguration library
* @author Aave
* @notice Implements the bitmap logic to handle the reserve configuration
*/
library ReserveConfiguration {
uint256 constant LTV_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
uint256 constant LIQUIDATION_THRESHOLD_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
uint256 constant LIQUIDATION_BONUS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
uint256 constant DECIMALS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
uint256 constant ACTIVE_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
uint256 constant FROZEN_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
uint256 constant BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
uint256 constant STABLE_BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFF; // prettier-ignore
uint256 constant RESERVE_FACTOR_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
/// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
uint256 constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
uint256 constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
uint256 constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
uint256 constant IS_ACTIVE_START_BIT_POSITION = 56;
uint256 constant IS_FROZEN_START_BIT_POSITION = 57;
uint256 constant BORROWING_ENABLED_START_BIT_POSITION = 58;
uint256 constant STABLE_BORROWING_ENABLED_START_BIT_POSITION = 59;
uint256 constant RESERVE_FACTOR_START_BIT_POSITION = 64;
uint256 constant MAX_VALID_LTV = 65535;
uint256 constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
uint256 constant MAX_VALID_LIQUIDATION_BONUS = 65535;
uint256 constant MAX_VALID_DECIMALS = 255;
uint256 constant MAX_VALID_RESERVE_FACTOR = 65535;
/**
* @dev Sets the Loan to Value of the reserve
* @param self The reserve configuration
* @param ltv the new ltv
**/
function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
require(ltv <= MAX_VALID_LTV, Errors.RC_INVALID_LTV);
self.data = (self.data & LTV_MASK) | ltv;
}
/**
* @dev Gets the Loan to Value of the reserve
* @param self The reserve configuration
* @return The loan to value
**/
function getLtv(DataTypes.ReserveConfigurationMap storage self) internal view returns (uint256) {
return self.data & ~LTV_MASK;
}
/**
* @dev Sets the liquidation threshold of the reserve
* @param self The reserve configuration
* @param threshold The new liquidation threshold
**/
function setLiquidationThreshold(DataTypes.ReserveConfigurationMap memory self, uint256 threshold)
internal
pure
{
require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.RC_INVALID_LIQ_THRESHOLD);
self.data =
(self.data & LIQUIDATION_THRESHOLD_MASK) |
(threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
}
/**
* @dev Gets the liquidation threshold of the reserve
* @param self The reserve configuration
* @return The liquidation threshold
**/
function getLiquidationThreshold(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
}
/**
* @dev Sets the liquidation bonus of the reserve
* @param self The reserve configuration
* @param bonus The new liquidation bonus
**/
function setLiquidationBonus(DataTypes.ReserveConfigurationMap memory self, uint256 bonus)
internal
pure
{
require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.RC_INVALID_LIQ_BONUS);
self.data =
(self.data & LIQUIDATION_BONUS_MASK) |
(bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
}
/**
* @dev Gets the liquidation bonus of the reserve
* @param self The reserve configuration
* @return The liquidation bonus
**/
function getLiquidationBonus(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
}
/**
* @dev Sets the decimals of the underlying asset of the reserve
* @param self The reserve configuration
* @param decimals The decimals
**/
function setDecimals(DataTypes.ReserveConfigurationMap memory self, uint256 decimals)
internal
pure
{
require(decimals <= MAX_VALID_DECIMALS, Errors.RC_INVALID_DECIMALS);
self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
}
/**
* @dev Gets the decimals of the underlying asset of the reserve
* @param self The reserve configuration
* @return The decimals of the asset
**/
function getDecimals(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
}
/**
* @dev Sets the active state of the reserve
* @param self The reserve configuration
* @param active The active state
**/
function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
self.data =
(self.data & ACTIVE_MASK) |
(uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
}
/**
* @dev Gets the active state of the reserve
* @param self The reserve configuration
* @return The active state
**/
function getActive(DataTypes.ReserveConfigurationMap storage self) internal view returns (bool) {
return (self.data & ~ACTIVE_MASK) != 0;
}
/**
* @dev Sets the frozen state of the reserve
