Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

import {ERC1155Items} from "@0xsequence/contracts-library/tokens/ERC1155/presets/items/ERC1155Items.sol";
import {IERC1155ItemsFactory} from
    "@0xsequence/contracts-library/tokens/ERC1155/presets/items/IERC1155ItemsFactory.sol";
import {SequenceProxyFactory} from "@0xsequence/contracts-library/proxies/SequenceProxyFactory.sol";

/**
 * Deployer of ERC-1155 Items proxies.
 */
contract ERC1155ItemsFactory is IERC1155ItemsFactory, SequenceProxyFactory {
    /**
     * Creates an ERC-1155 Items Factory.
     * @param factoryOwner The owner of the ERC-1155 Items Factory
     */
    constructor(address factoryOwner) {
        ERC1155Items impl = new ERC1155Items();
        SequenceProxyFactory._initialize(address(impl), factoryOwner);
    }

    /**
     * Creates an ERC-1155 Items proxy.
     * @param proxyOwner The owner of the ERC-1155 Items proxy
     * @param tokenOwner The owner of the ERC-1155 Items implementation
     * @param name The name of the ERC-1155 Items proxy
     * @param baseURI The base URI of the ERC-1155 Items proxy
     * @param contractURI The contract URI of the ERC-1155 Items proxy
     * @param royaltyReceiver Address of who should be sent the royalty payment
     * @param royaltyFeeNumerator The royalty fee numerator in basis points (e.g. 15% would be 1500)
     * @return proxyAddr The address of the ERC-1155 Items Proxy
     */
    function deploy(
        address proxyOwner,
        address tokenOwner,
        string memory name,
        string memory baseURI,
        string memory contractURI,
        address royaltyReceiver,
        uint96 royaltyFeeNumerator
    )
        external
        returns (address proxyAddr)
    {
        bytes32 salt = keccak256(abi.encode(tokenOwner, name, baseURI, contractURI, royaltyReceiver, royaltyFeeNumerator));
        proxyAddr = _createProxy(salt, proxyOwner, "");
        ERC1155Items(proxyAddr).initialize(tokenOwner, name, baseURI, contractURI, royaltyReceiver, royaltyFeeNumerator);
        emit ERC1155ItemsDeployed(proxyAddr);
        return proxyAddr;
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import './IERC165.sol';


interface IERC1155 is IERC165 {

  /****************************************|
  |                 Events                 |
  |_______________________________________*/

  /**
   * @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred, including zero amount transfers as well as minting or burning
   *   Operator MUST be msg.sender
   *   When minting/creating tokens, the `_from` field MUST be set to `0x0`
   *   When burning/destroying tokens, the `_to` field MUST be set to `0x0`
   *   The total amount transferred from address 0x0 minus the total amount transferred to 0x0 may be used by clients and exchanges to be added to the "circulating supply" for a given token ID
   *   To broadcast the existence of a token ID with no initial balance, the contract SHOULD emit the TransferSingle event from `0x0` to `0x0`, with the token creator as `_operator`, and a `_amount` of 0
   */
  event TransferSingle(address indexed _operator, address indexed _from, address indexed _to, uint256 _id, uint256 _amount);

  /**
   * @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred, including zero amount transfers as well as minting or burning
   *   Operator MUST be msg.sender
   *   When minting/creating tokens, the `_from` field MUST be set to `0x0`
   *   When burning/destroying tokens, the `_to` field MUST be set to `0x0`
   *   The total amount transferred from address 0x0 minus the total amount transferred to 0x0 may be used by clients and exchanges to be added to the "circulating supply" for a given token ID
   *   To broadcast the existence of multiple token IDs with no initial balance, this SHOULD emit the TransferBatch event from `0x0` to `0x0`, with the token creator as `_operator`, and a `_amount` of 0
   */
  event TransferBatch(address indexed _operator, address indexed _from, address indexed _to, uint256[] _ids, uint256[] _amounts);

  /**
   * @dev MUST emit when an approval is updated
   */
  event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);


  /****************************************|
  |                Functions               |
  |_______________________________________*/

  /**
    * @notice Transfers amount of an _id from the _from address to the _to address specified
    * @dev MUST emit TransferSingle event on success
    * Caller must be approved to manage the _from account's tokens (see isApprovedForAll)
    * MUST throw if `_to` is the zero address
    * MUST throw if balance of sender for token `_id` is lower than the `_amount` sent
    * MUST throw on any other error
    * When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0). If so, it MUST call `onERC1155Received` on `_to` and revert if the return amount is not `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
    * @param _from    Source address
    * @param _to      Target address
    * @param _id      ID of the token type
    * @param _amount  Transfered amount
    * @param _data    Additional data with no specified format, sent in call to `_to`
    */
  function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount, bytes calldata _data) external;

  /**
    * @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
    * @dev MUST emit TransferBatch event on success
    * Caller must be approved to manage the _from account's tokens (see isApprovedForAll)
    * MUST throw if `_to` is the zero address
    * MUST throw if length of `_ids` is not the same as length of `_amounts`
    * MUST throw if any of the balance of sender for token `_ids` is lower than the respective `_amounts` sent
    * MUST throw on any other error
    * When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0). If so, it MUST call `onERC1155BatchReceived` on `_to` and revert if the return amount is not `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
    * Transfers and events MUST occur in the array order they were submitted (_ids[0] before _ids[1], etc)
    * @param _from     Source addresses
    * @param _to       Target addresses
    * @param _ids      IDs of each token type
    * @param _amounts  Transfer amounts per token type
    * @param _data     Additional data with no specified format, sent in call to `_to`
  */
  function safeBatchTransferFrom(address _from, address _to, uint256[] calldata _ids, uint256[] calldata _amounts, bytes calldata _data) external;

  /**
   * @notice Get the balance of an account's Tokens
   * @param _owner  The address of the token holder
   * @param _id     ID of the Token
   * @return        The _owner's balance of the Token type requested
   */
  function balanceOf(address _owner, uint256 _id) external view returns (uint256);

  /**
   * @notice Get the balance of multiple account/token pairs
   * @param _owners The addresses of the token holders
   * @param _ids    ID of the Tokens
   * @return        The _owner's balance of the Token types requested (i.e. balance for each (owner, id) pair)
   */
  function balanceOfBatch(address[] calldata _owners, uint256[] calldata _ids) external view returns (uint256[] memory);

  /**
   * @notice Enable or disable approval for a third party ("operator") to manage all of caller's tokens
   * @dev MUST emit the ApprovalForAll event on success
   * @param _operator  Address to add to the set of authorized operators
   * @param _approved  True if the operator is approved, false to revoke approval
   */
  function setApprovalForAll(address _operator, bool _approved) external;

  /**
   * @notice Queries the approval status of an operator for a given owner
   * @param _owner     The owner of the Tokens
   * @param _operator  Address of authorized operator
   * @return isOperator True if the operator is approved, false if not
   */
  function isApprovedForAll(address _owner, address _operator) external view returns (bool isOperator);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;


interface IERC1155Metadata {

  event URI(string _uri, uint256 indexed _id);

  /****************************************|
  |                Functions               |
  |_______________________________________*/