* @param self The reserve configuration
* @param frozen The frozen state
**/
function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
self.data =
(self.data & FROZEN_MASK) |
(uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
}
/**
* @dev Gets the frozen state of the reserve
* @param self The reserve configuration
* @return The frozen state
**/
function getFrozen(DataTypes.ReserveConfigurationMap storage self) internal view returns (bool) {
return (self.data & ~FROZEN_MASK) != 0;
}
/**
* @dev Enables or disables borrowing on the reserve
* @param self The reserve configuration
* @param enabled True if the borrowing needs to be enabled, false otherwise
**/
function setBorrowingEnabled(DataTypes.ReserveConfigurationMap memory self, bool enabled)
internal
pure
{
self.data =
(self.data & BORROWING_MASK) |
(uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
}
/**
* @dev Gets the borrowing state of the reserve
* @param self The reserve configuration
* @return The borrowing state
**/
function getBorrowingEnabled(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (bool)
{
return (self.data & ~BORROWING_MASK) != 0;
}
/**
* @dev Enables or disables stable rate borrowing on the reserve
* @param self The reserve configuration
* @param enabled True if the stable rate borrowing needs to be enabled, false otherwise
**/
function setStableRateBorrowingEnabled(
DataTypes.ReserveConfigurationMap memory self,
bool enabled
) internal pure {
self.data =
(self.data & STABLE_BORROWING_MASK) |
(uint256(enabled ? 1 : 0) << STABLE_BORROWING_ENABLED_START_BIT_POSITION);
}
/**
* @dev Gets the stable rate borrowing state of the reserve
* @param self The reserve configuration
* @return The stable rate borrowing state
**/
function getStableRateBorrowingEnabled(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (bool)
{
return (self.data & ~STABLE_BORROWING_MASK) != 0;
}
/**
* @dev Sets the reserve factor of the reserve
* @param self The reserve configuration
* @param reserveFactor The reserve factor
**/
function setReserveFactor(DataTypes.ReserveConfigurationMap memory self, uint256 reserveFactor)
internal
pure
{
require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.RC_INVALID_RESERVE_FACTOR);
self.data =
(self.data & RESERVE_FACTOR_MASK) |
(reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
}
/**
* @dev Gets the reserve factor of the reserve
* @param self The reserve configuration
* @return The reserve factor
**/
function getReserveFactor(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
}
/**
* @dev Gets the configuration flags of the reserve
* @param self The reserve configuration
* @return The state flags representing active, frozen, borrowing enabled, stableRateBorrowing enabled
**/
function getFlags(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (
bool,
bool,
bool,
bool
)
{
uint256 dataLocal = self.data;
return (
(dataLocal & ~ACTIVE_MASK) != 0,
(dataLocal & ~FROZEN_MASK) != 0,
(dataLocal & ~BORROWING_MASK) != 0,
(dataLocal & ~STABLE_BORROWING_MASK) != 0
);
}
/**
* @dev Gets the configuration paramters of the reserve
* @param self The reserve configuration
* @return The state params representing ltv, liquidation threshold, liquidation bonus, the reserve decimals
**/
function getParams(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256
)
{
uint256 dataLocal = self.data;
return (
dataLocal & ~LTV_MASK,
(dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
(dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
(dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
(dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
);
}
/**
* @dev Gets the configuration paramters of the reserve from a memory object
* @param self The reserve configuration
* @return The state params representing ltv, liquidation threshold, liquidation bonus, the reserve decimals
**/
function getParamsMemory(DataTypes.ReserveConfigurationMap memory self)
internal
pure
returns (
uint256,
uint256,
uint256,
uint256,
uint256
)
{
return (
self.data & ~LTV_MASK,
(self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
(self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
(self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
(self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
);
}
/**
* @dev Gets the configuration flags of the reserve from a memory object
* @param self The reserve configuration
* @return The state flags representing active, frozen, borrowing enabled, stableRateBorrowing enabled
**/
function getFlagsMemory(DataTypes.ReserveConfigurationMap memory self)
internal
pure
returns (
bool,
bool,
bool,
bool
)
{
return (
(self.data & ~ACTIVE_MASK) != 0,
(self.data & ~FROZEN_MASK) != 0,
(self.data & ~BORROWING_MASK) != 0,
(self.data & ~STABLE_BORROWING_MASK) != 0
);