  /**
   * @notice A distinct Uniform Resource Identifier (URI) for a given token.
   * @dev URIs are defined in RFC 3986.
   *      URIs are assumed to be deterministically generated based on token ID
   *      Token IDs are assumed to be represented in their hex format in URIs
   * @return URI string
   */
  function uri(uint256 _id) external view returns (string memory);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

/**
 * @dev ERC-1155 interface for accepting safe transfers.
 */
interface IERC1155TokenReceiver {

  /**
   * @notice Handle the receipt of a single ERC1155 token type
   * @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeTransferFrom` after the balance has been updated
   * This function MAY throw to revert and reject the transfer
   * Return of other amount than the magic value MUST result in the transaction being reverted
   * Note: The token contract address is always the message sender
   * @param _operator  The address which called the `safeTransferFrom` function
   * @param _from      The address which previously owned the token
   * @param _id        The id of the token being transferred
   * @param _amount    The amount of tokens being transferred
   * @param _data      Additional data with no specified format
   * @return           `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
   */
  function onERC1155Received(address _operator, address _from, uint256 _id, uint256 _amount, bytes calldata _data) external returns(bytes4);

  /**
   * @notice Handle the receipt of multiple ERC1155 token types
   * @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeBatchTransferFrom` after the balances have been updated
   * This function MAY throw to revert and reject the transfer
   * Return of other amount than the magic value WILL result in the transaction being reverted
   * Note: The token contract address is always the message sender
   * @param _operator  The address which called the `safeBatchTransferFrom` function
   * @param _from      The address which previously owned the token
   * @param _ids       An array containing ids of each token being transferred
   * @param _amounts   An array containing amounts of each token being transferred
   * @param _data      Additional data with no specified format
   * @return           `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
   */
  function onERC1155BatchReceived(address _operator, address _from, uint256[] calldata _ids, uint256[] calldata _amounts, bytes calldata _data) external returns(bytes4);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;


/**
 * @title ERC165
 * @dev https://github.com/ethereum/EIPs/blob/master/EIPS/eip-165.md
 */
interface IERC165 {

    /**
     * @notice Query if a contract implements an interface
     * @dev Interface identification is specified in ERC-165. This function
     * uses less than 30,000 gas
     * @param _interfaceId The interface identifier, as specified in ERC-165
     */
    function supportsInterface(bytes4 _interfaceId)
    external
    view
    returns (bool);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

import "../../interfaces/IERC1155TokenReceiver.sol";
import "../../interfaces/IERC1155.sol";
import "../../utils/Address.sol";
import "../../utils/ERC165.sol";

/**
 * @dev Implementation of Multi-Token Standard contract
 */
contract ERC1155 is IERC1155, ERC165 {
  using Address for address;

  /***********************************|
  |        Variables and Events       |
  |__________________________________*/

  // onReceive function signatures
  bytes4 constant internal ERC1155_RECEIVED_VALUE = 0xf23a6e61;
  bytes4 constant internal ERC1155_BATCH_RECEIVED_VALUE = 0xbc197c81;

  // Objects balances
  mapping (address => mapping(uint256 => uint256)) internal balances;

  // Operator Functions
  mapping (address => mapping(address => bool)) internal operators;


  /***********************************|
  |     Public Transfer Functions     |
  |__________________________________*/

  /**
   * @notice Transfers amount amount of an _id from the _from address to the _to address specified
   * @param _from    Source address
   * @param _to      Target address
   * @param _id      ID of the token type
   * @param _amount  Transfered amount
   * @param _data    Additional data with no specified format, sent in call to `_to`
   */
  function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount, bytes memory _data)
    public virtual override
  {
    require((msg.sender == _from) || isApprovedForAll(_from, msg.sender), "ERC1155#safeTransferFrom: INVALID_OPERATOR");
    require(_to != address(0),"ERC1155#safeTransferFrom: INVALID_RECIPIENT");

    _safeTransferFrom(_from, _to, _id, _amount);
    _callonERC1155Received(_from, _to, _id, _amount, gasleft(), _data);
  }

  /**
   * @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
   * @param _from     Source addresses
   * @param _to       Target addresses
   * @param _ids      IDs of each token type
   * @param _amounts  Transfer amounts per token type
   * @param _data     Additional data with no specified format, sent in call to `_to`
   */
  function safeBatchTransferFrom(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
    public virtual override
  {
    // Requirements
    require((msg.sender == _from) || isApprovedForAll(_from, msg.sender), "ERC1155#safeBatchTransferFrom: INVALID_OPERATOR");
    require(_to != address(0), "ERC1155#safeBatchTransferFrom: INVALID_RECIPIENT");

    _safeBatchTransferFrom(_from, _to, _ids, _amounts);
    _callonERC1155BatchReceived(_from, _to, _ids, _amounts, gasleft(), _data);
  }


  /***********************************|
  |    Internal Transfer Functions    |
  |__________________________________*/

  /**
   * @notice Transfers amount amount of an _id from the _from address to the _to address specified
   * @param _from    Source address
   * @param _to      Target address
   * @param _id      ID of the token type
   * @param _amount  Transfered amount
   */
  function _safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount)
    internal virtual
  {
    // Update balances
    balances[_from][_id] -= _amount;
    balances[_to][_id] += _amount;

    // Emit event
    emit TransferSingle(msg.sender, _from, _to, _id, _amount);
  }

  /**
   * @notice Verifies if receiver is contract and if so, calls (_to).onERC1155Received(...)
   */
  function _callonERC1155Received(address _from, address _to, uint256 _id, uint256 _amount, uint256 _gasLimit, bytes memory _data)
    internal virtual
  {
    // Check if recipient is contract
    if (_to.isContract()) {
      bytes4 retval = IERC1155TokenReceiver(_to).onERC1155Received{gas: _gasLimit}(msg.sender, _from, _id, _amount, _data);
      require(retval == ERC1155_RECEIVED_VALUE, "ERC1155#_callonERC1155Received: INVALID_ON_RECEIVE_MESSAGE");
    }
  }

  /**
   * @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
   * @param _from     Source addresses
   * @param _to       Target addresses
   * @param _ids      IDs of each token type
   * @param _amounts  Transfer amounts per token type
   */
  function _safeBatchTransferFrom(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts)
    internal virtual
  {
    require(_ids.length == _amounts.length, "ERC1155#_safeBatchTransferFrom: INVALID_ARRAYS_LENGTH");

    // Number of transfer to execute
    uint256 nTransfer = _ids.length;

    // Executing all transfers
    for (uint256 i = 0; i < nTransfer; i++) {
      // Update storage balance of previous bin
      balances[_from][_ids[i]] -= _amounts[i];
      balances[_to][_ids[i]] += _amounts[i];
    }

    // Emit event
    emit TransferBatch(msg.sender, _from, _to, _ids, _amounts);
  }

  /**
   * @notice Verifies if receiver is contract and if so, calls (_to).onERC1155BatchReceived(...)
   */
  function _callonERC1155BatchReceived(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, uint256 _gasLimit, bytes memory _data)
    internal virtual
  {
    // Pass data if recipient is contract
    if (_to.isContract()) {
      bytes4 retval = IERC1155TokenReceiver(_to).onERC1155BatchReceived{gas: _gasLimit}(msg.sender, _from, _ids, _amounts, _data);
      require(retval == ERC1155_BATCH_RECEIVED_VALUE, "ERC1155#_callonERC1155BatchReceived: INVALID_ON_RECEIVE_MESSAGE");
    }
  }