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title UserConfiguration library
* @author Aave
* @notice Implements the bitmap logic to handle the user configuration
*/
library UserConfiguration {
uint256 internal constant BORROWING_MASK =
0x5555555555555555555555555555555555555555555555555555555555555555;
/**
* @dev Sets if the user is borrowing the reserve identified by reserveIndex
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @param borrowing True if the user is borrowing the reserve, false otherwise
**/
function setBorrowing(
DataTypes.UserConfigurationMap storage self,
uint256 reserveIndex,
bool borrowing
) internal {
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
self.data =
(self.data & ~(1 << (reserveIndex * 2))) |
(uint256(borrowing ? 1 : 0) << (reserveIndex * 2));
}
/**
* @dev Sets if the user is using as collateral the reserve identified by reserveIndex
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @param usingAsCollateral True if the user is usin the reserve as collateral, false otherwise
**/
function setUsingAsCollateral(
DataTypes.UserConfigurationMap storage self,
uint256 reserveIndex,
bool usingAsCollateral
) internal {
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
self.data =
(self.data & ~(1 << (reserveIndex * 2 + 1))) |
(uint256(usingAsCollateral ? 1 : 0) << (reserveIndex * 2 + 1));
}
/**
* @dev Used to validate if a user has been using the reserve for borrowing or as collateral
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @return True if the user has been using a reserve for borrowing or as collateral, false otherwise
**/
function isUsingAsCollateralOrBorrowing(
DataTypes.UserConfigurationMap memory self,
uint256 reserveIndex
) internal pure returns (bool) {
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
return (self.data >> (reserveIndex * 2)) & 3 != 0;
}
/**
* @dev Used to validate if a user has been using the reserve for borrowing
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @return True if the user has been using a reserve for borrowing, false otherwise
**/
function isBorrowing(DataTypes.UserConfigurationMap memory self, uint256 reserveIndex)
internal
pure
returns (bool)
{
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
return (self.data >> (reserveIndex * 2)) & 1 != 0;
}
/**
* @dev Used to validate if a user has been using the reserve as collateral
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @return True if the user has been using a reserve as collateral, false otherwise
**/
function isUsingAsCollateral(DataTypes.UserConfigurationMap memory self, uint256 reserveIndex)
internal
pure
returns (bool)
{
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
return (self.data >> (reserveIndex * 2 + 1)) & 1 != 0;
}
/**
* @dev Used to validate if a user has been borrowing from any reserve
* @param self The configuration object
* @return True if the user has been borrowing any reserve, false otherwise
**/
function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
return self.data & BORROWING_MASK != 0;
}
/**
* @dev Used to validate if a user has not been using any reserve
* @param self The configuration object
* @return True if the user has been borrowing any reserve, false otherwise
**/
function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
return self.data == 0;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title Errors library
* @author Aave
* @notice Defines the error messages emitted by the different contracts of the Aave protocol
* @dev Error messages prefix glossary:
* - VL = ValidationLogic
* - MATH = Math libraries
* - CT = Common errors between tokens (AToken, VariableDebtToken and StableDebtToken)
* - AT = AToken
* - SDT = StableDebtToken
* - VDT = VariableDebtToken
* - LP = LendingPool
* - LPAPR = LendingPoolAddressesProviderRegistry
* - LPC = LendingPoolConfiguration
* - RL = ReserveLogic
* - LPCM = LendingPoolCollateralManager
* - P = Pausable
*/
library Errors {
//common errors
string public constant CALLER_NOT_POOL_ADMIN = '33'; // 'The caller must be the pool admin'
string public constant BORROW_ALLOWANCE_NOT_ENOUGH = '59'; // User borrows on behalf, but allowance are too small
//contract specific errors
string public constant VL_INVALID_AMOUNT = '1'; // 'Amount must be greater than 0'
string public constant VL_NO_ACTIVE_RESERVE = '2'; // 'Action requires an active reserve'
string public constant VL_RESERVE_FROZEN = '3'; // 'Action cannot be performed because the reserve is frozen'
string public constant VL_CURRENT_AVAILABLE_LIQUIDITY_NOT_ENOUGH = '4'; // 'The current liquidity is not enough'
string public constant VL_NOT_ENOUGH_AVAILABLE_USER_BALANCE = '5'; // 'User cannot withdraw more than the available balance'
string public constant VL_TRANSFER_NOT_ALLOWED = '6'; // 'Transfer cannot be allowed.'