  /***********************************|
  |         Operator Functions        |
  |__________________________________*/

  /**
   * @notice Enable or disable approval for a third party ("operator") to manage all of caller's tokens
   * @param _operator  Address to add to the set of authorized operators
   * @param _approved  True if the operator is approved, false to revoke approval
   */
  function setApprovalForAll(address _operator, bool _approved)
    external virtual override
  {
    // Update operator status
    operators[msg.sender][_operator] = _approved;
    emit ApprovalForAll(msg.sender, _operator, _approved);
  }

  /**
   * @notice Queries the approval status of an operator for a given owner
   * @param _owner     The owner of the Tokens
   * @param _operator  Address of authorized operator
   * @return isOperator True if the operator is approved, false if not
   */
  function isApprovedForAll(address _owner, address _operator)
    public view virtual override returns (bool isOperator)
  {
    return operators[_owner][_operator];
  }


  /***********************************|
  |         Balance Functions         |
  |__________________________________*/

  /**
   * @notice Get the balance of an account's Tokens
   * @param _owner  The address of the token holder
   * @param _id     ID of the Token
   * @return The _owner's balance of the Token type requested
   */
  function balanceOf(address _owner, uint256 _id)
    public view virtual override returns (uint256)
  {
    return balances[_owner][_id];
  }

  /**
   * @notice Get the balance of multiple account/token pairs
   * @param _owners The addresses of the token holders
   * @param _ids    ID of the Tokens
   * @return        The _owner's balance of the Token types requested (i.e. balance for each (owner, id) pair)
   */
  function balanceOfBatch(address[] memory _owners, uint256[] memory _ids)
    public view virtual override returns (uint256[] memory)
  {
    require(_owners.length == _ids.length, "ERC1155#balanceOfBatch: INVALID_ARRAY_LENGTH");

    // Variables
    uint256[] memory batchBalances = new uint256[](_owners.length);

    // Iterate over each owner and token ID
    for (uint256 i = 0; i < _owners.length; i++) {
      batchBalances[i] = balances[_owners[i]][_ids[i]];
    }

    return batchBalances;
  }


  /***********************************|
  |          ERC165 Functions         |
  |__________________________________*/

  /**
   * @notice Query if a contract implements an interface
   * @param _interfaceID  The interface identifier, as specified in ERC-165
   * @return `true` if the contract implements `_interfaceID` and
   */
  function supportsInterface(bytes4 _interfaceID) public view virtual override(ERC165, IERC165) returns (bool) {
    if (_interfaceID == type(IERC1155).interfaceId) {
      return true;
    }
    return super.supportsInterface(_interfaceID);
  }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import '../../interfaces/IERC1155Metadata.sol';
import '../../utils/ERC165.sol';

/**
 * @notice Contract that handles metadata related methods.
 * @dev Methods assume a deterministic generation of URI based on token IDs.
 *      Methods also assume that URI uses hex representation of token IDs.
 */
contract ERC1155Metadata is IERC1155Metadata, ERC165 {
  // URI's default URI prefix
  string public baseURI;
  string public name;

  // set the initial name and base URI
  constructor(string memory _name, string memory _baseURI) {
    name = _name;
    baseURI = _baseURI;
  }

  /***********************************|
  |     Metadata Public Functions     |
  |__________________________________*/

  /**
   * @notice A distinct Uniform Resource Identifier (URI) for a given token.
   * @dev URIs are defined in RFC 3986.
   *      URIs are assumed to be deterministically generated based on token ID
   * @return URI string
   */
  function uri(uint256 _id) public view virtual override returns (string memory) {
    return string(abi.encodePacked(baseURI, _uint2str(_id), ".json"));
  }


  /***********************************|
  |    Metadata Internal Functions    |
  |__________________________________*/

  /**
   * @notice Will emit default URI log event for corresponding token _id
   * @param _tokenIDs Array of IDs of tokens to log default URI
   */
  function _logURIs(uint256[] memory _tokenIDs) internal virtual {
    string memory baseURL = baseURI;
    string memory tokenURI;

    for (uint256 i = 0; i < _tokenIDs.length; i++) {
      tokenURI = string(abi.encodePacked(baseURL, _uint2str(_tokenIDs[i]), ".json"));
      emit URI(tokenURI, _tokenIDs[i]);
    }
  }

  /**
   * @notice Will update the base URL of token's URI
   * @param _newBaseMetadataURI New base URL of token's URI
   */
  function _setBaseMetadataURI(string memory _newBaseMetadataURI) internal {
    baseURI = _newBaseMetadataURI;
  }

  /**
   * @notice Will update the name of the contract
   * @param _newName New contract name
   */
  function _setContractName(string memory _newName) internal {
    name = _newName;
  }

  /**
   * @notice Query if a contract implements an interface
   * @param _interfaceID  The interface identifier, as specified in ERC-165
   * @return `true` if the contract implements `_interfaceID` and
   */
  function supportsInterface(bytes4 _interfaceID) public view virtual override returns (bool) {
    if (_interfaceID == type(IERC1155Metadata).interfaceId) {
      return true;
    }
    return super.supportsInterface(_interfaceID);
  }

  /***********************************|
  |    Utility Internal Functions     |
  |__________________________________*/

  function _uint2str(uint _i) internal pure returns (string memory _uintAsString) {
    if (_i == 0) {
      return '0';
    }
    uint j = _i;
    uint len;
    while (j != 0) {
      len++;
      j /= 10;
    }
    bytes memory bstr = new bytes(len);
    uint k = len;
    while (_i != 0) {
      k = k - 1;
      uint8 temp = (48 + uint8(_i - (_i / 10) * 10));
      bytes1 b1 = bytes1(temp);
      bstr[k] = b1;
      _i /= 10;
    }
    return string(bstr);
  }
}

pragma solidity ^0.8.0;

/**
 * Utility library of inline functions on addresses
 */
library Address {

  // Default hash for EOA accounts returned by extcodehash
  bytes32 constant internal ACCOUNT_HASH = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract.
   * @param _address address of the account to check
   * @return Whether the target address is a contract
   */
  function isContract(address _address) internal view returns (bool) {
    bytes32 codehash;

    // Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address or if it has a non-zero code hash or account hash
    assembly { codehash := extcodehash(_address) }
    return (codehash != 0x0 && codehash != ACCOUNT_HASH);
  }
}

pragma solidity ^0.8.0;
import "../interfaces/IERC165.sol";

abstract contract ERC165 is IERC165 {
  /**
   * @notice Query if a contract implements an interface
   * @param _interfaceID The interface identifier, as specified in ERC-165
   * @return `true` if the contract implements `_interfaceID`
   */
  function supportsInterface(bytes4 _interfaceID) public view virtual override returns (bool) {
    return _interfaceID == this.supportsInterface.selector;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        _roleMembers[role].remove(account);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1967.sol)

pragma solidity ^0.8.0;

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 *
 * _Available since v4.8.3._
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 *
 * _Available since v4.5._
 */
interface IERC2981 is IERC165 {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(
        uint256 tokenId,
        uint256 salePrice
    ) external view returns (address receiver, uint256 royaltyAmount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)

pragma solidity ^0.8.0;

/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/ERC1967/ERC1967Upgrade.sol)

pragma solidity ^0.8.2;

import "../beacon/IBeacon.sol";
import "../../interfaces/IERC1967.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";

/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 */
abstract contract ERC1967Upgrade is IERC1967 {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }

    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data, bool forceCall) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }

    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)

pragma solidity ^0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overridden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.0;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/UpgradeableBeacon.sol)

pragma solidity ^0.8.0;

import "./IBeacon.sol";
import "../../access/Ownable.sol";
import "../../utils/Address.sol";

/**
 * @dev This contract is used in conjunction with one or more instances of {BeaconProxy} to determine their
 * implementation contract, which is where they will delegate all function calls.
 *
 * An owner is able to change the implementation the beacon points to, thus upgrading the proxies that use this beacon.
 */
contract UpgradeableBeacon is IBeacon, Ownable {
    address private _implementation;

    /**
     * @dev Emitted when the implementation returned by the beacon is changed.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Sets the address of the initial implementation, and the deployer account as the owner who can upgrade the
     * beacon.
     */
    constructor(address implementation_) {
        _setImplementation(implementation_);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function implementation() public view virtual override returns (address) {
        return _implementation;
    }

    /**
     * @dev Upgrades the beacon to a new implementation.
     *
     * Emits an {Upgraded} event.
     *
     * Requirements:
     *
     * - msg.sender must be the owner of the contract.
     * - `newImplementation` must be a contract.
     */
    function upgradeTo(address newImplementation) public virtual onlyOwner {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Sets the implementation contract address for this beacon
     *
     * Requirements:
     *
     * - `newImplementation` must be a contract.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableBeacon: implementation is not a contract");
        _implementation = newImplementation;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/common/ERC2981.sol)

pragma solidity ^0.8.0;

import "../../interfaces/IERC2981.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
 *
 * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
 * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
 *
 * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
 * fee is specified in basis points by default.
 *
 * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
 * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
 * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
 *
 * _Available since v4.5._
 */
abstract contract ERC2981 is IERC2981, ERC165 {
    struct RoyaltyInfo {
        address receiver;
        uint96 royaltyFraction;
    }

    RoyaltyInfo private _defaultRoyaltyInfo;
    mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @inheritdoc IERC2981
     */
    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual override returns (address, uint256) {
        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];

        if (royalty.receiver == address(0)) {
            royalty = _defaultRoyaltyInfo;
        }

        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();

        return (royalty.receiver, royaltyAmount);
    }

    /**
     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
     * override.
     */
    function _feeDenominator() internal pure virtual returns (uint96) {
        return 10000;
    }

    /**
     * @dev Sets the royalty information that all ids in this contract will default to.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: invalid receiver");

        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Removes default royalty information.
     */
    function _deleteDefaultRoyalty() internal virtual {
        delete _defaultRoyaltyInfo;
    }

    /**
     * @dev Sets the royalty information for a specific token id, overriding the global default.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: Invalid parameters");

        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Resets royalty information for the token id back to the global default.
     */
    function _resetTokenRoyalty(uint256 tokenId) internal virtual {
        delete _tokenRoyaltyInfo[tokenId];
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Create2.sol)

pragma solidity ^0.8.0;

/**
 * @dev Helper to make usage of the `CREATE2` EVM opcode easier and safer.
 * `CREATE2` can be used to compute in advance the address where a smart
 * contract will be deployed, which allows for interesting new mechanisms known
 * as 'counterfactual interactions'.
 *
 * See the https://eips.ethereum.org/EIPS/eip-1014#motivation[EIP] for more
 * information.
 */
library Create2 {
    /**
     * @dev Deploys a contract using `CREATE2`. The address where the contract
     * will be deployed can be known in advance via {computeAddress}.
     *
     * The bytecode for a contract can be obtained from Solidity with
     * `type(contractName).creationCode`.
     *
     * Requirements:
     *
     * - `bytecode` must not be empty.
     * - `salt` must have not been used for `bytecode` already.
     * - the factory must have a balance of at least `amount`.
     * - if `amount` is non-zero, `bytecode` must have a `payable` constructor.
     */
    function deploy(uint256 amount, bytes32 salt, bytes memory bytecode) internal returns (address addr) {
        require(address(this).balance >= amount, "Create2: insufficient balance");
        require(bytecode.length != 0, "Create2: bytecode length is zero");
        /// @solidity memory-safe-assembly
        assembly {
            addr := create2(amount, add(bytecode, 0x20), mload(bytecode), salt)
        }
        require(addr != address(0), "Create2: Failed on deploy");
    }

    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy}. Any change in the
     * `bytecodeHash` or `salt` will result in a new destination address.
     */
    function computeAddress(bytes32 salt, bytes32 bytecodeHash) internal view returns (address) {
        return computeAddress(salt, bytecodeHash, address(this));
    }

    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy} from a contract located at
     * `deployer`. If `deployer` is this contract's address, returns the same value as {computeAddress}.
     */
    function computeAddress(bytes32 salt, bytes32 bytecodeHash, address deployer) internal pure returns (address addr) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40) // Get free memory pointer

            // |                   | ↓ ptr ...  ↓ ptr + 0x0B (start) ...  ↓ ptr + 0x20 ...  ↓ ptr + 0x40 ...   |
            // |-------------------|---------------------------------------------------------------------------|
            // | bytecodeHash      |                                                        CCCCCCCCCCCCC...CC |
            // | salt              |                                      BBBBBBBBBBBBB...BB                   |
            // | deployer          | 000000...0000AAAAAAAAAAAAAAAAAAA...AA                                     |
            // | 0xFF              |            FF                                                             |
            // |-------------------|---------------------------------------------------------------------------|
            // | memory            | 000000...00FFAAAAAAAAAAAAAAAAAAA...AABBBBBBBBBBBBB...BBCCCCCCCCCCCCC...CC |
            // | keccak(start, 85) |            ↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑ |

            mstore(add(ptr, 0x40), bytecodeHash)
            mstore(add(ptr, 0x20), salt)
            mstore(ptr, deployer) // Right-aligned with 12 preceding garbage bytes
            let start := add(ptr, 0x0b) // The hashed data starts at the final garbage byte which we will set to 0xff
            mstore8(start, 0xff)
            addr := keccak256(start, 85)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

import {
    TransparentUpgradeableBeaconProxy,
    ITransparentUpgradeableBeaconProxy
} from "./TransparentUpgradeableBeaconProxy.sol";

import {Create2} from "@openzeppelin/contracts/utils/Create2.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {UpgradeableBeacon} from "@openzeppelin/contracts/proxy/beacon/UpgradeableBeacon.sol";

/**
 * An proxy factory that deploys upgradeable beacon proxies.
 * @dev The factory owner is able to upgrade the beacon implementation.
 * @dev Proxy deployers are able to override the beacon reference with their own.
 */
abstract contract SequenceProxyFactory is Ownable {
    UpgradeableBeacon public beacon;

    /**
     * Initialize a Sequence Proxy Factory.
     * @param implementation The initial beacon implementation.
     * @param factoryOwner The owner of the factory.
     */
    function _initialize(address implementation, address factoryOwner) internal {
        beacon = new UpgradeableBeacon(implementation);
        Ownable._transferOwnership(factoryOwner);
    }