string public constant VL_BORROWING_NOT_ENABLED = '7'; // 'Borrowing is not enabled'
string public constant VL_INVALID_INTEREST_RATE_MODE_SELECTED = '8'; // 'Invalid interest rate mode selected'
string public constant VL_COLLATERAL_BALANCE_IS_0 = '9'; // 'The collateral balance is 0'
string public constant VL_HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '10'; // 'Health factor is lesser than the liquidation threshold'
string public constant VL_COLLATERAL_CANNOT_COVER_NEW_BORROW = '11'; // 'There is not enough collateral to cover a new borrow'
string public constant VL_STABLE_BORROWING_NOT_ENABLED = '12'; // stable borrowing not enabled
string public constant VL_COLLATERAL_SAME_AS_BORROWING_CURRENCY = '13'; // collateral is (mostly) the same currency that is being borrowed
string public constant VL_AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '14'; // 'The requested amount is greater than the max loan size in stable rate mode
string public constant VL_NO_DEBT_OF_SELECTED_TYPE = '15'; // 'for repayment of stable debt, the user needs to have stable debt, otherwise, he needs to have variable debt'
string public constant VL_NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '16'; // 'To repay on behalf of an user an explicit amount to repay is needed'
string public constant VL_NO_STABLE_RATE_LOAN_IN_RESERVE = '17'; // 'User does not have a stable rate loan in progress on this reserve'
string public constant VL_NO_VARIABLE_RATE_LOAN_IN_RESERVE = '18'; // 'User does not have a variable rate loan in progress on this reserve'
string public constant VL_UNDERLYING_BALANCE_NOT_GREATER_THAN_0 = '19'; // 'The underlying balance needs to be greater than 0'
string public constant VL_DEPOSIT_ALREADY_IN_USE = '20'; // 'User deposit is already being used as collateral'
string public constant LP_NOT_ENOUGH_STABLE_BORROW_BALANCE = '21'; // 'User does not have any stable rate loan for this reserve'
string public constant LP_INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '22'; // 'Interest rate rebalance conditions were not met'
string public constant LP_LIQUIDATION_CALL_FAILED = '23'; // 'Liquidation call failed'
string public constant LP_NOT_ENOUGH_LIQUIDITY_TO_BORROW = '24'; // 'There is not enough liquidity available to borrow'
string public constant LP_REQUESTED_AMOUNT_TOO_SMALL = '25'; // 'The requested amount is too small for a FlashLoan.'
string public constant LP_INCONSISTENT_PROTOCOL_ACTUAL_BALANCE = '26'; // 'The actual balance of the protocol is inconsistent'
string public constant LP_CALLER_NOT_LENDING_POOL_CONFIGURATOR = '27'; // 'The caller of the function is not the lending pool configurator'
string public constant LP_INCONSISTENT_FLASHLOAN_PARAMS = '28';
string public constant CT_CALLER_MUST_BE_LENDING_POOL = '29'; // 'The caller of this function must be a lending pool'
string public constant CT_CANNOT_GIVE_ALLOWANCE_TO_HIMSELF = '30'; // 'User cannot give allowance to himself'
string public constant CT_TRANSFER_AMOUNT_NOT_GT_0 = '31'; // 'Transferred amount needs to be greater than zero'
string public constant RL_RESERVE_ALREADY_INITIALIZED = '32'; // 'Reserve has already been initialized'
string public constant LPC_RESERVE_LIQUIDITY_NOT_0 = '34'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_ATOKEN_POOL_ADDRESS = '35'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_STABLE_DEBT_TOKEN_POOL_ADDRESS = '36'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_POOL_ADDRESS = '37'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_STABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '38'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '39'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_ADDRESSES_PROVIDER_ID = '40'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_CONFIGURATION = '75'; // 'Invalid risk parameters for the reserve'
string public constant LPC_CALLER_NOT_EMERGENCY_ADMIN = '76'; // 'The caller must be the emergency admin'
string public constant LPAPR_PROVIDER_NOT_REGISTERED = '41'; // 'Provider is not registered'
string public constant LPCM_HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '42'; // 'Health factor is not below the threshold'
string public constant LPCM_COLLATERAL_CANNOT_BE_LIQUIDATED = '43'; // 'The collateral chosen cannot be liquidated'
string public constant LPCM_SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '44'; // 'User did not borrow the specified currency'
string public constant LPCM_NOT_ENOUGH_LIQUIDITY_TO_LIQUIDATE = '45'; // "There isn't enough liquidity available to liquidate"