    /**
     * Deploys and initializes a new proxy instance.
     * @param _salt The deployment salt.
     * @param _proxyOwner The owner of the proxy.
     * @param _data The initialization data.
     * @return proxyAddress The address of the deployed proxy.
     */
    function _createProxy(bytes32 _salt, address _proxyOwner, bytes memory _data) internal returns (address proxyAddress) {
        bytes32 saltedHash = keccak256(abi.encodePacked(_salt, _proxyOwner, address(beacon), _data));
        bytes memory bytecode = type(TransparentUpgradeableBeaconProxy).creationCode;

        proxyAddress = Create2.deploy(0, saltedHash, bytecode);
        ITransparentUpgradeableBeaconProxy(payable(proxyAddress)).initialize(_proxyOwner, address(beacon), _data);
    }

    /**
     * Computes the address of a proxy instance.
     * @param _salt The deployment salt.
     * @param _proxyOwner The owner of the proxy.
     * @return proxy The expected address of the deployed proxy.
     */
    function _computeProxyAddress(bytes32 _salt, address _proxyOwner, bytes memory _data) internal view returns (address) {
        bytes32 saltedHash = keccak256(abi.encodePacked(_salt, _proxyOwner, address(beacon), _data));
        bytes32 bytecodeHash = keccak256(type(TransparentUpgradeableBeaconProxy).creationCode);

        return Create2.computeAddress(saltedHash, bytecodeHash);
    }

    /**
     * Upgrades the beacon implementation.
     * @param implementation The new beacon implementation.
     */
    function upgradeBeacon(address implementation) public onlyOwner {
        beacon.upgradeTo(implementation);
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

import {BeaconProxy, Proxy} from "./openzeppelin/BeaconProxy.sol";
import {TransparentUpgradeableProxy, ERC1967Proxy} from "./openzeppelin/TransparentUpgradeableProxy.sol";

interface ITransparentUpgradeableBeaconProxy {
    function initialize(address admin, address beacon, bytes memory data) external;
}

error InvalidInitialization();

/**
 * @dev As the underlying proxy implementation (TransparentUpgradeableProxy) allows the admin to call the implementation,
 * care must be taken to avoid proxy selector collisions. Implementation selectors must not conflict with the proxy selectors.
 * See https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector clashing].
 * The proxy selectors are:
 * - 0xcf7a1d77: initialize
 * - 0x3659cfe6: upgradeTo (from TransparentUpgradeableProxy)
 * - 0x4f1ef286: upgradeToAndCall (from TransparentUpgradeableProxy)
 * - 0x8f283970: changeAdmin (from TransparentUpgradeableProxy)
 * - 0xf851a440: admin (from TransparentUpgradeableProxy)
 * - 0x5c60da1b: implementation (from TransparentUpgradeableProxy)
 */
contract TransparentUpgradeableBeaconProxy is TransparentUpgradeableProxy, BeaconProxy {
    /**
     * Decode the initialization data from the msg.data and call the initialize function.
     */
    function _dispatchInitialize() private returns (bytes memory) {
        _requireZeroValue();

        (address admin, address beacon, bytes memory data) = abi.decode(msg.data[4:], (address, address, bytes));
        initialize(admin, beacon, data);

        return "";
    }

    function initialize(address admin, address beacon, bytes memory data) internal {
        if (_admin() != address(0)) {
            // Redundant call. This function can only be called when the admin is not set.
            revert InvalidInitialization();
        }
        _changeAdmin(admin);
        _upgradeBeaconToAndCall(beacon, data, false);
    }

    /**
     * @dev If the admin is not set, the fallback function is used to initialize the proxy.
     * @dev If the admin is set, the fallback function is used to delegatecall the implementation.
     */
    function _fallback() internal override (TransparentUpgradeableProxy, Proxy) {
        if (_getAdmin() == address(0)) {
            bytes memory ret;
            bytes4 selector = msg.sig;
            if (selector == ITransparentUpgradeableBeaconProxy.initialize.selector) {
                ret = _dispatchInitialize();
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    return(add(ret, 0x20), mload(ret))
                }
            }
            // When the admin is not set, the fallback function is used to initialize the proxy.
            revert InvalidInitialization();
        }
        TransparentUpgradeableProxy._fallback();
    }

    /**
     * Returns the current implementation address.
     * @dev This is the implementation address set by the admin, or the beacon implementation.
     */
    function _implementation() internal view override (ERC1967Proxy, BeaconProxy) returns (address) {
        address implementation = ERC1967Proxy._implementation();
        if (implementation != address(0)) {
            return implementation;
        }
        return BeaconProxy._implementation();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/beacon/BeaconProxy.sol)

// Note: This implementation is an exact copy with the constructor removed, and pragma and imports updated.

pragma solidity ^0.8.19;

import "@openzeppelin/contracts/proxy/beacon/IBeacon.sol";
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/proxy/ERC1967/ERC1967Upgrade.sol";

/**
 * @dev This contract implements a proxy that gets the implementation address for each call from an {UpgradeableBeacon}.
 *
 * The beacon address is stored in storage slot `uint256(keccak256('eip1967.proxy.beacon')) - 1`, so that it doesn't
 * conflict with the storage layout of the implementation behind the proxy.
 *
 * _Available since v3.4._
 */
contract BeaconProxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Returns the current beacon address.
     */
    function _beacon() internal view virtual returns (address) {
        return _getBeacon();
    }

    /**
     * @dev Returns the current implementation address of the associated beacon.
     */
    function _implementation() internal view virtual override returns (address) {
        return IBeacon(_getBeacon()).implementation();
    }

    /**
     * @dev Changes the proxy to use a new beacon. Deprecated: see {_upgradeBeaconToAndCall}.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon.
     *
     * Requirements:
     *
     * - `beacon` must be a contract.
     * - The implementation returned by `beacon` must be a contract.
     */
    function _setBeacon(address beacon, bytes memory data) internal virtual {
        _upgradeBeaconToAndCall(beacon, data, false);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/ERC1967/ERC1967Proxy.sol)

// Note: This implementation is an exact copy with the constructor removed, and pragma and imports updated.

pragma solidity ^0.8.19;

import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/proxy/ERC1967/ERC1967Upgrade.sol";

/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/transparent/TransparentUpgradeableProxy.sol)

/// @notice This implementation is a copy of OpenZeppelin's with the following changes:
/// - Pragma updated
/// - Imports updated
/// - Constructor removed
/// - Allows admin to call implementation

pragma solidity ^0.8.19;

import "./ERC1967Proxy.sol";

/**
 * @dev Interface for {TransparentUpgradeableProxy}. In order to implement transparency, {TransparentUpgradeableProxy}
 * does not implement this interface directly, and some of its functions are implemented by an internal dispatch
 * mechanism. The compiler is unaware that these functions are implemented by {TransparentUpgradeableProxy} and will not
 * include them in the ABI so this interface must be used to interact with it.
 */
interface ITransparentUpgradeableProxy is IERC1967 {
    function admin() external view returns (address);

    function implementation() external view returns (address);

    function changeAdmin(address) external;

    function upgradeTo(address) external;

    function upgradeToAndCall(address, bytes memory) external payable;
}

/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * Unlike the original OpenZeppelin implementation, this contract does not prevent the admin from calling the implementation.
 * This potentially exposes the admin to a proxy selector attack. See
 * https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector clashing].
 * When using this contract, you must ensure that the implementation function selectors do not clash with the proxy selectors.
 * The proxy selectors are:
 * - 0x3659cfe6: upgradeTo
 * - 0x4f1ef286: upgradeToAndCall
 * - 0x8f283970: changeAdmin
 * - 0xf851a440: admin
 * - 0x5c60da1b: implementation
 *
 * NOTE: The real interface of this proxy is that defined in `ITransparentUpgradeableProxy`. This contract does not
 * inherit from that interface, and instead the admin functions are implicitly implemented using a custom dispatch
 * mechanism in `_fallback`. Consequently, the compiler will not produce an ABI for this contract. This is necessary to
 * fully implement transparency without decoding reverts caused by selector clashes between the proxy and the
 * implementation.
 *
 * WARNING: It is not recommended to extend this contract to add additional external functions. If you do so, the compiler
 * will not check that there are no selector conflicts, due to the note above. A selector clash between any new function
 * and the functions declared in {ITransparentUpgradeableProxy} will be resolved in favor of the new one. This could
 * render the admin operations inaccessible, which could prevent upgradeability. Transparency may also be compromised.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     *
     * CAUTION: This modifier is deprecated, as it could cause issues if the modified function has arguments, and the
     * implementation provides a function with the same selector.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }

    /**
     * @dev If caller is the admin process the call internally, otherwise transparently fallback to the proxy behavior
     */
    function _fallback() internal virtual override {
        if (msg.sender == _getAdmin()) {
            bytes memory ret;
            bytes4 selector = msg.sig;
            if (selector == ITransparentUpgradeableProxy.upgradeTo.selector) {
                ret = _dispatchUpgradeTo();
            } else if (selector == ITransparentUpgradeableProxy.upgradeToAndCall.selector) {
                ret = _dispatchUpgradeToAndCall();
            } else if (selector == ITransparentUpgradeableProxy.changeAdmin.selector) {
                ret = _dispatchChangeAdmin();
            } else if (selector == ITransparentUpgradeableProxy.admin.selector) {
                ret = _dispatchAdmin();
            } else if (selector == ITransparentUpgradeableProxy.implementation.selector) {
                ret = _dispatchImplementation();
            } else {
                // Call implementation
                return super._fallback();
            }
            assembly {
                return(add(ret, 0x20), mload(ret))
            }
        } else {
            super._fallback();
        }
    }

    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function _dispatchAdmin() private returns (bytes memory) {
        _requireZeroValue();

        address admin = _getAdmin();
        return abi.encode(admin);
    }

    /**
     * @dev Returns the current implementation.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function _dispatchImplementation() private returns (bytes memory) {
        _requireZeroValue();

        address implementation = _implementation();
        return abi.encode(implementation);
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _dispatchChangeAdmin() private returns (bytes memory) {
        _requireZeroValue();

        address newAdmin = abi.decode(msg.data[4:], (address));
        _changeAdmin(newAdmin);

        return "";
    }

    /**
     * @dev Upgrade the implementation of the proxy.
     */
    function _dispatchUpgradeTo() private returns (bytes memory) {
        _requireZeroValue();

        address newImplementation = abi.decode(msg.data[4:], (address));
        _upgradeToAndCall(newImplementation, bytes(""), false);

        return "";
    }

    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     */
    function _dispatchUpgradeToAndCall() private returns (bytes memory) {
        (address newImplementation, bytes memory data) = abi.decode(msg.data[4:], (address, bytes));
        _upgradeToAndCall(newImplementation, data, true);

        return "";
    }

    /**
     * @dev Returns the current admin.
     *
     * CAUTION: This function is deprecated. Use {ERC1967Upgrade-_getAdmin} instead.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }

    /**
     * @dev To keep this contract fully transparent, all `ifAdmin` functions must be payable. This helper is here to
     * emulate some proxy functions being non-payable while still allowing value to pass through.
     */
    function _requireZeroValue() internal {
        require(msg.value == 0);
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

import {
    ERC1155Supply, ERC1155
} from "@0xsequence/contracts-library/tokens/ERC1155/extensions/supply/ERC1155Supply.sol";
import {ERC1155Metadata} from "@0xsequence/erc-1155/contracts/tokens/ERC1155/ERC1155Metadata.sol";
import {ERC2981Controlled} from "@0xsequence/contracts-library/tokens/common/ERC2981Controlled.sol";

error InvalidInitialization();

/**
 * A standard base implementation of ERC-1155 for use in Sequence library contracts.
 */
abstract contract ERC1155BaseToken is ERC1155Supply, ERC1155Metadata, ERC2981Controlled {
    bytes32 internal constant METADATA_ADMIN_ROLE = keccak256("METADATA_ADMIN_ROLE");

    string private _contractURI;

    /**
     * Deploy contract.
     */
    constructor() ERC1155Metadata("", "") {}

    /**
     * Initialize the contract.
     * @param owner Owner address.
     * @param tokenName Token name.
     * @param tokenBaseURI Base URI for token metadata.
     * @param tokenContractURI Contract URI for token metadata.
     * @dev This should be called immediately after deployment.
     */
    function _initialize(
        address owner,
        string memory tokenName,
        string memory tokenBaseURI,
        string memory tokenContractURI
    )
        internal
    {
        name = tokenName;
        baseURI = tokenBaseURI;
        _contractURI = tokenContractURI;

        _grantRole(DEFAULT_ADMIN_ROLE, owner);
        _grantRole(ROYALTY_ADMIN_ROLE, owner);
        _grantRole(METADATA_ADMIN_ROLE, owner);
    }

    //
    // Metadata
    //

    /**
     * Update the base URI of token's URI.
     * @param tokenBaseURI New base URI of token's URI
     */
    function setBaseMetadataURI(string memory tokenBaseURI) external onlyRole(METADATA_ADMIN_ROLE) {
        _setBaseMetadataURI(tokenBaseURI);
    }

    /**
     * Update the name of the contract.
     * @param tokenName New contract name
     */
    function setContractName(string memory tokenName) external onlyRole(METADATA_ADMIN_ROLE) {
        _setContractName(tokenName);
    }

    /**
     * Update the contract URI of token's URI.
     * @param tokenContractURI New contract URI of token's URI
     * @notice Refer to https://docs.opensea.io/docs/contract-level-metadata
     */
    function setContractURI(string memory tokenContractURI) external onlyRole(METADATA_ADMIN_ROLE) {
        _contractURI = tokenContractURI;
    }

    //
    // Burn
    //

    /**
     * Allows the owner of the token to burn their tokens.
     * @param tokenId Id of token to burn
     * @param amount Amount of tokens to burn
     */
    function burn(uint256 tokenId, uint256 amount) public virtual {
        _burn(msg.sender, tokenId, amount);
    }

    /**
     * Burn tokens of given token id for each (tokenIds[i], amounts[i]) pair.
     * @param tokenIds Array of token ids to burn
     * @param amounts Array of the amount to be burned
     */
    function batchBurn(uint256[] memory tokenIds, uint256[] memory amounts) public virtual {
        _batchBurn(msg.sender, tokenIds, amounts);
    }

    //
    // Views
    //

    /**
     * Get the contract URI of token's URI.
     * @return Contract URI of token's URI
     * @notice Refer to https://docs.opensea.io/docs/contract-level-metadata
     */
    function contractURI() public view returns (string memory) {
        return _contractURI;
    }