string public constant LPCM_NO_ERRORS = '46'; // 'No errors'
string public constant LP_INVALID_FLASHLOAN_MODE = '47'; //Invalid flashloan mode selected
string public constant MATH_MULTIPLICATION_OVERFLOW = '48';
string public constant MATH_ADDITION_OVERFLOW = '49';
string public constant MATH_DIVISION_BY_ZERO = '50';
string public constant RL_LIQUIDITY_INDEX_OVERFLOW = '51'; // Liquidity index overflows uint128
string public constant RL_VARIABLE_BORROW_INDEX_OVERFLOW = '52'; // Variable borrow index overflows uint128
string public constant RL_LIQUIDITY_RATE_OVERFLOW = '53'; // Liquidity rate overflows uint128
string public constant RL_VARIABLE_BORROW_RATE_OVERFLOW = '54'; // Variable borrow rate overflows uint128
string public constant RL_STABLE_BORROW_RATE_OVERFLOW = '55'; // Stable borrow rate overflows uint128
string public constant CT_INVALID_MINT_AMOUNT = '56'; //invalid amount to mint
string public constant LP_FAILED_REPAY_WITH_COLLATERAL = '57';
string public constant CT_INVALID_BURN_AMOUNT = '58'; //invalid amount to burn
string public constant LP_FAILED_COLLATERAL_SWAP = '60';
string public constant LP_INVALID_EQUAL_ASSETS_TO_SWAP = '61';
string public constant LP_REENTRANCY_NOT_ALLOWED = '62';
string public constant LP_CALLER_MUST_BE_AN_ATOKEN = '63';
string public constant LP_IS_PAUSED = '64'; // 'Pool is paused'
string public constant LP_NO_MORE_RESERVES_ALLOWED = '65';
string public constant LP_INVALID_FLASH_LOAN_EXECUTOR_RETURN = '66';
string public constant RC_INVALID_LTV = '67';
string public constant RC_INVALID_LIQ_THRESHOLD = '68';
string public constant RC_INVALID_LIQ_BONUS = '69';
string public constant RC_INVALID_DECIMALS = '70';
string public constant RC_INVALID_RESERVE_FACTOR = '71';
string public constant LPAPR_INVALID_ADDRESSES_PROVIDER_ID = '72';
string public constant VL_INCONSISTENT_FLASHLOAN_PARAMS = '73';
string public constant LP_INCONSISTENT_PARAMS_LENGTH = '74';
string public constant UL_INVALID_INDEX = '77';
string public constant LP_NOT_CONTRACT = '78';
string public constant SDT_STABLE_DEBT_OVERFLOW = '79';
string public constant SDT_BURN_EXCEEDS_BALANCE = '80';
enum CollateralManagerErrors {
NO_ERROR,
NO_COLLATERAL_AVAILABLE,
COLLATERAL_CANNOT_BE_LIQUIDATED,
CURRRENCY_NOT_BORROWED,
HEALTH_FACTOR_ABOVE_THRESHOLD,
NOT_ENOUGH_LIQUIDITY,
NO_ACTIVE_RESERVE,
HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD,
INVALID_EQUAL_ASSETS_TO_SWAP,
FROZEN_RESERVE
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title Helpers library
* @author Aave
*/
library Helpers {
/**
* @dev Fetches the user current stable and variable debt balances
* @param user The user address
* @param reserve The reserve data object
* @return The stable and variable debt balance
**/
function getUserCurrentDebt(address user, DataTypes.ReserveData storage reserve)
internal
view
returns (uint256, uint256)
{
return (
IERC20(reserve.stableDebtTokenAddress).balanceOf(user),
IERC20(reserve.variableDebtTokenAddress).balanceOf(user)
);
}
function getUserCurrentDebtMemory(address user, DataTypes.ReserveData memory reserve)
internal
view
returns (uint256, uint256)
{
return (
IERC20(reserve.stableDebtTokenAddress).balanceOf(user),
IERC20(reserve.variableDebtTokenAddress).balanceOf(user)
);
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
library DataTypes {
// refer to the whitepaper, section 1.1 basic concepts for a formal description of these properties.
struct ReserveData {
//stores the reserve configuration
ReserveConfigurationMap configuration;
//the liquidity index. Expressed in ray
uint128 liquidityIndex;
//variable borrow index. Expressed in ray
uint128 variableBorrowIndex;
//the current supply rate. Expressed in ray
uint128 currentLiquidityRate;
//the current variable borrow rate. Expressed in ray
uint128 currentVariableBorrowRate;
//the current stable borrow rate. Expressed in ray
uint128 currentStableBorrowRate;
uint40 lastUpdateTimestamp;
//tokens addresses
address aTokenAddress;
address stableDebtTokenAddress;
address variableDebtTokenAddress;
//address of the interest rate strategy
address interestRateStrategyAddress;
//the id of the reserve. Represents the position in the list of the active reserves
uint8 id;
}
struct ReserveConfigurationMap {
//bit 0-15: LTV
//bit 16-31: Liq. threshold
//bit 32-47: Liq. bonus
//bit 48-55: Decimals
//bit 56: Reserve is active
//bit 57: reserve is frozen
//bit 58: borrowing is enabled
//bit 59: stable rate borrowing enabled
//bit 60-63: reserved
//bit 64-79: reserve factor
uint256 data;
}
struct UserConfigurationMap {
uint256 data;
}
enum InterestRateMode {NONE, STABLE, VARIABLE}
}