    /**
     * Check interface support.
     * @param interfaceId Interface id
     * @return True if supported
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override (ERC1155Supply, ERC1155Metadata, ERC2981Controlled)
        returns (bool)
    {
        return ERC1155Supply.supportsInterface(interfaceId) || ERC1155Metadata.supportsInterface(interfaceId)
            || ERC2981Controlled.supportsInterface(interfaceId) || super.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

import {ERC1155} from "@0xsequence/erc-1155/contracts/tokens/ERC1155/ERC1155.sol";
import {
    IERC1155Supply,
    IERC1155SupplyFunctions
} from "@0xsequence/contracts-library/tokens/ERC1155/extensions/supply/IERC1155Supply.sol";

/**
 * An ERC-1155 extension that tracks token supply.
 */
abstract contract ERC1155Supply is ERC1155, IERC1155Supply {
    // Current supply
    uint256 public totalSupply;
    mapping(uint256 => uint256) public tokenSupply;

    /**
     * Mint _amount of tokens of a given id
     * @param _to The address to mint tokens to
     * @param _id Token id to mint
     * @param _amount The amount to be minted
     * @param _data Data to pass if receiver is contract
     */
    function _mint(address _to, uint256 _id, uint256 _amount, bytes memory _data) internal virtual {
        totalSupply += _amount;
        tokenSupply[_id] += _amount;
        balances[_to][_id] += _amount;

        emit TransferSingle(msg.sender, address(0x0), _to, _id, _amount);

        _callonERC1155Received(address(0x0), _to, _id, _amount, gasleft(), _data);
    }

    /**
     * Mint tokens for each ids in _ids
     * @param _to The address to mint tokens to
     * @param _ids Array of ids to mint
     * @param _amounts Array of amount of tokens to mint per id
     * @param _data Data to pass if receiver is contract
     */
    function _batchMint(address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
        internal
        virtual
    {
        uint256 nMint = _ids.length;
        if (nMint != _amounts.length) {
            revert InvalidArrayLength();
        }

        // Executing all minting
        uint256 totalAmount = 0;
        for (uint256 i = 0; i < nMint; i++) {
            // Update storage balance
            balances[_to][_ids[i]] += _amounts[i];
            tokenSupply[_ids[i]] += _amounts[i];
            totalAmount += _amounts[i];
        }
        totalSupply += totalAmount;

        emit TransferBatch(msg.sender, address(0x0), _to, _ids, _amounts);

        // Calling onReceive method if recipient is contract
        _callonERC1155BatchReceived(address(0x0), _to, _ids, _amounts, gasleft(), _data);
    }

    /**
     * Burn _amount of tokens of a given token id
     * @param _from The address to burn tokens from
     * @param _id Token id to burn
     * @param _amount The amount to be burned
     */
    function _burn(address _from, uint256 _id, uint256 _amount) internal virtual {
        // Supply
        totalSupply -= _amount;
        tokenSupply[_id] -= _amount;

        // Balances
        balances[_from][_id] -= _amount;

        // Emit event
        emit TransferSingle(msg.sender, _from, address(0x0), _id, _amount);
    }

    /**
     * Burn tokens of given token id for each (_ids[i], _amounts[i]) pair
     * @param _from The address to burn tokens from
     * @param _ids Array of token ids to burn
     * @param _amounts Array of the amount to be burned
     */
    function _batchBurn(address _from, uint256[] memory _ids, uint256[] memory _amounts) internal virtual {
        uint256 nBurn = _ids.length;
        if (nBurn != _amounts.length) {
            revert InvalidArrayLength();
        }

        uint256 totalAmount = 0;
        for (uint256 i = 0; i < nBurn; i++) {
            // Update balances
            balances[_from][_ids[i]] -= _amounts[i];
            tokenSupply[_ids[i]] -= _amounts[i];
            totalAmount += _amounts[i];
        }
        totalSupply -= totalAmount;

        // Emit batch mint event
        emit TransferBatch(msg.sender, _from, address(0x0), _ids, _amounts);
    }

    //
    // Views
    //

    /**
     * Check interface support.
     * @param interfaceId Interface id
     * @return True if supported
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override (ERC1155) returns (bool) {
        return type(IERC1155SupplyFunctions).interfaceId == interfaceId || super.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

interface IERC1155SupplyFunctions {

    /**
     * Returns the total supply of ERC1155 tokens.
     */
    function totalSupply() external returns (uint256);

    /**
     * Returns the total supply of a given ERC1155 token.
     * @param tokenId The ERC1155 token id.
     */
    function tokenSupply(uint256 tokenId) external returns (uint256);
}

interface IERC1155SupplySignals {

    /**
     * Invalid array input length.
     */
    error InvalidArrayLength();
}

interface IERC1155Supply is IERC1155SupplySignals {}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

import {
    IERC1155Items,
    IERC1155ItemsFunctions
} from "@0xsequence/contracts-library/tokens/ERC1155/presets/items/IERC1155Items.sol";
import {ERC1155BaseToken} from "@0xsequence/contracts-library/tokens/ERC1155/ERC1155BaseToken.sol";
import {ERC2981Controlled} from "@0xsequence/contracts-library/tokens/common/ERC2981Controlled.sol";

/**
 * An implementation of ERC-1155 capable of minting when role provided.
 */
contract ERC1155Items is ERC1155BaseToken, IERC1155Items {
    bytes32 internal constant MINTER_ROLE = keccak256("MINTER_ROLE");

    address private immutable initializer;
    bool private initialized;

    constructor() {
        initializer = msg.sender;
    }

    /**
     * Initialize the contract.
     * @param owner Owner address
     * @param tokenName Token name
     * @param tokenBaseURI Base URI for token metadata
     * @param tokenContractURI Contract URI for token metadata
     * @param royaltyReceiver Address of who should be sent the royalty payment
     * @param royaltyFeeNumerator The royalty fee numerator in basis points (e.g. 15% would be 1500)
     * @dev This should be called immediately after deployment.
     */
    function initialize(
        address owner,
        string memory tokenName,
        string memory tokenBaseURI,
        string memory tokenContractURI,
        address royaltyReceiver,
        uint96 royaltyFeeNumerator
    )
        public
        virtual
    {
        if (msg.sender != initializer || initialized) {
            revert InvalidInitialization();
        }

        ERC1155BaseToken._initialize(owner, tokenName, tokenBaseURI, tokenContractURI);
        _setDefaultRoyalty(royaltyReceiver, royaltyFeeNumerator);

        _grantRole(MINTER_ROLE, owner);

        initialized = true;
    }

    //
    // Minting
    //

    /**
     * Mint tokens.
     * @param to Address to mint tokens to.
     * @param tokenId Token ID to mint.
     * @param amount Amount of tokens to mint.
     * @param data Data to pass if receiver is contract.
     */
    function mint(address to, uint256 tokenId, uint256 amount, bytes memory data) external onlyRole(MINTER_ROLE) {
        _mint(to, tokenId, amount, data);
    }

    /**
     * Mint tokens.
     * @param to Address to mint tokens to.
     * @param tokenIds Token IDs to mint.
     * @param amounts Amounts of tokens to mint.
     * @param data Data to pass if receiver is contract.
     */
    function batchMint(address to, uint256[] memory tokenIds, uint256[] memory amounts, bytes memory data)
        external
        onlyRole(MINTER_ROLE)
    {
        _batchMint(to, tokenIds, amounts, data);
    }

    //
    // Views
    //

    /**
     * Check interface support.
     * @param interfaceId Interface id
     * @return True if supported
     */
    function supportsInterface(bytes4 interfaceId) public view override (ERC1155BaseToken) returns (bool) {
        return type(IERC1155ItemsFunctions).interfaceId == interfaceId || ERC1155BaseToken.supportsInterface(interfaceId)
            || super.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

interface IERC1155ItemsFunctions {
    /**
     * Mint tokens.
     * @param to Address to mint tokens to.
     * @param tokenId Token ID to mint.
     * @param amount Amount of tokens to mint.
     * @param data Data to pass if receiver is contract.
     */
    function mint(address to, uint256 tokenId, uint256 amount, bytes memory data) external;

    /**
     * Mint tokens.
     * @param to Address to mint tokens to.
     * @param tokenIds Token IDs to mint.
     * @param amounts Amounts of tokens to mint.
     * @param data Data to pass if receiver is contract.
     */
    function batchMint(address to, uint256[] memory tokenIds, uint256[] memory amounts, bytes memory data) external;
}

interface IERC1155ItemsSignals {
    /**
     * Invalid initialization error.
     */
    error InvalidInitialization();
}

interface IERC1155Items is IERC1155ItemsFunctions, IERC1155ItemsSignals {}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

interface IERC1155ItemsFactoryFunctions {
    /**
     * Creates an ERC-1155 Items proxy.
     * @param proxyOwner The owner of the ERC-1155 Items proxy
     * @param tokenOwner The owner of the ERC-1155 Items implementation
     * @param name The name of the ERC-1155 Items proxy
     * @param baseURI The base URI of the ERC-1155 Items proxy
     * @param contractURI The contract URI of the ERC-1155 Items proxy
     * @param royaltyReceiver Address of who should be sent the royalty payment
     * @param royaltyFeeNumerator The royalty fee numerator in basis points (e.g. 15% would be 1500)
     * @return proxyAddr The address of the ERC-1155 Items Proxy
     */
    function deploy(
        address proxyOwner,
        address tokenOwner,
        string memory name,
        string memory baseURI,
        string memory contractURI,
        address royaltyReceiver,
        uint96 royaltyFeeNumerator
    )
        external
        returns (address proxyAddr);
}

interface IERC1155ItemsFactorySignals {
    /**
     * Event emitted when a new ERC-1155 Items proxy contract is deployed.
     * @param proxyAddr The address of the deployed proxy.
     */
    event ERC1155ItemsDeployed(address proxyAddr);
}

interface IERC1155ItemsFactory is IERC1155ItemsFactoryFunctions, IERC1155ItemsFactorySignals {}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

import {IERC2981Controlled} from "@0xsequence/contracts-library/tokens/common/IERC2981Controlled.sol";
import {ERC2981} from "@openzeppelin/contracts/token/common/ERC2981.sol";
import {AccessControlEnumerable} from "@openzeppelin/contracts/access/AccessControlEnumerable.sol";

/**
 * An implementation of ERC-2981 that allows updates by roles.
 */
abstract contract ERC2981Controlled is ERC2981, AccessControlEnumerable, IERC2981Controlled {
    bytes32 internal constant ROYALTY_ADMIN_ROLE = keccak256("ROYALTY_ADMIN_ROLE");

    //
    // Royalty
    //

    /**
     * Sets the royalty information that all ids in this contract will default to.
     * @param receiver Address of who should be sent the royalty payment
     * @param feeNumerator The royalty fee numerator in basis points (e.g. 15% would be 1500)
     */
    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external onlyRole(ROYALTY_ADMIN_ROLE) {
        _setDefaultRoyalty(receiver, feeNumerator);
    }

    /**
     * Sets the royalty information that a given token id in this contract will use.
     * @param tokenId The token id to set the royalty information for
     * @param receiver Address of who should be sent the royalty payment
     * @param feeNumerator The royalty fee numerator in basis points (e.g. 15% would be 1500)
     * @notice This overrides the default royalty information for this token id
     */
    function setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator)
        external
        onlyRole(ROYALTY_ADMIN_ROLE)
    {
        _setTokenRoyalty(tokenId, receiver, feeNumerator);
    }

    //
    // Views
    //

    /**
     * Check interface support.
     * @param interfaceId Interface id
     * @return True if supported
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override (ERC2981, AccessControlEnumerable)
        returns (bool)
    {
        return ERC2981.supportsInterface(interfaceId) || AccessControlEnumerable.supportsInterface(interfaceId)
            || type(IERC2981Controlled).interfaceId == interfaceId || super.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.19;

interface IERC2981ControlledFunctions {
    /**
     * Sets the royalty information that all ids in this contract will default to.
     * @param receiver Address of who should be sent the royalty payment
     * @param feeNumerator The royalty fee numerator in basis points (e.g. 15% would be 1500)
     */
    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external;

    /**
     * Sets the royalty information that a given token id in this contract will use.
     * @param tokenId The token id to set the royalty information for
     * @param receiver Address of who should be sent the royalty payment
     * @param feeNumerator The royalty fee numerator in basis points (e.g. 15% would be 1500)
     * @notice This overrides the default royalty information for this token id
     */
    function setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) external;
}

interface IERC2981Controlled is IERC2981ControlledFunctions {}

{
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 20000
  },
  "remappings": [
    ":@0xsequence/contracts-library/=src/",
    ":@0xsequence/erc-1155/=node_modules/@0xsequence/erc-1155/",
    ":@0xsequence/erc20-meta-token/=node_modules/@0xsequence/erc20-meta-token/",
    ":@openzeppelin/=node_modules/@openzeppelin/",
    ":ds-test/=lib/forge-std/lib/ds-test/src/",
    ":erc721a-upgradeable/=node_modules/erc721a-upgradeable/",
    ":erc721a/=node_modules/erc721a/",
    ":forge-std/=lib/forge-std/src/",
    ":murky/=lib/murky/src/",
    ":openzeppelin-contracts/=lib/murky/lib/openzeppelin-contracts/"
  ],
  "viaIR": true,
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"factoryOwner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"proxyAddr","type":"address"}],"name":"ERC1155ItemsDeployed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"beacon","outputs":[{"internalType":"contract UpgradeableBeacon","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"proxyOwner","type":"address"},{"internalType":"address","name":"tokenOwner","type":"address"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"baseURI","type":"string"},{"internalType":"string","name":"contractURI","type":"string"},{"internalType":"address","name":"royaltyReceiver","type":"address"},{"internalType":"uint96","name":"royaltyFeeNumerator","type":"uint96"}],"name":"deploy","outputs":[{"internalType":"address","name":"proxyAddr","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"implementation","type":"address"}],"name":"upgradeBeacon","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000007a47e6bf40c1e0ed5c01ae42fdc75879140bc4

-----Decoded View---------------
Arg [0] : factoryOwner (address): 0x007a47e6BF40C1e0ed5c01aE42fDC75879140bc4

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000007a47e6bf40c1e0ed5c01ae42fdc75879140bc4